Difference between revisions of "Metal Shop"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | [[File:Level_3_badge.png|alt=Level | + | [[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]] |
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality. | Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality. | ||
| Line 53: | Line 53: | ||
|'''Metal Cutting Chop Saw'''<br> | |'''Metal Cutting Chop Saw'''<br> | ||
'''14" blade''' | '''14" blade''' | ||
| − | [[File:Level 3 badge.png|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] |
|[https://store.evolutionpowertools.com/ evolution POWER TOOLS] | |[https://store.evolutionpowertools.com/ evolution POWER TOOLS] | ||
| Line 61: | Line 61: | ||
|[[File:Metal band saw.jpg|alt=Metal band saw|center|frameless|200x200px]] | |[[File:Metal band saw.jpg|alt=Metal band saw|center|frameless|200x200px]] | ||
|'''metal band saw'''<br> | |'''metal band saw'''<br> | ||
| − | [[File:Level 3 badge.png|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] |
| − | |DoALL | + | | DoALL |
|M602 | |M602 | ||
|no | |no | ||
| Line 87: | Line 87: | ||
|'''shopmaster eldorado''' | |'''shopmaster eldorado''' | ||
'''bridge mill'''<br> | '''bridge mill'''<br> | ||
| − | [[File:Level 3 badge.png|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] |
|shopmaster | |shopmaster | ||
| | | | ||
| Line 140: | Line 140: | ||
|[[File:Grizzly Lathe.jpg|alt=Grizzly Lathe|center|frameless|150x150px]] | |[[File:Grizzly Lathe.jpg|alt=Grizzly Lathe|center|frameless|150x150px]] | ||
|'''combination machine<br>(Mill and Lathe)'''<br> | |'''combination machine<br>(Mill and Lathe)'''<br> | ||
| − | [[File:Level 3 badge.png|alt=Level | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] |
|[[File:Grizzly logo.png|alt=Grizzly logo|left|frameless|120x120px]] | |[[File:Grizzly logo.png|alt=Grizzly logo|left|frameless|120x120px]] | ||
|Grizzly | |Grizzly | ||
| Line 148: | Line 148: | ||
|[[File:Tool cabinet.jpg|center|frameless|160x160px]] | |[[File:Tool cabinet.jpg|center|frameless|160x160px]] | ||
|'''tool cabinet'''<br> | |'''tool cabinet'''<br> | ||
| − | [[File:Level 3 badge.png|alt=Level | + | [[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] |
|U.S. General | |U.S. General | ||
| | | | ||
| Line 157: | Line 157: | ||
|Manufacturer | |Manufacturer | ||
|Model<br>Number | |Model<br>Number | ||
| − | |Training<br>Materials | + | | Training<br>Materials |
|} | |} | ||
| Line 169: | Line 169: | ||
| style="vertical-align:middle;" |Picture | | style="vertical-align:middle;" |Picture | ||
|Item | |Item | ||
| − | |Manufacturer | + | | Manufacturer |
|Model<br>Number | |Model<br>Number | ||
|- | |- | ||
| Line 184: | Line 184: | ||
|'''Angle Grinder''' | |'''Angle Grinder''' | ||
|[[File:2560px-Milwaukee Logo.svg.png|alt=Milwaukee Logo|left|frameless|100x100px|link=https://wiki.pikespeakmakerspace.org/index.php/File:2560px-Milwaukee_Logo.svg.png]] | |[[File:2560px-Milwaukee Logo.svg.png|alt=Milwaukee Logo|left|frameless|100x100px|link=https://wiki.pikespeakmakerspace.org/index.php/File:2560px-Milwaukee_Logo.svg.png]] | ||
| − | |? | + | | ? |
|- | |- | ||
|[[File:Drill bit set Milwaukee.jpg|alt=Drill bit set Milwaukee|center|frameless|133x133px]] | |[[File:Drill bit set Milwaukee.jpg|alt=Drill bit set Milwaukee|center|frameless|133x133px]] | ||
| Line 206: | Line 206: | ||
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;" | |- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;" | ||
| style="vertical-align:middle;" |Picture | | style="vertical-align:middle;" |Picture | ||
| − | |Item | + | | Item |
|Manufacturer | |Manufacturer | ||
|Model<br>Number | |Model<br>Number | ||
| Line 220: | Line 220: | ||
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make. | :Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make. | ||
| − | ==Benefits and Policies== | + | ==Benefits and Policies == |
{{Member Benefits}} | {{Member Benefits}} | ||
===Materials=== | ===Materials=== | ||
| Line 241: | Line 241: | ||
:[[Autodesk Fusion 360 Tips|'''Autodesk Fusion 360 Tips''']] | :[[Autodesk Fusion 360 Tips|'''Autodesk Fusion 360 Tips''']] | ||
| − | ==Curated Links == | + | ==Curated Links== |
Links to member-recommended external sites: | Links to member-recommended external sites: | ||
:'''[https://www.machsupport.com/software/mach3/ Mach 3]''' — control motors (stepper & servo) by processing G-Code. | :'''[https://www.machsupport.com/software/mach3/ Mach 3]''' — control motors (stepper & servo) by processing G-Code. | ||
Revision as of 21:21, 25 July 2023
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.
The Metal Shop Area at PPM consists mostly of Level 3 equipment.
Additional training and certification is required to use any of our Level 3 equipment.
Metal Shop Area hand tools should be marked with pink tape or paint or powder coating.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
in the Vented Room
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Area Leader — Josh Harlow
- To help out in the Metal Shop Area contact the Area Leader on Slack.
Classes
- Classes for the the Grizzly combination machine are split into individual Mill and Lathe Classes.
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
Links to external sites:
- Evolution Power Tools — on YouTube
- G-code — Wikipedia entry
Tips
- Let the tool do the work. Don't force it.
- Before using air tools add 1 drop of air tool oil
For Additional Help
- Use the PPM Slack channel #metal-shop
- List of all PPM Slack channels
- Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
Equipment Lists
Metal Shop Equipment
| Picture | Item | Manufacturer | Model Number |
Training Materials |
 |
Metal Cutting Chop Saw 14" blade  |
evolution POWER TOOLS | evoSAW | yes |
 |
metal band saw |
DoALL | M602 | no |
 |
5 in.
Bench Grinder on stand |
CRAFTSMAN | ||
 |
6 in.
Bench Grinder on stand |
CRAFTSMAN | ||
| shopmaster eldorado
bridge mill |
shopmaster | yes | ||
| BENDING BRAKE
30 inch |
CENTRAL MACHINERY | 61791 | Owner's Manual | |
| vacuum
former |
PLAST-O-CRAFT | |||
| TOOL PRESS
1/2 TON |
JANESVILLE | ILP-500 | ON LINE | |
| METAL
BAND SAW (horizontal) |
WELLS | Wellsaw 58B | Review | |
| Picture | Item | Manufacturer | Model Number |
Training Materials |
Lathe Equipment
| Picture | Item | Manufacturer | Model Number |
Training Materials |
 |
combination machine (Mill and Lathe) |
 |
Grizzly | online |
 |
tool cabinet |
U.S. General | ||
| Picture | Item | Manufacturer | Model Number |
Training Materials |
Grizzly G0516 Mill/Drill/Lathe
WARNING
Hand Tools
| Picture | Item | Manufacturer | Model Number |
 |
4-1/2" Small
Angle Grinder with Lock-On Paddle Switch |
Milwaukee | |
 |
Angle Grinder | ? | |
 |
Drill Bit Set,
29 pieces, Titanium |
Milwaukee | |
 |
Punch Set in plastic case | Wheeler | product page |
 |
vise grips | ||
| Picture | Item | Manufacturer | Model Number |
- Metal Shop Area hand tools should be marked with pink tape or paint or powder coating.
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Equipment Reservations
Donations Received
Wish List
- Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
| Company | Website | Benefit | Directions to |
 |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway |
 |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue |
 |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. |
 |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Materials
- Donate for "General Supplies" via PayPal: bit.ly/ppmstuff
- Or, leave donations in a black payment box, or use a QR code.
Red Tags
- If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues
- This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
See Also
Links to related PPM Wiki pages:
Curated Links
Links to member-recommended external sites:
- Mach 3 — control motors (stepper & servo) by processing G-Code.
- 80/20 — BUILD YOUR IDEA
- UNISTRUT — Metal Framing System
Other Fun Stuff
Links to external sites:
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.