Difference between revisions of "Vinyl Cutting"

Revision as of 23:08, 1 July 2023

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.

The Vinyl Cutting Area at PPM consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

use this when ordering pizza or an ambulance

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Area Contact -- Mathew Palfenier

To help out with the Vinyl Cutter, post your ideas and comments on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

- Pick the small Application Launcher button from CorelDRAW, and then "Send Cut Lines to CM3".

- If you receive a no Media Error, and your job pauses, try pressing ENTER to override the sensor and continue your cutting.

- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.

(e.g. Oracal ORAMASK 813 Stencil Film and Con-Tact brand paper)

Vinyl Cutter
Overview and Instructions.pdf

Tips

The vinyl cutting PC is not a design workstation. Please limit the use of the station to cutting only.

For Additional Help

Use the PPM Slack channel #vinyl-cutter

List of all PPM Slack channels

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Equipment Lists

24" Graphtec cutter

Picture	Item	Manufacturer	Model	Manual
	24" Cutting Plotter	Graphtec	CE5000‑60	yes
Picture	Item	Manufacturer	Model	Manual

Vinyl Cutting Computer

Picture	Item	Manufacturer/ Model	System Software	Application Software
	PC	HP h8-1117c	Windows 10 Pro	CorelDRAW X6, Cutting Master 3, Graphtec Pro Studio

	monitor	Dell 1905FP
	wired mouse and keyboard	Amazon, Dell
Picture	Item	Manufacturer/ Model	System Software	Application Software

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Equipment Reservations

Materials

Donate for "Vinyl Stickers and R Tape" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

Some vinyl materials contain PVC. Do not use these on either of our laser engravers.

(e.g. Oracal ORAMASK 813 Stencil Film and Con-Tact brand paper

Red Tags

Scrap and Trash

Trash day is MONDAY

Recycling day is MONDAY (96 gallon tote)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty recycling and trash into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Related Software

Links to other PPM Wiki pages:

CorelDRAW X6 Tips

Cutting Master 3 Tips

Member Showcase

TECHWEARS
vinyl sign
Round PCB
PPM clock
(February 2020)
Vinyl sign.jpg

Vinyl sign
in 3D Printing Area
Outdoor window sign
for our Makerspace
original sign in
MAC parking lot
vinyl sign for
MAC parking lot
by Warren Jokinen
vinyl sign for
MAC parking lot
by Warren Jokinen
vinyl sign for
MAC parking lot
by Warren Jokinen
vinyl sign for
MAC parking lot
by Warren Jokinen
vinyl sign for
MAC parking lot
by Warren Jokinen
Dewey
by Nicolas Ordahl
Rockclimber
by Nick T.

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Curated Links

Links to external sites:

CE6000 Series Video Training

Other Fun Stuff