Difference between revisions of "Vented Room"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
:Pikes Peak Makerspace announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup'''] | :Pikes Peak Makerspace announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup'''] | ||
===Training=== | ===Training=== | ||
| + | '''Step-By-Step Process for Using the Vented Room''' | ||
| + | |||
| + | * Set fan and timer | ||
| + | * Sign in with QR code | ||
| + | * Setup paper | ||
| + | * Wear PPE | ||
| + | * Put away all holding stands and materials after the final coat | ||
| + | * Absolutely no paint or finishing materials left out, ever | ||
| + | * Remove workpiece as soon as dry | ||
| + | * Items left more than 12 hours will be removed | ||
| + | |||
| + | '''Rules for the Vented Room''' | ||
| + | |||
| + | * All hazardous chemicals, including spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the vented room | ||
| + | * Review the Safety Data Sheet (SDS) information of unknown products before use | ||
| + | * SDS information is available via the QR code on the hazardous chemical storage cabinet | ||
| + | * Do not bring dangerous chemicals to the makerspace | ||
| + | * Must be continuously ventilated during occupied hours | ||
| + | * Take frequent fresh air breaks while painting | ||
| + | * Leave painted areas if you experience eye watering, headaches, dizziness, or breathing problems | ||
| + | * Turn on the timer and leave the door closed while in use | ||
| + | * When done, leave timer on to continue ventilating the room properly | ||
| + | * Use the correct P.P.E (Personal Protective Equipment) when you’re painting. Items such as a spray painting mask, and gloves are vital | ||
| + | * Before you start to use your spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of harm. | ||
| + | * Clean your entire area after your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away | ||
| + | * Do not leave anything out long term | ||
===For Additional Help=== | ===For Additional Help=== | ||
| Line 39: | Line 65: | ||
| | | | ||
|- | |- | ||
| − | |[[File: | + | |[[File:VentedRoom4.jpg|alt=Flammable Cabinet|center|frameless|200x200px]] |
|'''Flammable material<br>storage cabinet,''' | |'''Flammable material<br>storage cabinet,''' | ||
Revision as of 22:49, 15 October 2022
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.
We provide a vented, well-lit room for painting and staining, and so forth. It is roughly 14 x 6.5 sq. ft. (730 cu. ft.)
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
in the Vented Room
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
New Member Orientation
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
Training
Step-By-Step Process for Using the Vented Room
- Set fan and timer
- Sign in with QR code
- Setup paper
- Wear PPE
- Put away all holding stands and materials after the final coat
- Absolutely no paint or finishing materials left out, ever
- Remove workpiece as soon as dry
- Items left more than 12 hours will be removed
Rules for the Vented Room
- All hazardous chemicals, including spray paint, stains, and other approved items must be stored in the yellow hazardous chemical storage cabinet located in the vented room
- Review the Safety Data Sheet (SDS) information of unknown products before use
- SDS information is available via the QR code on the hazardous chemical storage cabinet
- Do not bring dangerous chemicals to the makerspace
- Must be continuously ventilated during occupied hours
- Take frequent fresh air breaks while painting
- Leave painted areas if you experience eye watering, headaches, dizziness, or breathing problems
- Turn on the timer and leave the door closed while in use
- When done, leave timer on to continue ventilating the room properly
- Use the correct P.P.E (Personal Protective Equipment) when you’re painting. Items such as a spray painting mask, and gloves are vital
- Before you start to use your spray cans, make sure that you store them away from heat and fire. The aerosols are highly combustible, and will cause a lot of damage and potentially a lot of harm.
- Clean your entire area after your job is complete; including, but not limited to, tables, walls, floors, cabinets, all materials put away
- Do not leave anything out long term
For Additional Help
- Use the PPM Slack channel #general
Equipment List
Vented Room Equipment
| Picture | Item | Manufacturer | Model Number |
Estimated Value |
Owner | Status | Problem Description |
|---|---|---|---|---|---|---|---|
| Exhaust fan | PPM | 4-hour timer installed (05/17/22) | |||||
 |
Flammable material storage cabinet, 43" wide 18" deep 65" tall |
A&A SHEET METAL PRODUCTS, INC. | A245 | $950 |
PPM | ||
| storage cabinet,
metal (grey) |
? |
PPM | |||||
| storage cabinet, metal, with key, (tan) | ? |
PPM | |||||
| DESIGN STATION ONE
68"x 34" work surface, on wheels |
PPM | ? |
PPM | ||||
| DESIGN STATION TWO
73"x 34" work surface, on wheels |
PPM | ? |
PPM | ||||
Number |
Value |
Description |
Flammables cabinet label
Hand Tools
- Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
Donations Received
Wish List
Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
- Explosion Proof Fan (06/24/22)
Benefits and Policies
- PPM members enjoy discounts at the following local merchants:
- (bring proof of membership)
| Company | Website | Benefit | Directions to |
 |
Woodcraft of Colorado Springs | 10% discount | 4438 Austin Bluffs Parkway |
 |
CO Lumber Specialties | 10% discount | 3636 Stone Avenue |
 |
GENERAL AIR | 10% discount | 3031 N Nevada Ave. |
 |
ACE Hardware Uintah Gardens | 10% discount | 1830 W Uintah Street |
- Map of stores that provide PPM member discounts
- Map of helpful local resources curated by our makers
- At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
- The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.
Equipment Reservations
Materials
Safety Data Sheets
Review SDS information of unknown products before use. SDS available here and via QR code in hazardous chemical storage.
Do not bring dangerous chemicals to the space.
Spray paint, stains, and other approved items must be sto in the flammables cabinet in the vented room.
Do not paint indoors.
Spill Clean-up Kit
Red Tags
- Use a Red Tag, which can be found in the red tag area, to designate broken equipment.
Scrap and Trash
- Trash day is MONDAY
- Recycling day is MONDAY (96 gallon tote)
- Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
- Empty recycling and trash into our dumpster at the back (south side) of the building.
- Always leave the space better than you found it.
Other Fun Stuff
Links to other sites (external links):
- Bill Making Stuff -- "Scratch Builder" on YouTube
Search the PPM Wiki — include Content pages as well as Multimedia.
Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.