Difference between revisions of "Raspberry Pi"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
===For Help=== | ===For Help=== | ||
:Message in PPM Slack channel #electronics or #general | :Message in PPM Slack channel #electronics or #general | ||
| − | |||
:Or message Warren Jokinen on Slack | :Or message Warren Jokinen on Slack | ||
===Tips=== | ===Tips=== | ||
:At times the Pi 3 B+ may seem slow or unresponsive, so check the green light at the edge of the board for activity. | :At times the Pi 3 B+ may seem slow or unresponsive, so check the green light at the edge of the board for activity. | ||
| − | |||
:'''Raspberry Pi 3 Model B+ (2017) 1400 MHz,''' WolframMark Benchmark Result: 0.14 | :'''Raspberry Pi 3 Model B+ (2017) 1400 MHz,''' WolframMark Benchmark Result: 0.14 | ||
| − | |||
:'''Raspberry Pi 400 1800 MHz,''' WolframMark Benchmark Result: 0.23 | :'''Raspberry Pi 400 1800 MHz,''' WolframMark Benchmark Result: 0.23 | ||
| − | |||
:'''Raspberry Pi 4 Model B (2018), 2000 MHz,''' WolframMark Benchmark Result: 0.24 | :'''Raspberry Pi 4 Model B (2018), 2000 MHz,''' WolframMark Benchmark Result: 0.24 | ||
| Line 28: | Line 24: | ||
===Hardware === | ===Hardware === | ||
:1) Raspberry Pi 3 B+ (heatsinks, no case) for "Mall Map" | :1) Raspberry Pi 3 B+ (heatsinks, no case) for "Mall Map" | ||
| + | : | ||
::large HDMI (VIZIO) display with remote | ::large HDMI (VIZIO) display with remote | ||
| − | |||
::32GB SD card (no SSD) | ::32GB SD card (no SSD) | ||
| − | |||
::wired USB keyboard and mouse (Dell) | ::wired USB keyboard and mouse (Dell) | ||
| + | ::Wi-Fi connection | ||
| + | :: | ||
| − | + | :2) "Raspberry Pi Friendly" Dell monitors (quantity 5) | |
| − | |||
| − | :2) "Raspberry Pi Friendly" Dell monitors (quantity | ||
| − | |||
:3) Raspberry Pi with volumio audio player | :3) Raspberry Pi with volumio audio player | ||
| − | |||
:4) Raspberry Pi from Epilog engraver area | :4) Raspberry Pi from Epilog engraver area | ||
| − | |||
:5) Raspberry Pi from 3D Printer donation | :5) Raspberry Pi from 3D Printer donation | ||
Revision as of 17:15, 21 December 2021
Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, materials and a knowledge base to turn their ideas into reality.
Safety First
Members must know the following information:
- In case of emergency, call 911.
- Our physical location is:
- 735 East Pikes Peak Avenue
- Colorado Springs, CO 80903
- use this when ordering pizza or an ambulance
IN CASE OF
EMERGENCY
sign
PPM Fire Escape Plan
- Fire Escape Plan maps are posted throughout the Makerspace.
- There are 7 fire extinguishers on the fire escape plan map. Review the PPM Fire Escape Plan for locations.
PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan
First Aid
- There is a FIRST AID Supply Cabinet in our Kitchen Area.
- FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
FIRST AID
Supply Cabinet
FIRST AID
Kit
Eye Wash Stations
- Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
Emergency
Eye & Face Wash
Station
Personal Protective Equipment (PPE)
- Wear protective equipment in all Wood and Metal Shop Areas.
- Wear gloves when using Isopropyl Alcohol and other cleaners.
Personal Protective Equipment (PPE)
Hazardous Chemicals
- All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
- Review the Safety Data Sheet (SDS) information of unknown products before use.
- SDS information is available via the QR code on the hazardous chemical storage cabinet or this spreadsheet.
- Do not bring dangerous chemicals to the makerspace.
- Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
- Please DO NOT paint indoors.
Flammables Cabinet
in the Vented Room
Impairment
- The use of PPM equipment requires you to be alert, attentive, and focused.
- Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
Classes and Training
Area Captain
- Volunteers needed
Classes
- Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup
For Help
- Message in PPM Slack channel #electronics or #general
- Or message Warren Jokinen on Slack
Tips
- At times the Pi 3 B+ may seem slow or unresponsive, so check the green light at the edge of the board for activity.
- Raspberry Pi 3 Model B+ (2017) 1400 MHz, WolframMark Benchmark Result: 0.14
- Raspberry Pi 400 1800 MHz, WolframMark Benchmark Result: 0.23
- Raspberry Pi 4 Model B (2018), 2000 MHz, WolframMark Benchmark Result: 0.24
Equipment Lists
Hardware
- 1) Raspberry Pi 3 B+ (heatsinks, no case) for "Mall Map"
- large HDMI (VIZIO) display with remote
- 32GB SD card (no SSD)
- wired USB keyboard and mouse (Dell)
- Wi-Fi connection
- 2) "Raspberry Pi Friendly" Dell monitors (quantity 5)
- 3) Raspberry Pi with volumio audio player
- 4) Raspberry Pi from Epilog engraver area
- 5) Raspberry Pi from 3D Printer donation
Donations Received
Wish List
- Raspberry Pi 400 or 4 boards, etc.
Software
- 32-bit Raspberry Pi OS "Buster", (not "Bullseye", yet)
- Mathematica free license on every Raspberry Pi
- Python 3
- Microsoft Visual Studio Code
- etc.
Showcase
"Mall Map",
Work In Progress
Raspberry Pi
slideshow poster
RPi Workstation November 2021 
Raspberry Pi computers (Dec 2017) 
Raspberry Pi computers 
18x24" poster
of RPi Books
posters, including Raspberry Pi
slide 1, Intro 
slide 2, Hardware
.png)
.png)
Other Fun Stuff
MagPi the official Raspberry Pi magazine