3D Printing — Filament (FDM): Difference between revisions

Revision as of 17:58, 18 July 2023

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.

The 3D Printing Area at PPM consists mostly of Level 2 equipment.

Additional training is required to use our Level 2 equipment.
3D Printing Area hand tools should be marked with orange tape or paint.

Safety First

Members must know the following information:

In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

IN CASE OF
EMERGENCY
sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.

There are 7 fire extinguishers on the fire escape plan map.

Review the PPM Fire Escape Plan for locations.

PPM Emergency
Evacuation Plan.pdf
PPM Fire
Prevention Plan.pdf
PPM Fire Escape
Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.

FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.

FIRST AID
Supply Cabinet
FIRST AID
Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.

Emergency
Eye & Face Wash
Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.

Wear gloves when using Isopropyl Alcohol and other cleaners.

Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.

Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.

Review the Safety Data Sheet (SDS) information of unknown products before use.

SDS information is available via this spreadsheet.

Do not bring dangerous chemicals to the makerspace.

Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.

Please DO NOT paint indoors.

Flammables Cabinet
in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.

Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.

Classes and Training

New Member Orientation

Instructor — Josh Rafail

Area Contact — Mathew Palfenier

To help out in the 3D Printing Area contact us on Slack.

Classes

Pikes Peak Makerspace announces its Upcoming events, including classes, on Meetup

Training

Intro To 3D Printing — new class info from Josh Rafail

Events

3D Printing Area 2021-11-24

3D Printing Area
(2021-11-24)
3D Printing at the SUMMIT

3D Printing at the
PIKES PEAK SUMMIT

For Additional Help

Use the PPM Slack channel #3d-printing

List of all PPM Slack channels

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Equipment Lists

3D Printers

Picture	Item	Manufacturer/ Model	Print Volume	Upgrades
3D printer MEDUSA	3D Printer (MEDUSA)	PRUSA RESEARCH Prusa MK3	9.8 x 8.3 in, 8 in tall	Multi Material Unit (5 filaments)
File:3D printer HAYWIRE.jpg	3D Printer #1	PRUSA RESEARCH Prusa MK2.5S	9.8 x 8.3 in, 8 in tall
	3D Printer #2	PRUSA RESEARCH
	3D Printer #3	PRUSA RESEARCH
Monoprice 3D printer	3D Printer	Monoprice Mini E3D Edition	4.7x4.7x4.7"	SD card only. PLA ONLY.
Picture	Item	Manufacturer/ Model	Print Volume	Upgrades

3D Printing Equipment — Other

Picture	Item	Manufacturer
	lab oven / dryer with timer (12x12x12 interior)	Curtin Matheson
	IMPULSE HEAT SEALER 12" w cutter	Midwest Pacific, MP-12C
	filament dryer box	PPM
	3Doodler create	3Doodler STAR TREK
	Fume Extractor	PACE 8888-0825
Picture	Item	Manufacturer

IMPULSE SEALER
label

3D Printing — Computers

Picture	Item	Manufacturer/ Model	CPU	Memory	Storage	System Software	Application Software
	laptop computer	Dell				Windows 10	PrusaSlicer Lychee Slicer Repetier‑Server
Picture	Item	Manufacturer/ Model	CPU	Memory	Storage	System Software	Application Software

Hand Tools

INFRARED THERMOMETER

3D Printing Area hand tools should be marked with orange tape or paint.

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Donations Received

Wish List

Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.

Benefits and Policies

PPM members enjoy discounts at the following local merchants:

(bring proof of PPM membership)


Website	Benefit	Address
Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
CO Lumber Specialties	10% discount	3636 Stone Avenue
GENERAL AIR	10% discount	3031 N Nevada Ave.
ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Equipment Reservations

PPE

Donate for PPE

Or, leave donations in a black payment box, or use a QR code.

Materials

Filament For Sale
Material	Size/ Color	Website	Sale Price
Copolyester (1 kg spool, Factory Sealed)	2.85mm White	chromastrandslab.com	$20
PETG (1 kg spool, Factory Sealed)	1.75mm Clear	ic3dprinters.com	$20
PETG (1 kg spool, Factory Sealed)	1.75mm Clear	villageplastics.com/	$20

Donate for "3D Print Filament": bit.ly/ppmstuff

Filament Cost $0.02⁹ per Gram

Or, leave donations in a black payment box, or use a QR code.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tag-issues

This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Scrap and Trash

Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)

Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)

Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.

Empty interior trash cans into our dumpster at the back (south side) of the building.

Always leave the space better than you found it.

Related Software

Modeling sw

Autodesk Fusion 360 — integrated cloud CAD, CAM, CAE, and PCB software

Slicing sw

PrusaSlicer

Member Showcase

"Benchy"
3D Printing
benchmark test
3D Printed camera slider

3D printed
camera slider
by Trevor Banks
3D Printed camera slider

camera slider closeup
3D Printed Lion
Tesla bust
8 inch tall
Toilet paper holder

Toilet paper holder
InMoov robot

Open-source
InMoov robot
by Kelly C.
Open-source
prosthetic/robotic hand
Tima Anankitpaiboon
Open-source
prosthetic/robotic hands
Tima Anankitpaiboon

Template:Showcase blurb

Curated Links

Links to external sites:

PRUSA KNOWLEDGE BASE

Prusa 3D by Josef Prusa — YouTube channel

Ultimate 3D Printing Materials Guide — SIMPLYFY3D

Other Fun Stuff