Difference between revisions of "Wood Shop"

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
 
(609 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
[[File:Lvl2.png|alt=Level 2 icon|left|50x50px|frameless]]
+
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]
−
'''The Wood Shop Area at Pikes Peak Makerspace consists mostly of Level 2 equipment'''.
 
  
−
Additional training is required to use our Level 2 equipment.
+
'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''
  
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;Wood Shop Area&nbsp;</span> hand tools should be marked with <span style="color:#42B649">'''green'''</span> tape or paint.
+
'''both Level&nbsp;2&nbsp;and Level 3 equipment.'''
  
−
{{Template:Safety}}
+
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
−
==Classes and Training==
 
  
−
===Area Captain(s)===
+
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for&nbsp;all.
−
===Classes===
+
 
−
: Pikes Peak Makerspace announces its  [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+
We are grateful for their commitment and dedication to our community.
−
===Training===
 
−
<gallery>
 
−
File:PPM Band Saw Safety and Operation.pdf|alt=PPM Band Saw Safety and Operation|<center>'''PPM Band Saw<br>Safety and Operation'''</center>
 
−
File:PPM Jointer safety and operation.pdf|alt=PPM Jointer Safety and Operation|<center>'''PPM Jointer<br>Safety and Operation'''</center>
 
−
File:PPM router safety and operation - fixed.pdf|alt=PPM Router Safety and Operation|<center>'''PPM Router<br>Safety and Operation'''</center>
 
−
File:PPM Table Saw safety and operation.pdf|alt=PPM Table Saw Safety and Operation|<center>'''PPM Table Saw<br>Safety and Operation'''</center>
 
−
</gallery>
 
  
−
===For Help===
+
'''Wood Shop Area''' hand tools should be marked with <span style="color:#3DA942">'''green'''</span> tape, paint, or powder&nbsp;coating.
−
: Message in PPM Slack channel #wood-shop
 
  
−
===Tips===
+
The SawStop in the PPM Wood Shop cannot be turned on without scanning the RFID card of a certified member in our T.E.S.L.A.&nbsp;Access&nbsp;system.
−
:Leave the space better than you found it.
+
<br>
 +
<br>
 +
{{Template:Contact Us}}
  
−
:Let the tool do the work. Don't force it.
+
<p style="padding:0.2em 0.4em;  background:#3DA942; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 
<br>
 
<br>
−
{{Template:Historical}}
+
===Wood Shop Policy, Safety, and Orientation===
−
*[[Introduction to Woodworking‏‎]] (14:45, 15 November 2015)
+
All Wood Shop users are required to follow all Wood Shop Policies and Safety&nbsp;Procedures.   
−
*[[Table saw‏‎]] (08:08, 25 November 2015)
 
−
*[[Woodworking terminology‏‎]]
 
  
 +
'''Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.''' 
 +
 +
'''Emergency Safety''' - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of&nbsp;emergency.
 +
 +
*By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your&nbsp;responsibility.
 +
*Damage to tools, equipment, the shop itself caused by your actions is solely your&nbsp;responsibility.
 +
 +
'''Impairment''' - The use of the Wood Shop equipment requires you to be alert, attentive and&nbsp;focused.
 +
 +
*Do not use the Wood Shop, any PPM work area, or any PPM tools, if you are under the influence of drugs or&nbsp;alcohol.
 +
*Likewise, ensure that you are well-rested and&nbsp;alert.
 +
 +
====Personal Protective Equipment (PPE)====
 +
 +
*'''Safety Glasses''' - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop. 
 +
**'''Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools.''' (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most&nbsp;prescription glasses are not impact resistant or provide side protection. If&nbsp;you use prescription glasses, then put an ANSI Z87-1 goggle over them.
 +
*'''Hearing Protection''' - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood Shop. There are two types of hearing&nbsp;protection
 +
**Soft Foam earplugs are available. To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good&nbsp;seal.
 +
**Ear muffs are available. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
 +
*'''Respiratory Protection''' - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust&nbsp;collector).
 +
*'''Shoes''' - Closed toe shoes are required. If&nbsp;working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if materials or tools are&nbsp;dropped.
 +
*'''Gloves''' - Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating&nbsp;machinery.
 +
*'''Hair and Clothing''' - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is&nbsp;secured.
 +
*'''Jewelry''' - Remove rings, bracelets and any other jewelry that could get caught when operating&nbsp;equipment.
 +
 +
====Hazards====
 +
'''The following are a list of hazards that should be considered while working in the Wood Shop.'''
 +
*'''Wood Dust''' - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
 +
*'''Noise''' - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise&nbsp;levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
 +
*'''Electrical Hazards''' - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
 +
*'''Machine Maintenance''' - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
 +
*'''Fire and Explosion''' - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, and sawdust, (and also paints, oils finishes, solvents, and other flammable liquids). Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.
 +
 +
*Electrical panels must be kept clear.
 +
*Fire extinguishers and exit routes must always be accessible.
 +
* It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of equipment.
 +
 +
====Reporting Issues====
 +
 +
=====Injuries=====
 +
'''If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment.'''
 +
 +
'''Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:'''
 +
*Call 719-445-MAKE(6253) and leave a detailed message including:
 +
&nbsp;&nbsp;&nbsp;☐ Your name and phone number
 +
 +
&nbsp;&nbsp;&nbsp;☐ Who was injured and their phone number
 +
 +
&nbsp;&nbsp;&nbsp;☐ Describe the injury, part of body
 +
 +
&nbsp;&nbsp;&nbsp;☐ Detail what type of medical attention was sought
 +
 +
&nbsp;&nbsp;&nbsp;☐ Describe how the accident occurred
 +
 +
&nbsp;&nbsp;&nbsp;☐ Include the equipment that was being used
 +
 +
*Send a direct message to our Executive Director on Slack
 +
*Use the form on the PPM website to [https://pikespeakmakerspace.org/Contact '''Contact Us''']
 +
**Include all the same information listed in the checklist above
 +
 +
'''Equipment Issues'''
 +
 +
'''Red-Tag Equipment''' – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tags-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the&nbsp;equipment.
 +
 +
=====Red Tags=====
 +
:'''•''' Any damage to tools or broken equipment MUST be reported in a direct message to an Area Deputy or our Director.
 +
:'''•''' Use a '''[[New Member Orientation#Red Tags|Red Tag]]''' to designate the broken equipment.
 +
:'''•''' Additionally, report the issue in our Slack #red-tags-issues channel.
 +
 +
====Equipment Information====
 +
:'''Be knowledgeable about the equipment that you are using.'''
 +
 +
=====Laminated Placards=====
 +
* There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training ("PPM Jointer Safety and Operations", for example)
 +
*More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.
 +
 +
=====Getting Help=====
 +
*Use the #wood-shop channel on Slack to get help with specific equipment.
 +
*Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.
 +
 +
====Dust Collection and Air Handler====
 +
'''Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.'''
 +
*'''Fine particulate matter''' is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
 +
*'''Fire Danger''' – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, and electrical boxes. Dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housings, and other sources.
 +
*'''Annoyance''' – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean&nbsp;environments.
 +
 +
====Reclaimed Materials Usage====
 +
=====Use Metal Detector=====
 +
Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.
 +
 +
=====Upcycled Wood=====
 +
Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.
 +
 +
'''Here are some resources about reclaimed wood:'''
 +
 +
'''https://earth911.com/health/how-to-safely-use-pallet-wood/'''
 +
 +
'''https://rockinwoodusa.com/is-reclaimed-wood-safe/'''
 +
 +
Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.
 +
 +
====Banned Materials====
 +
'''These materials are not compatible''' with the blades and bits in the Wood Shop: 
 +
*Plastics
 +
*Metals
 +
*Composite decking material ("Trex", for example)
 +
The equipment in the Wood Shop is configured with blades and bits for working with the following materials: 
 +
 +
*Solid wood
 +
*Plywood
 +
*MDF (Medium Density Fiberboard)
 +
*Upcycled/recycled wood (see caution on use above)
 +
 +
===== Paint or Solvents=====
 +
Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is&nbsp;bothersome.
 +
 +
*Use the ventilated room, outdoors, or other location for applying paints or solvent-based finishes.
 +
 +
====Check-in/ Check-out form====
 +
'''All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.'''
 +
 +
====Project Storage====
 +
Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to&nbsp;removal.
 +
 +
'''All projects left in the woodshop must be labeled with green Project Storage tags.'''
 +
 +
====Clean-up====
 +
If you do not have time to clean up, you do not have time to build it.
 +
 +
'''Woodworking projects tend to have 3 parts:'''
 +
:'''“Plan it. Build it. Clean up after it.”'''
 +
 +
☐ Clean up the area and equipment that you used.
 +
 +
☐ All equipment should be ready for the next member to use right away.
 +
 +
☐ Return all hand tools to their proper location after use. If you don't know where it goes, ask an Area Deputy. This rule applies to all areas of our&nbsp;Makerspace.
 +
 +
☐ Go to the '''Cleaning Sequence''' sheets hanging on the Wood Shop door:
 +
 +
=====Cleaning Sequence (Required)=====
 +
To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip&nbsp;chart.
 +
 +
If you have comments about the cleaning sequence, leave a note on the Check-out form.
 +
 +
==Classes==
 +
:'''Woodshop Orientation & SawStop Certification:'''
 +
::A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
 +
::Sign up for upcoming classes on Meetup! [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
 +
 +
==Training==
 +
:If you need help with a tool or technique, use the #wood-shop channel on&nbsp;Slack.
 +
 +
:'''[https://powermatic.com/manuals POWERMATIC MANUALS]'''
 +
:'''[[Woodworking terminology]]'''
 +
:[[Introduction to Woodworking‏‎|'''Introduction to Woodworking‏‎''']] (15 November 2015)
 +
 +
==Tips==
 +
'''Links to external sites:'''
 +
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 +
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking Our wood working-related books]''' — on LibraryThing.com
  
 
==Equipment Lists==
 
==Equipment Lists==
−
{| class="wikitable sortable"
+
 
−
|+
+
===POWERMATIC Equipment List===
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;POWERMATIC Equipment List&nbsp;&nbsp;</span>
+
{| class="wikitable"
−
!'''Picture'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
−
!'''Item'''
+
| style="vertical-align:middle;" |Picture
−
!'''Manufacturer'''
+
|Item
−
!'''Model<br>Number'''
+
|Manufacturer
−
!'''Estimated<br>Value'''
+
| Model Number
−
!'''Manual'''
+
|Power<br>Requirements
−
!'''Owner'''
+
|Resources
−
!'''Status'''
+
|Training<br>Video Link
−
!'''Problem<br>Description'''
 
 
|-
 
|-
−
|[[File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|center|frameless]]
+
|[[File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|center|frameless|150x150px]]
−
|'''lathe,18" extension, swing away tail stock, ONEWAY bowl chuck'''
+
|<br>'''Woodturning Lathe,'''
−
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|150x150px]]
+
'''18" extension, swing away tail stock,<br>ONEWAY bowl chuck'''<br>
−
|3520B
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]<br>
−
|<p style="text-align:right;">$7,000</p>
+
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
−
|[http://content.powermatic.com/assets/whitepapers/1352001_WP_EN.pdf POWERMATIC whitepaper]
+
|POWERMATIC 3520B
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by&nbsp;<br>Jim&nbsp;Kueck)]
+
|Single Phase,
−
|Up and Operational
+
220V,&nbsp;60Hz,&nbsp;6.2A
 +
|[https://s3.amazonaws.com/jpw-assets/1/b/8/2/1b82ad72ffa4bfbe3be47b5c32268210eaf6b0b9_1352001_man_en.pdf '''Operating Instructions and Parts Manual''']
 
|
 
|
 
|-
 
|-
−
|[[File:POWERMATIC bandsaw big.jpg|alt=POWERMATIC bandsaw|center|frameless|POWERMATIC bandsaw]]
+
|[[File:POWERMATIC bandsaw big.jpg|alt=PWBS-14 POWERMATIC bandsaw|center|frameless|150x150px]]
−
|'''14" bandsaw, rip and cross-cut fences, 5" riser'''
+
|'''14" Woodworking Band Saw,'''
−
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|150x150px]]
+
'''rip and cross-cut fences, <br>5"&nbsp;riser'''<br>
−
|PWBS-14
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
−
|<p style="text-align:right;">$900</p>
+
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
 +
|POWERMATIC PWBS&#8209;14
 +
|Single Phase,
 +
115V, 60Hz, 11A
 +
|'''[https://s3.amazonaws.com/jpw-assets/7/5/7/b/757bf184f70226a8e2aa6c502c51c213b78ecac4_1791216k_man_en.pdf Operating Instructions and Parts Manual]'''
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by&nbsp;<br>Jim&nbsp;Kueck)]
+
|-
−
|Up and Operational
+
|[[File:POWERMATIC planer.jpg|alt=15HH POWERMATIC planer|center|frameless|150x150px]]
 +
 
 +
|'''15-inch Planer,'''
 +
'''4"&nbsp;Dust&nbsp;Port'''<br>
 +
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
 +
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
 +
|POWERMATIC 15HH
 +
|Single Phase,
 +
230V, 60Hz, 15A
 +
|'''[https://s3.amazonaws.com/jpw-assets/e/5/6/7/e5672c0ae446a5b84cf56a662cc41763b8c40945_1791213_man_en.pdf Operating Instructions and Parts Manual]'''
 
|
 
|
 
|-
 
|-
−
|[[File:POWERMATIC table saw.jpg|alt=POWERMATIC table saw|center|frameless|POWERMATIC table saw]]
 
−
|'''table saw, 3-phase, 2 hp, 48" Beisemeyer fence, EXAKTOR cross-cut slide'''
 
−
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|150x150px]]
 
−
|PM66
 
−
|<p style="text-align:right;">$1,500</p>
 
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated by&nbsp;<br>Jim&nbsp;Kueck)]
 
−
|Up and Operational
 
−
|
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
−
 
−
{| class="wikitable sortable"
 
−
|+
 
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;Sharpening and Sanding Equipment List&nbsp;&nbsp;</span>
 
−
!'''Picture'''
 
−
!'''Item'''
 
−
!'''Manufacturer'''
 
−
!'''Model<br>Number'''
 
−
!'''Estimated<br>Value'''
 
−
!'''Manual'''
 
−
!'''Owner'''
 
−
!'''Status'''
 
−
!'''Problem<br>Description'''
 
−
|-
 
−
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|200x200px]]
 
−
|'''8" bench grinder on pedestal, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds'''
 
−
|[https://www.jettools.com/us/en/c/woodworking/cat_jet_jet_woodworking JET]
 
−
|[https://www.jettools.com/us/en/p/jwbg-8nw-8-ww-bench-grinder-without-wheels/726101 JWBG-8]
 
−
|<p style="text-align:right;">$500</p>
 
−
|[[File:Wolverine Dressing Jig Instructions.pdf|alt=Wolverine Dressing Jig Instructions|center|frameless|129x129px]]
 
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
 
−
|Up and Operational
 
 
|
 
|
−
|-
 
 
|
 
|
−
|'''precision ground granite block, 2"x18"x3"'''
 
 
|
 
|
 
|
 
|
−
|<p style="text-align:right;">$200</p>
 
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
 
−
|Up and Operational
 
 
|
 
|
 
|-
 
|-
 
|
 
|
−
|'''variable speed buffer and buffing wheels'''
+
|'''6" Belt/<br>12" Disc<br>Combination Sander'''<br>
−
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
−
| DWP849
+
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
−
|<p style="text-align:right;">$200</p>
+
|POWERMATIC 30B
 +
|3-phase
 +
|[https://www.ereplacementparts.com/powermatic-30b-combination-belt-and-disc-sander-parts-c-32549_32557_289690.html '''Replacement Parts''']
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
−
|Up and Operational
+
| style="vertical-align:middle;" |
−
|
 
−
|-
 
 
|
 
|
−
|'''sanding belts, disks and sheets'''
 
−
|[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]]
 
 
|
 
|
−
|<p style="text-align:right;">$100</p>
 
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
 
−
|Up and Operational
 
 
|
 
|
−
|-
 
−
|[[File:3M hot melt glue gun.jpg|center|frameless|133x133px]]
 
−
|'''glue gun, Hot Melt, 250 watts'''
 
−
|[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]]
 
−
|[https://multimedia.3m.com/mws/media/277207O/scotch-weldtm-applicator-ae-ii.pdf Scotch-Weld™ Applicator AE II]
 
−
|<p style="text-align:right;">$100</p>
 
 
|
 
|
−
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
 
−
|Up and Operational
 
 
|
 
|
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
 
|}
 
|}
 +
<gallery widths="200" heights="125">
 +
File:Lathe chuck.jpg|alt=Lathe chuck|'''Lathe chuck'''
 +
File:Lathe tools.jpg|alt=Lathe tools|'''Lathe tools'''
 +
</gallery>
  
−
'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''
+
===Sharpening and Sanding Equipment List===
−
{| class="wikitable sortable"
+
{| class="wikitable"
−
|+
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;Wood Shop Equipment List&nbsp;&nbsp;</span>
+
| style="vertical-align:middle;" |Picture
−
!'''Picture'''
+
|Item
−
!'''Item'''
+
|Manufacturer
−
!'''Manufacturer'''
+
|Model&nbsp;Number
−
!'''Model<br>Number'''
+
|Resources
−
!'''Estimated<br>Value'''
 
−
!'''Manual'''
 
−
!'''Owner'''
 
−
!'''Status'''
 
−
!'''Problem<br>Description'''
 
 
|-
 
|-
−
|[[File:JET Jointer.jpg|alt=JET Jointer|center|frameless|JET Jointer]]
+
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]]
−
|'''8" Jointer'''
+
|'''8" bench grinder, blue&nbsp;and&nbsp;white grinding stones,<br>Wolverine and Veritas sharpening devices,<br>buffing wheel and&nbsp;compounds'''
−
|[https://www.jettools.com/us/en/c/woodworking/cat_jet_jet_woodworking JET]
+
|[https://jettools.com/woodworking/ JET]
−
| JJ-8CS
+
|JET
−
|<p style="text-align:right;">$1,000</p>
+
JWBG&#8209;8&nbsp;
−
|
+
|[[File:Wolverine Dressing Jig Instructions.pdf|alt=Wolverine Dressing Jig Instructions|center|frameless|129x129px]]
−
| PPM
 
−
|Under repair
 
−
| installing new
 
−
helical head
 
 
|-
 
|-
 
|
 
|
−
|'''Floor drill press'''
+
|'''variable speed buffer<br>and buffing wheels'''
−
|[https://www.portercable.com/products/power-tools/woodworking-tools PORTER-CABLE]
+
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
 +
|DeWALT
 +
DWP849
 
|
 
|
−
|<p style="text-align:right;">$500</p>
+
|-
−
|
 
−
|PPM
 
 
|
 
|
 +
|'''sanding&nbsp;belts, disks and sheets'''
 +
|[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]]
 +
|3M
 +
 
|
 
|
 
|-
 
|-
 
|
 
|
−
|'''10" benchtop bandsaw'''
 
−
|[https://deltamachinery.com/products/ DELTA]
 
 
|
 
|
−
|<p style="text-align:right;">$100</p>
 
 
|
 
|
−
|PPM
 
 
|
 
|
 
|
 
|
 
|-
 
|-
 +
|[[File:Granite block.jpg|alt=Granite block|center|frameless|133x133px]]
 +
|'''precision ground granite block, 12"x18"x3"'''
 
|
 
|
−
|'''6" Disk 4" Belt Sander'''
 
−
|[https://wenproducts.com/collections/power-tools WEN]
 
−
|[https://wenproducts.com/products/wen-6502t-4-3-amp-4-x-36-in-belt-and-6-in-disc-sander 6502T]
 
−
|<p style="text-align:right;">$120</p>
 
 
|
 
|
−
|PPM
 
 
|
 
|
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 
|
 
|
−
|-
 
 
|
 
|
−
|'''6" Disk 4" Belt Sander'''
 
−
|Central Machinery
 
−
|97181
 
−
|<p style="text-align:right;">$78</p>
 
 
|
 
|
−
|PPM
 
 
|
 
|
 +
|}
 +
 +
:'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''
 +
 +
===Wood Shop Equipment List===
 +
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
 +
| style="vertical-align:middle;" |Picture
 +
|Item
 +
|Manufacturer
 +
|Model&nbsp;Number
 +
|Power<br>Requirements
 +
|Resources
 +
|-
 +
|[[File:JET Jointer.jpg|alt=JET Jointer|center|frameless|JET Jointer|150x150px]]
 +
|'''8" Jointer with Shelix cutting&nbsp;head'''
 +
|JET
 +
|JJ-8CS
 +
|single phase,
 +
110 Volts,
 +
 +
15 Amps,
 +
 +
60HZ
 +
|[https://jettools.com/woodworking/ JET]
 +
|-
 +
|[[File:Miter saw with new dust hood.jpg|alt=Miter saw with new dust hood|center|frameless|133x133px]]
 +
|'''12" Sliding Compound'''
 +
'''Miter Saw, dust&nbsp;hood & RIGID&nbsp;vacuum'''
 +
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
 +
|DeWALT DW708
 +
|single phase,
 +
110 Volts,
 +
 +
13 Amps,
 +
 +
60HZ
 
|
 
|
 
|-
 
|-
 +
|[[File:WORK SHARP sharpener.jpg|alt=WORK SHARP sharpener|center|frameless|150x150px]]
 +
|'''wood tool sharpener'''
 +
|WORK SHARP
 +
|WS3000
 +
|single phase,
 +
110 Volts,
 +
 +
2 Amps,
 +
 +
60HZ
 
|
 
|
−
|'''Free standing dust collector & vacuum'''
+
|-
−
|Dust Deputy & [https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsmen]
+
|[[File:DELTA Router Table.jpg|alt=DELTA Router Table|center|frameless|150x150px]]
 +
|'''Router and Shaper with bits on&nbsp;rolling&nbsp;carts'''
 +
|DELTA
 
|
 
|
−
|<p style="text-align:right;">$150</p>
+
|single phase,
 +
110 Volts,
 +
 
 +
9 Amps,
 +
 
 +
60HZ
 
|
 
|
−
|PPM
+
|-
 
|
 
|
 +
|'''Floor drill press'''
 +
|PORTER-CABLE
 
|
 
|
 +
|single phase,
 +
110 Volts,
 +
 +
8 Amps,
 +
 +
60HZ
 +
|[https://www.portercable.com/solutions/woodworking-tools PORTER-CABLE]
 
|-
 
|-
 
|
 
|
−
|'''Dust Collector 1.5HP 6" inlet'''
+
|'''6" Disk 4" Belt Sander'''
−
|[https://deltamachinery.com/products/ DELTA]
+
|WEN
 +
|6502T
 +
|single phase,
 +
110 Volts,
 +
 
 +
4.3 Amps,
 +
 
 +
60HZ
 +
|[https://wenproducts.com/collections/power-tools WEN]
 +
 
 +
[https://wenproducts.com/products/wen-6502t-4-3-amp-4-x-36-in-belt-and-6-in-disc-sander 6502T]
 +
|-
 
|
 
|
−
|<p style="text-align:right;">$550</p>
+
|'''1" x 30" belt & 5"&nbsp;disk&nbsp;sander'''
 +
|Dremel
 
|
 
|
−
|PPM
+
|single phase,
 +
110 Volts,
 +
 
 +
3 Amps,
 +
 
 +
60HZ
 
|
 
|
 +
|-
 
|
 
|
−
|-
 
 
|
 
|
−
|'''1" x 30" belt & 5"&nbsp;disk&nbsp;sander'''
 
−
|Dremel
 
 
|
 
|
−
|<p style="text-align:right;">$75</p>
 
 
|
 
|
−
|PPM
 
 
|
 
|
 
|
 
|
 
|-
 
|-
 +
|[[File:BAYLEIGH AIR FILTRATION.jpg|alt=BAYLEIGH AIR FILTRATION SYSTEM|center|frameless|150x150px]]
 +
|'''AIR FILTRATION SYSTEM'''
 +
'''with remote'''
 +
|BAILEIGH
 +
|AFS-2400
 +
|single phase,
 +
110 Volts,
 +
 +
14 Amps,
 +
 +
60HZ
 +
|[https://www.baileigh.com/ BAILEIGH]
 +
 +
[https://www.baileigh.com/air-filtration-system-afs-2400 AFS-2400]
 +
|-
 +
|[[File:Box fan.jpg|alt=Box fan|center|frameless|140x140px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Box_fan.jpg]]
 +
|'''Box fan,'''
 +
'''20", 3-speed'''
 +
|LASKO
 
|
 
|
−
|'''Free standing 6"x84" Horizontal Belt Sander'''
 
−
|[https://www.jettools.com/us/en/c/woodworking/cat_jet_jet_woodworking JET]
 
−
|
 
−
|<p style="text-align:right;">$800</p>
 
−
|
 
−
|PPM
 
 
|
 
|
 
|
 
|
 
|-
 
|-
 
|
 
|
−
|'''12" Sliding Compound'''  
+
|'''Dust Collector<br>1.5HP 6" inlet'''
−
'''Miter Saw'''
+
|DELTA
−
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
 
−
|DW708
 
−
|<p style="text-align:right;">$350</p>
 
 
|
 
|
−
|'''Les'''
 
 
|
 
|
 +
|[https://deltamachinery.com/products/ DELTA]
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 
|
 
|
−
|-
 
 
|
 
|
−
|'''Large scroll saw'''
 
 
|
 
|
 
|
 
|
−
|<p style="text-align:right;">$150</p>
 
 
|
 
|
−
| PPM
 
−
|Needs parts and rebuilt
 
−
|Missing motor
 
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
 
|}
 
|}
  
−
<gallery>
+
<gallery widths="200" heights="125">
−
File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|<center>'''3520B POWERMATIC lathe'''</center>
+
File:Cable management.jpg|alt=Wood Shop Cable Management|'''Cable Management<br><i>by Nick Hopkins<br>(11/06/22)</i>'''
−
File:Lathe chuck.jpg|alt=Lathe chuck|<center>'''Lathe chuck'''</center>
+
File:AFS-2400 nameplate.jpg|alt=AFS-2400 nameplate|'''AFS-2400 nameplate'''
−
File:Lathe tools.jpg|alt=Lathe tools|<center>'''Lathe tools'''</center>
+
File:Bench grinder.jpg|alt=Bench grinder|'''Bench grinder'''
−
File:Bench grinder.jpg|alt=Bench grinder|<center>'''Bench grinder'''</center>
+
File:JET Jointer nameplate.jpg|alt=JET Jointer nameplate|'''JET Jointer nameplate'''    
−
File:POWERMATIC bandsaw big.jpg|alt=POWERMATIC bandsaw|<center>'''POWERMATIC bandsaw'''</center>
 
−
File:POWERMATIC bandsaw.jpg|alt=POWERMATIC bandsaw|<center>'''POWERMATIC bandsaw'''</center>
 
−
File:POWERMATIC table saw.jpg|alt= POWERMATIC table saw|<center>'''POWERMATIC table saw'''</center>
 
−
File:PM 66.jpg|alt=PM 66|<center>'''PM 66'''</center>
 
−
File:Powermatic 66 Inspection tag.jpg|alt= Powermatic 66 Inspection tag|<center>'''Powermatic 66 Inspection tag'''</center>
 
−
File:JET Jointer nameplate.jpg|alt=JET Jointer nameplate|<center>'''JET Jointer<br>nameplate'''</center>
 
−
File:JET Jointer.jpg|alt=JET Jointer|<center>'''JET Jointer'''</center>
 
 
</gallery>
 
</gallery>
−
{| class="wikitable sortable"
+
 
−
|+
+
 
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;FESTOOL Equipment List -- Level 3 Tools&nbsp;&nbsp;</span>
+
===FESTOOL Equipment List — Level 3 Tools===
−
!'''Picture'''
+
{| class="wikitable"
−
!'''Item'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
−
!'''Manufacturer'''
+
| style="vertical-align:middle;" |Picture
−
!'''Model<br>Number'''
+
|Item
−
!'''Estimated<br>Value'''
+
|Manufacturer
−
!'''Manual'''
+
|Model<br>Number
−
!'''Owner'''
+
|Resources
−
!'''Status'''
+
|Owner
−
!'''Problem<br>Description'''
 
 
|-
 
|-
−
|[[File:Festool Track Saw.jpeg|alt=Festool Track Saw|center|frameless]]
+
|[[File:Festool Track Saw.jpeg|alt=Festool Track Saw|center|frameless|150x150px]]
−
|'''Track Saw,'''
+
|'''Track Saw'''<br>
−
Level 3 Tool
+
[[File:Level 3 badge.png|left|frameless|55x55px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
−
|TS 55 EQ
+
|FESTOOL
−
|<p style="text-align:right;">$550</p>
+
TS 55 EQ
 
|
 
|
 
|'''John Norton'''
 
|'''John Norton'''
−
|Working
 
−
|
 
 
|-
 
|-
−
|[[File:Festool Half Sheet Sander.jpeg|alt=Festool Half Sheet Sander|center|frameless]]
+
|[[File:Festool Half Sheet Sander.jpeg|alt=Festool Half Sheet Sander|center|frameless|150x150px]]
−
|'''Sander&nbsp;(Half&nbsp;Sheet),'''  
+
|'''Sander&nbsp;(Half&nbsp;Sheet)'''<br>
−
Level 3 Tool
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
−
|RS 2-E-Plus
+
|FESTOOL
−
|<p style="text-align:right;">$350</p>
+
RS 2-E-Plus
 
|
 
|
 
|'''John Norton'''
 
|'''John Norton'''
−
|Working
 
−
|
 
 
|-
 
|-
−
|[[File:Festool Orbital Sander.jpeg|alt=Festool Orbital Sander|center|frameless]]
+
|[[File:Festool Orbital Sander.jpeg|alt=Festool Orbital Sander|center|frameless|150x150px]]
−
|'''Sander&nbsp;(Orbital),'''
+
|'''Sander&nbsp;(Orbital)'''<br>
−
Level 3 Tool
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
−
|ETS 150/5 EQ-Plus
+
|FESTOOL
−
|<p style="text-align:right;">$350</p>
+
ETS 150/5 EQ-Plus
 
|
 
|
 
|'''John Norton'''
 
|'''John Norton'''
−
|Working
 
−
|
 
 
|-
 
|-
−
|[[File:Festool Dust Extractor.jpeg|alt=Festool Dust Extractor|center|frameless]]
+
|[[File:Festool Dust Extractor.jpeg|alt=Festool Dust Extractor|center|frameless|150x150px]]
−
|'''Dust Collector,'''
+
|'''Dust Collector'''<br>
−
Level 3 Tool
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
−
|CLEANTEC&nbsp;CT&nbsp;22&nbsp;E
+
|FESTOOL
−
|<p style="text-align:right;">$600</p>
+
CLEANTEC&nbsp;CT&nbsp;22&nbsp;E
 
|
 
|
 
|'''John Norton'''
 
|'''John Norton'''
−
|Working
 
−
|
 
 
|-
 
|-
 
|
 
|
−
|'''Multifunction Table,'''  
+
|'''<br>Multifunction Table'''<br>
−
Level 3 Tool
+
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
 
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
−
|1080
+
|FESTOOL
−
|<p style="text-align:right;">$760</p>
+
1080
 
|
 
|
 
|'''John Norton'''
 
|'''John Norton'''
−
|Working
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 +
|
 +
|
 +
|
 +
|
 
|
 
|
−
|-
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Manual'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
 
|}
 
|}
−
<gallery>
+
 
−
File:Festool Track Saw in Systainer.jpeg|alt=Festool Track Saw in Systainer|<center><b>Festool<br>Track Saw,</b><br>in Systainer</center>
+
<gallery widths="200" heights="125">
−
File:Festool Orbital Sander in Systainer.jpeg|alt= Festool Orbital Sander in Systainer|<center><b>Festool<br>Orbital Sander,</b><br>in Systainer</center>
+
File:Festool Track Saw in Systainer.jpeg|alt=Festool Track Saw in Systainer|'''FESTOOL Track Saw,<br>in Systainer'''
−
File:Festool Half Sheet Sander in Systainer.jpeg|alt=Festool Half Sheet Sander in Systainer|<center><b>Festool<br>Half Sheet Sander,</b><br>in Systainer</center>
+
File:Festool Orbital Sander in Systainer.jpeg|alt=Festool Orbital Sander in Systainer|'''FESTOOL Orbital Sander,<br>in Systainer'''
 +
File:Festool Half Sheet Sander in Systainer.jpeg|alt=Festool Half Sheet Sander in Systainer|'''FESTOOL Half Sheet Sander,<br>in Systainer'''
 
</gallery>
 
</gallery>
−
{| class="wikitable sortable"
+
 
−
|+
+
=== Power Tools===
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;Clamps&nbsp;&nbsp;</span>
+
'''<nowiki/>'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly'''
−
!'''Item'''
+
{| class="wikitable"
−
!'''Manufacturer'''
+
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
−
!
+
| style="vertical-align:middle;" |Picture
−
!'''Quantity'''
+
|Item
−
!'''Price<br>Each'''
+
|Manufacturer
−
!'''Owner'''
+
|Model<br>Number
−
!'''Status'''
+
|Resources
−
!'''Problem<br>Description'''
+
|-
 +
|[[File:Compact Router.jpg|alt=Milwaukee Compact Router|center|frameless|120x120px]]
 +
|'''COMPACT ROUTER'''  
 +
'''M18 FUEL'''
 +
|Milwaukee
 +
|2723-20
 +
|[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2723-20 2723-20]
 +
[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
 +
|-
 +
|[[File:JIG SAW Milwaukee.jpg|alt=JIG SAW Milwaukee|center|frameless|130x130px]]
 +
|'''JIG SAW'''
 +
'''M18 FUEL'''  
 +
 
 +
'''D-Handle'''
 +
|Milwaukee
 +
|2737-20
 +
|[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2737-20 2737-20]
 +
[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
 +
|-
 +
|[[File:Makita Circular Saw.jpg|alt=Makita Circular Saw|center|frameless|120x120px]]
 +
|'''Circular Saw,'''  
 +
'''185mm'''
 +
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
 +
|Makita
 +
5007NB
 +
|[https://www.makitatools.com/products/details/5007NB 5007NB]
 +
[https://www.makitatools.com/products/details/5007NB product detail on makita.com]
 +
|-
 +
|[[File:Makita Router 3601B.jpg|alt=Makita Router 3601B|center|frameless|120x120px]]
 +
|'''Router'''
 +
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
 +
|Makita
 +
3601B
 +
 
 +
|[https://www.makita.com.sg/wp-content/uploads/2020/08/3601B_Manual.pdf INSTRUCTION MANUAL]
 
|-
 
|-
−
|'''36" Quick Clamp'''
+
|[[File:DeWALT sawsall.jpg|alt=DeWALT sawsall|center|frameless|120x120px]]
−
|[https://www.irwin.com/tools/trades/woodworker Irwin]
+
|'''RECIPROCATING SAW'''
−
|Quick Grip
+
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
−
|<p style="text-align:center;">2</p>
+
|DeWALT
−
|<p style="text-align:right;">$36</p>
+
DW304P
−
|'''Bill Epperson'''
 
 
|
 
|
 +
|-
 +
|[[File:DeWALT jigsaw.jpg|alt=DeWALT jigsaw|center|frameless|120x120px]]
 +
|'''JIG SAW'''
 +
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
 +
|DeWALT
 +
DW331
 
|
 
|
 
|-
 
|-
−
|'''8" Quick Clamp'''
+
|[[File:BOSCH jigsaw 1590EVS.jpg|alt=BOSCH jigsaw 1590EVS|center|frameless|120x120px]]
−
|[https://www.irwin.com/tools/trades/woodworker Irwin]
+
|'''Jig Saw'''
−
|Quick Grip
+
|BOSCH
−
|<p style="text-align:center;">2</p>
+
|1590EVS
−
|<p style="text-align:right;">$10</p>
 
−
|PPM
 
 
|
 
|
 +
|-
 +
|[[File:AIR NAILER.jpg|alt=AIR NAILER|center|frameless|104x104px|AIR NAILER]]
 +
|'''AIR NAILER/'''
 +
'''STAPLER'''
 +
|CENTRAL PNEUMATIC
 +
|64269
 +
|[https://www.harborfreight.com/18-gauge-2-in-1-air-nailerstapler-68019.html 64269]
 +
|-
 +
|[[File:Biscuit Joiner In Red Case.jpg|alt=Biscuit Joiner In Red Case|center|frameless|150x150px]]
 +
|'''Biscuit'''
 +
'''Joiner'''
 +
|Craftsman
 
|
 
|
 +
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
 
|-
 
|-
−
|'''12" Quick Clamp'''
 
−
|[https://www.irwin.com/tools/trades/woodworker Irwin]
 
−
|Quick Grip
 
−
|<p style="text-align:center;">2</p>
 
−
|<p style="text-align:right;">$12</p>
 
−
|PPM
 
 
|
 
|
 +
|'''Circular'''
 +
'''Saw'''
 +
|Craftsman
 
|
 
|
 +
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
 
|-
 
|-
−
|'''30" Bessey Pipe Bar Clamp'''
 
−
|[https://www.besseytools.com/en-US/BESSEY-Tools-North-America/Products/Accessories---Spare-Parts/Bar-clamps Bessey]
 
−
|
 
−
|<p style="text-align:center;">4</p>
 
−
|<p style="text-align:right;">$20</p>
 
−
|'''Bill Epperson'''
 
 
|
 
|
 +
|'''Belt Sander'''
 +
'''(handheld)'''
 +
|Craftsman
 
|
 
|
 +
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
 
|-
 
|-
−
|'''48" Bessey Pipe Bar Clamp'''
 
−
|[https://www.besseytools.com/en-US/BESSEY-Tools-North-America/Products/Accessories---Spare-Parts/Bar-clamps Bessey]
 
 
|
 
|
−
|<p style="text-align:center;">2</p>
+
|'''Belt Sander'''
−
|<p style="text-align:right;">$20</p>
+
'''(handheld)'''
−
|'''Bill Epperson'''
+
|[[File:Logo RYOBI.png|alt=Logo RYOBI|left|frameless|65x65px]]
 +
|RYOBI
 
|
 
|
 +
|-
 +
|[[File:Sander PORTER-CABLE.jpg|alt=Sander PORTER-CABLE|center|frameless|133x133px]]
 +
|'''Orbital Sander'''
 +
|PORTER-CABLE
 +
|Quicksand
 
|
 
|
 
|-
 
|-
−
|'''60" Bessey Pipe Bar Clamp'''
+
|[[File:Sander Mouse.jpg|alt=Sander Mouse|center|frameless|133x133px]]
−
|[https://www.besseytools.com/en-US/BESSEY-Tools-North-America/Products/Accessories---Spare-Parts/Bar-clamps Bessey]
 
 
|
 
|
−
|<p style="text-align:center;">2</p>
+
'''Mouse Sander/Polisher'''
−
|<p style="text-align:right;">$20</p>
+
|[[File:Logo BLACK&DECKER.png|left|frameless]]
−
|'''Bill Epperson'''
+
|BLACK&DECKER
 +
FMS50
 
|
 
|
 +
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 
|
 
|
−
|-
 
−
|'''6" Quick Release Bar Clamp'''
 
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
 
 
|
 
|
−
|<p style="text-align:center;">2</p>
 
−
|<p style="text-align:right;">$3</p>
 
−
|'''Bill Epperson'''
 
 
|
 
|
 
|
 
|
 +
|}
 +
 +
===Clamps===
 +
{| class="wikitable sortable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
 +
| style="vertical-align:middle;" |Item
 +
|Manufacturer
 +
|Model
 +
|Quantity
 +
|Owner
 
|-
 
|-
−
|'''12" Quick Release Bar Clamp'''
+
|'''6" Wooden Handscrew Clamps'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
+
|ROCKLER
−
|
+
|[https://www.rockler.com/wooden-handscrew-clamps-clamps Wooden Handscrew Clamps]
−
|<p style="text-align:center;">0</p>
+
|<p style="text-align:left;">2</p>
−
|
 
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''18" Quick Release Bar Clamp'''
+
|'''8" Quick Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
+
|Irwin
−
|
+
|[https://www.irwintools.com/products/hand-tools Irwin]
−
|<p style="text-align:center;">0</p>
+
Quick Grip
−
|
+
|<p style="text-align:left;">2</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''24" Quick Release Bar Clamp'''
+
|'''12" Quick Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
+
|Irwin
−
|
+
|[https://www.irwintools.com/products/hand-tools Irwin]
−
|<p style="text-align:center;">2</p>
+
Quick Grip
−
|<p style="text-align:right;">$6</p>
+
|<p style="text-align:left;">2</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''30" Quick Release Bar Clamp'''
+
|'''36" Quick Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
+
|Irwin
−
|
+
|[https://www.irwintools.com/products/hand-tools Irwin]
−
|<p style="text-align:center;">0</p>
+
Quick Grip
−
|
+
|<p style="text-align:left;">1</p>
 +
|'''Bill Epperson'''
 +
|-
 +
|'''30" Pipe Bar Clamp'''
 +
|Bessey
 +
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
 +
|<p style="text-align:left;">4</p>
 +
|'''Bill Epperson'''
 +
|-
 +
|'''48" Pipe Bar Clamp'''
 +
|Bessey
 +
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
 +
|<p style="text-align:left;">2</p>
 +
|'''Bill Epperson'''
 +
|-
 +
|'''60" Pipe Bar Clamp'''
 +
|Bessey
 +
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
 +
|<p style="text-align:left;">2</p>
 +
|'''Bill Epperson'''
 +
|-
 +
|'''36" Quick Release Steel Bar Clamp'''
 +
|Jorgensen
 +
|CABINET MASTER 8036
 +
|<p style="text-align:left;">5</p>
 
|PPM
 
|PPM
 +
|-
 +
|'''6" Quick Release Bar Clamp'''
 
|
 
|
 
|
 
|
 +
|<p style="text-align:left;">2</p>
 +
|'''Bill Epperson'''
 
|-
 
|-
−
|'''36" Quick Release Bar Clamp'''
+
|'''12" Quick Release Bar Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
 
 
|
 
|
−
|<p style="text-align:center;">0</p>
 
 
|
 
|
 +
|<p style="text-align:left;">0</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''6" Ratcheting Bar Clamp'''
+
|'''18" Quick Release Bar Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
 
 
|
 
|
−
|<p style="text-align:center;">0</p>
 
 
|
 
|
 +
|<p style="text-align:left;">0</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''12" Ratcheting Bar Clamp'''
+
|'''24" Quick Release Bar Clamp'''
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
 
−
|
 
−
|<p style="text-align:center;">6</p>
 
−
|<p style="text-align:right;">$4</p>
 
−
|PPM
 
−
|
 
−
|
 
−
|-
 
−
|'''24" Ratcheting Bar Clamp'''
 
−
|[https://www.harborfreight.com/search?q=Pittsburg+bar+clamps PITTSBURGH]
 
 
|
 
|
−
|<p style="text-align:center;">0</p>
 
 
|
 
|
 +
|<p style="text-align:left;">2</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|'''Item'''
+
|'''30" Quick Release Bar Clamp'''
−
|'''Manufacturer'''
 
 
|
 
|
−
|'''Quantity'''
 
−
|'''Price<br>Each'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
−
|'''Problem<br>Description'''
 
−
|}
 
−
 
−
=== Hand Tools===
 
−
:<span style="color:#FFFFFF; background:#42B649">&nbsp;Wood Shop Area&nbsp;</span> hand tools should be marked with <span style="color:#42B649">'''green'''</span> tape or paint.
 
−
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
−
{| class="wikitable sortable"
 
−
|+
 
−
<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;Hand Tools&nbsp;&nbsp;</span>
 
−
!'''Picture'''
 
−
!'''Item'''
 
−
!'''Manufacturer'''
 
−
!'''Model<br>Number'''
 
−
!'''Estimated<br>Value'''
 
−
!'''Owner'''
 
−
!'''Status'''
 
−
!'''Problem<br>Description'''
 
−
|-
 
−
|[[File:AIR NAILER.jpg|alt=AIR NAILER|center|frameless|104x104px|AIR NAILER]]
 
−
|'''AIR NAILER/'''
 
−
'''STAPLER'''
 
−
|CENTRAL PNEUMATIC
 
−
|[https://www.harborfreight.com/18-gauge-2-in-1-air-nailerstapler-68019.html 64269]
 
−
|<p style="text-align:right;">$30</p>
 
−
|PPM
 
−
|New, (12/14/21)
 
 
|
 
|
−
|-
+
|<p style="text-align:left;">0</p>
−
|[[File:METAL DETECTOR.jpg|alt=METAL DETECTOR|center|frameless|133x133px]]
 
−
|'''HAND HELD'''
 
−
'''METAL DETECTOR'''
 
−
|EASYVIEW TECHNOLOGY
 
−
|[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
 
−
|<p style="text-align:right;">$20</p>
 
 
|PPM
 
|PPM
−
|Working
 
−
|
 
 
|-
 
|-
 +
|'''36" Quick Release Bar Clamp'''
 
|
 
|
−
|'''Biscuit'''
+
|[https://www.harborfreight.com/36-in-aluminum-bar-clamp-60539.html ITEM 60539]
−
'''Jointer'''
+
|<p style="text-align:left;">6</p>
−
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
+
|PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
−
|
 
−
|<p style="text-align:right;">$130</p>
 
−
|PPM
 
−
|
 
−
|
 
 
|-
 
|-
 +
|'''60" Quick Release Bar Clamp'''
 
|
 
|
−
|'''Jigsaw'''
+
|[https://www.harborfreight.com/60-in-aluminum-f-style-bar-clamp-60673.html ITEM 60673]
−
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
+
|<p style="text-align:left;">2</p>
−
|
 
−
|<p style="text-align:right;">$150</p>
 
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
 +
|'''50" CLAMP & CUT EDGE GUIDE'''
 
|
 
|
−
|'''Jigsaw'''
+
|[https://www.harborfreight.com/50-inch-clamp-and-cut-edge-guide-66581.html ITEM 66581]
−
|
+
|<p style="text-align:left;">1</p>
−
|
 
−
|
 
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
 +
|'''6" Ratcheting Bar Clamp'''
 
|
 
|
−
|'''Sawsall'''
 
−
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
 
 
|
 
|
−
|<p style="text-align:right;">$100</p>
+
|<p style="text-align:left;">0</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
 +
|'''12" Ratcheting Bar Clamp'''
 
|
 
|
−
|'''Circular'''
 
−
'''Saw'''
 
−
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
 
 
|
 
|
−
|<p style="text-align:right;">$50</p>
+
|<p style="text-align:left;">6</p>
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
 +
|'''24" Ratcheting Bar Clamp'''
 
|
 
|
−
|'''Belt Sander (handheld)'''
 
−
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
 
 
|
 
|
−
|<p style="text-align:right;">$50</p>
+
|<p style="text-align:left;">0</p>
 
|PPM
 
|PPM
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 
|
 
|
 
|
 
|
−
|-
 
−
|
 
−
|'''Belt Sander (handheld)'''
 
−
|[[File:Logo RYOBI.png|alt=Logo RYOBI|left|frameless|65x65px]]
 
−
|
 
−
|
 
−
|'''???'''
 
 
|
 
|
 
|
 
|
 +
|}
 +
 +
 +
===Hand Tools===
 +
{| class="wikitable"
 +
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
 +
| style="vertical-align:middle;" |Picture
 +
|Item
 +
|Manufacturer
 +
|Owner
 
|-
 
|-
−
|[[File:Sander PORTER-CABLE.jpg|alt=Sander PORTER-CABLE|center|frameless|133x133px]]
+
|[[File:Wood clamp donation.jpg|alt=Wood clamp donation|center|frameless|160x160px]]
−
|'''Orbital Sander'''
+
|'''Wood Clamps'''
−
| PORTER-CABLE
 
−
|Quicksand
 
 
|
 
|
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|[[File:Sander RYOBI.jpg|alt=Sander RYOBI|center|frameless|133x133px]]
+
|[[File:Ten mill stick.jpg|alt=Ten million dollar stick|center|frameless|150x150px]]
−
|'''Orbital Sander'''
+
|'''10 Million Dollar Stick'''
−
|[[File:Logo RYOBI.png|alt=Logo RYOBI|left|frameless|65x65px]]
 
 
|
 
|
−
|<p style="text-align:right;">$75</p>
 
 
|PPM
 
|PPM
−
|
 
−
|
 
 
|-
 
|-
−
|[[File:Sander Mouse.jpg|alt=Sander Mouse|center|frameless|133x133px]]
+
|[[File:Forstner bit set.jpg|alt=Forstner bit set|center|frameless|150x150px]]
 +
|'''Forstner bit set'''
 +
'''(16 bits)'''
 
|
 
|
−
'''Mouse Sander/Polisher'''
 
−
|[[File:Logo BLACK&DECKER.png|left|frameless]]
 
−
|MS500
 
−
|<p style="text-align:right;">$25</p>
 
 
|PPM
 
|PPM
 +
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 +
| style="vertical-align:middle;" |
 
|
 
|
 
|
 
|
−
|- sty
 
−
|'''Picture'''
 
−
|'''Item'''
 
−
|'''Manufacturer'''
 
−
|'''Model<br>Number'''
 
−
|'''Estimated<br>Value'''
 
−
|'''Owner'''
 
−
|'''Status'''
 
 
|
 
|
 
|}
 
|}
  
−
===[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received Donations Received]===
+
:'''Wood Shop Area''' hand tools should be marked with <span style="color:#3DA942">'''green'''</span> tape or paint or powder coating.
−
===[https://wiki.pikespeakmakerspace.org/index.php/Wish_List#Wood_Shop Wish List]===
+
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
−
 
 
−
==Policies==
 
−
 
 
−
===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
 
−
===Materials===
 
−
:'''Donate for "Sheet Goods" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 
−
:'''Or, leave donations in a black payment box, or use a QR code.'''
 
−
:Help Us Keep Stocked Up!
 
  
 +
==Benefits==
 
{{Member Benefits}}
 
{{Member Benefits}}
  
−
{{Scrap and Trash}}
+
==Donate for Materials and Consumables==
 +
Donated materials are available for member use, but should be compensated for by making a donation through one of the following methods:
 +
:'''Donate via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
 +
:'''Or, leave donations in a black payment box.'''
 +
==Related Pages==
 +
'''Links to related PPM Wiki pages:'''
  
−
==Software==
+
:[[Wood_Shop_--_SawStop|<span style="color:#FFFFFF; background:#3DA942">&nbsp;&nbsp;'''Wood Shop — SawStop'''&nbsp;&nbsp;</span>]]
  
−
===Fusion 360===
+
:[[CNC|<span style="color:#FFFFFF; background:#2B78BE">&nbsp;&nbsp;'''CNC Router Table'''&nbsp;&nbsp;</span>]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''
  
−
===Inkscape===
+
:[[Metal_Shop|<span style="color:#FFFFFF; background:#EB4F9C">&nbsp;&nbsp;'''Metal Shop'''&nbsp;&nbsp;</span>]]
  
−
===VCarve===
+
:[[Vented_Room|<span style="color:#FFFFFF; background:#0F99D7">&nbsp;&nbsp;'''Vented Room'''&nbsp;&nbsp;</span>]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''
  
 +
:[[Shed|<span style="color:#FFFFFF; background:#766FAF">&nbsp;&nbsp;'''Shed'''&nbsp;&nbsp;</span>]]
  
−
==Showcase==
+
:'''[[Autodesk Fusion Tips]]'''
 +
:'''[[VCarve Tips]]'''
 +
:'''[[Inkscape Tips]]'''
 +
:'''[[QR Codes]]'''
  
−
===Photo Gallery===
+
==Hand-Curated Links==
−
<gallery>
+
'''Links to member-recommended external sites:'''
−
File:Wood shop tool sign.jpg|alt=Wood shop tool sign|<center>'''Wood shop tool sign'''</center>
+
:'''[https://colowood.com/index.php Colorado Woodworkers' Guild]''' — learn and share information about woodworking
−
File:How it Started sign.jpg|alt=How it Started sign|<center>'''How it Started sign'''</center>
+
:'''[https://www.printables.com/@Festool/models FESTOOL 3D Models]''' — on Printables.com
−
</gallery>
+
:'''[https://www.youtube.com/user/StumpyNubsWorkshop/videos Stumpy Nubs Woodshop]''' — on YouTube
 +
:'''[https://owwm.org/ Old Woodworking Machines (OWWM)]'''
  
−
==Other Fun Stuff==
+
==For Additional Help==
−
===BodgedButWorks -- YouTube channel===
+
:Use the PPM Slack channel #wood-shop
−
:'''[https://www.youtube.com/watch?v=BGnVt29NEG8 Inkscape Tutorial, For Engineers And Shaper Origin Users]'''
+
:[[How To Slack#PPM Channel  Names and Descriptions|'''List of all PPM Slack channels''']]
 +
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
  
−
===[http://vintagemachinery.org/mfgindex/detail.aspx?id=655&tab=4 Vintage Machinery Photo Index -- POWERMATIC]===
+
{{Template:Footer}}
−
<br>
+
{{Template:Ideas into reality}}
−
<hr>
+
<p style="padding:0.2em 0.4em;  background:#3DA942; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 +
<!--Bandsaw Tablesaw Woodshop-->

Latest revision as of 18:03, 23 November 2024

Level 3 badge used at Pikes Peak Makerspace

The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of

both Level 2 and Level 3 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

Wood Shop Area hand tools should be marked with green tape, paint, or powder coating.

The SawStop in the PPM Wood Shop cannot be turned on without scanning the RFID card of a certified member in our T.E.S.L.A. Access system.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

 


Wood Shop Policy, Safety, and Orientation

All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.

Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.

Emergency Safety - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of emergency.

  • By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your responsibility.
  • Damage to tools, equipment, the shop itself caused by your actions is solely your responsibility.

Impairment - The use of the Wood Shop equipment requires you to be alert, attentive and focused.

  • Do not use the Wood Shop, any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
  • Likewise, ensure that you are well-rested and alert.

Personal Protective Equipment (PPE)

  • Safety Glasses - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop. 
    • Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools. (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most prescription glasses are not impact resistant or provide side protection. If you use prescription glasses, then put an ANSI Z87-1 goggle over them.
  • Hearing Protection - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood Shop. There are two types of hearing protection
    • Soft Foam earplugs are available. To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good seal.
    • Ear muffs are available. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
  • Respiratory Protection - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust collector).
  • Shoes - Closed toe shoes are required. If working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if materials or tools are dropped.
  • Gloves - Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
  • Hair and Clothing - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is secured.
  • Jewelry - Remove rings, bracelets and any other jewelry that could get caught when operating equipment.

Hazards

The following are a list of hazards that should be considered while working in the Wood Shop.

  • Wood Dust - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
  • Noise - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
  • Electrical Hazards - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
  • Machine Maintenance - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
  • Fire and Explosion - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, and sawdust, (and also paints, oils finishes, solvents, and other flammable liquids). Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.
  • Electrical panels must be kept clear.
  • Fire extinguishers and exit routes must always be accessible.
  • It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of equipment.

Reporting Issues

Injuries

If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment.

Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:

  • Call 719-445-MAKE(6253) and leave a detailed message including:

   ☐ Your name and phone number

   ☐ Who was injured and their phone number

   ☐ Describe the injury, part of body

   ☐ Detail what type of medical attention was sought

   ☐ Describe how the accident occurred

   ☐ Include the equipment that was being used

  • Send a direct message to our Executive Director on Slack
  • Use the form on the PPM website to Contact Us
    • Include all the same information listed in the checklist above

Equipment Issues

Red-Tag Equipment – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tags-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Red Tags
• Any damage to tools or broken equipment MUST be reported in a direct message to an Area Deputy or our Director.
• Use a Red Tag to designate the broken equipment.
• Additionally, report the issue in our Slack #red-tags-issues channel.

Equipment Information

Be knowledgeable about the equipment that you are using.
Laminated Placards
  • There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training ("PPM Jointer Safety and Operations", for example)
  • More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.
Getting Help
  • Use the #wood-shop channel on Slack to get help with specific equipment.
  • Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.

Dust Collection and Air Handler

Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.

  • Fine particulate matter is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
  • Fire Danger – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, and electrical boxes. Dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housings, and other sources.
  • Annoyance – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean environments.

Reclaimed Materials Usage

Use Metal Detector

Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.

Upcycled Wood

Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.

Here are some resources about reclaimed wood:

https://earth911.com/health/how-to-safely-use-pallet-wood/

https://rockinwoodusa.com/is-reclaimed-wood-safe/

Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.

Banned Materials

These materials are not compatible with the blades and bits in the Wood Shop:

  • Plastics
  • Metals
  • Composite decking material ("Trex", for example)

The equipment in the Wood Shop is configured with blades and bits for working with the following materials:

  • Solid wood
  • Plywood
  • MDF (Medium Density Fiberboard)
  • Upcycled/recycled wood (see caution on use above)
Paint or Solvents

Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is bothersome.

  • Use the ventilated room, outdoors, or other location for applying paints or solvent-based finishes.

Check-in/ Check-out form

All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.

Project Storage

Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to removal.

All projects left in the woodshop must be labeled with green Project Storage tags.

Clean-up

If you do not have time to clean up, you do not have time to build it.

Woodworking projects tend to have 3 parts:

“Plan it. Build it. Clean up after it.”

☐ Clean up the area and equipment that you used.

☐ All equipment should be ready for the next member to use right away.

☐ Return all hand tools to their proper location after use. If you don't know where it goes, ask an Area Deputy. This rule applies to all areas of our Makerspace.

☐ Go to the Cleaning Sequence sheets hanging on the Wood Shop door:

Cleaning Sequence (Required)

To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip chart.

If you have comments about the cleaning sequence, leave a note on the Check-out form.

Classes

Woodshop Orientation & SawStop Certification:
A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
Sign up for upcoming classes on Meetup! Upcoming events, including classes, on Meetup

Training

If you need help with a tool or technique, use the #wood-shop channel on Slack.
POWERMATIC MANUALS
Woodworking terminology
Introduction to Woodworking‏‎ (15 November 2015)

Tips

Links to external sites:

Fine Wood Working Magazine Shop Tips
Our wood working-related books — on LibraryThing.com

Equipment Lists

POWERMATIC Equipment List

Picture Item Manufacturer Model Number Power
Requirements 		Resources Training
Video Link
3520B POWERMATIC lathe
Woodturning Lathe,

18" extension, swing away tail stock,
ONEWAY bowl chuck

Level 3 badge
Powermatic-logo
 POWERMATIC 3520B Single Phase,

220V, 60Hz, 6.2A

Operating Instructions and Parts Manual
PWBS-14 POWERMATIC bandsaw
 14" Woodworking Band Saw,

rip and cross-cut fences,
5" riser

Level 3 badge
Powermatic-logo
 POWERMATIC PWBS‑14 Single Phase,

115V, 60Hz, 11A

Operating Instructions and Parts Manual
15HH POWERMATIC planer
 15-inch Planer,

4" Dust Port

Level 3 badge
Powermatic-logo
 POWERMATIC 15HH Single Phase,

230V, 60Hz, 15A

Operating Instructions and Parts Manual
6" Belt/
12" Disc
Combination Sander
Level 3 badge
Powermatic-logo
 POWERMATIC 30B 3-phase Replacement Parts
  • Lathe chuck

    Lathe chuck

  • Lathe tools

    Lathe tools

Sharpening and Sanding Equipment List

Picture Item Manufacturer Model Number Resources
Grinder station
 8" bench grinder, blue and white grinding stones,
Wolverine and Veritas sharpening devices,
buffing wheel and compounds 		JET JET

JWBG‑8 

Wolverine Dressing Jig Instructions
variable speed buffer
and buffing wheels
Logo DeWalt
 DeWALT

DWP849

sanding belts, disks and sheets
3M logo
 3M
Granite block
 precision ground granite block, 12"x18"x3"
Do not store tools, or anything, on our granite block to avoid damage to its surface.

Wood Shop Equipment List

Picture Item Manufacturer Model Number Power
Requirements 		Resources
JET Jointer
 8" Jointer with Shelix cutting head JET JJ-8CS single phase,

110 Volts,

15 Amps,

60HZ

JET
Miter saw with new dust hood
 12" Sliding Compound

Miter Saw, dust hood & RIGID vacuum

Logo DeWalt
 DeWALT DW708 single phase,

110 Volts,

13 Amps,

60HZ

WORK SHARP sharpener
 wood tool sharpener WORK SHARP WS3000 single phase,

110 Volts,

2 Amps,

60HZ

DELTA Router Table
 Router and Shaper with bits on rolling carts DELTA single phase,

110 Volts,

9 Amps,

60HZ

Floor drill press PORTER-CABLE single phase,

110 Volts,

8 Amps,

60HZ

PORTER-CABLE
6" Disk 4" Belt Sander WEN 6502T single phase,

110 Volts,

4.3 Amps,

60HZ

WEN

6502T

1" x 30" belt & 5" disk sander Dremel single phase,

110 Volts,

3 Amps,

60HZ

BAYLEIGH AIR FILTRATION SYSTEM
 AIR FILTRATION SYSTEM

with remote

BAILEIGH AFS-2400 single phase,

110 Volts,

14 Amps,

60HZ

BAILEIGH

AFS-2400

Box fan
 Box fan,

20", 3-speed

LASKO
Dust Collector
1.5HP 6" inlet 		DELTA DELTA
  • Wood Shop Cable Management

    Cable Management
    by Nick Hopkins
    (11/06/22)

  • AFS-2400 nameplate

    AFS-2400 nameplate

  • Bench grinder

    Bench grinder

  • JET Jointer nameplate

    JET Jointer nameplate


FESTOOL Equipment List — Level 3 Tools

Picture Item Manufacturer Model
Number 		Resources Owner
Festool Track Saw
 Track Saw
Level 3 badge.png
Festool-logo.min
 FESTOOL

TS 55 EQ

John Norton
Festool Half Sheet Sander
 Sander (Half Sheet)
Level 3 badge
Festool-logo.min
 FESTOOL

RS 2-E-Plus

John Norton
Festool Orbital Sander
 Sander (Orbital)
Level 3 badge
Festool-logo.min
 FESTOOL

ETS 150/5 EQ-Plus

John Norton
Festool Dust Extractor
 Dust Collector
Level 3 badge
Festool-logo.min
 FESTOOL

CLEANTEC CT 22 E

John Norton

Multifunction Table
Level 3 badge
Festool-logo.min
 FESTOOL

1080

John Norton
  • Festool Track Saw in Systainer

    FESTOOL Track Saw,
    in Systainer

  • Festool Orbital Sander in Systainer

    FESTOOL Orbital Sander,
    in Systainer

  • Festool Half Sheet Sander in Systainer

    FESTOOL Half Sheet Sander,
    in Systainer

Power Tools

'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly

Picture Item Manufacturer Model
Number 		Resources
Milwaukee Compact Router
 COMPACT ROUTER

M18 FUEL

Milwaukee 2723-20 2723-20

OPERATOR'S MANUAL

JIG SAW Milwaukee
 JIG SAW

M18 FUEL

D-Handle

Milwaukee 2737-20 2737-20

OPERATOR'S MANUAL

Makita Circular Saw
 Circular Saw,

185mm

Makita logo
 Makita

5007NB

5007NB

product detail on makita.com

Makita Router 3601B
 Router
Makita logo
 Makita

3601B

INSTRUCTION MANUAL
DeWALT sawsall
 RECIPROCATING SAW
Logo DeWalt
 DeWALT

DW304P

DeWALT jigsaw
 JIG SAW
Logo DeWalt
 DeWALT

DW331

BOSCH jigsaw 1590EVS
 Jig Saw BOSCH 1590EVS
AIR NAILER
 AIR NAILER/

STAPLER

CENTRAL PNEUMATIC 64269 64269
Biscuit Joiner In Red Case
 Biscuit

Joiner

Craftsman Craftsman
Circular

Saw

Craftsman Craftsman
Belt Sander

(handheld)

Craftsman Craftsman
Belt Sander

(handheld)

Logo RYOBI
 RYOBI
Sander PORTER-CABLE
 Orbital Sander PORTER-CABLE Quicksand
Sander Mouse

Mouse Sander/Polisher

Logo BLACK&DECKER.png
 BLACK&DECKER

FMS50

Clamps

Item Manufacturer Model Quantity Owner
6" Wooden Handscrew Clamps ROCKLER Wooden Handscrew Clamps

2

 PPM
8" Quick Clamp Irwin Irwin

Quick Grip

2

 PPM
12" Quick Clamp Irwin Irwin

Quick Grip

2

 PPM
36" Quick Clamp Irwin Irwin

Quick Grip

1

 Bill Epperson
30" Pipe Bar Clamp Bessey BESSEY Tools North America

4

 Bill Epperson
48" Pipe Bar Clamp Bessey BESSEY Tools North America

2

 Bill Epperson
60" Pipe Bar Clamp Bessey BESSEY Tools North America

2

 Bill Epperson
36" Quick Release Steel Bar Clamp Jorgensen CABINET MASTER 8036

5

 PPM
6" Quick Release Bar Clamp

2

 Bill Epperson
12" Quick Release Bar Clamp

0

 PPM
18" Quick Release Bar Clamp

0

 PPM
24" Quick Release Bar Clamp

2

 PPM
30" Quick Release Bar Clamp

0

 PPM
36" Quick Release Bar Clamp ITEM 60539

6

 PPM
(donated by David Wasmer, Sr.)
60" Quick Release Bar Clamp ITEM 60673

2

 PPM
50" CLAMP & CUT EDGE GUIDE ITEM 66581

1

 PPM
6" Ratcheting Bar Clamp

0

 PPM
12" Ratcheting Bar Clamp

6

 PPM
24" Ratcheting Bar Clamp

0

 PPM


Hand Tools

Picture Item Manufacturer Owner
Wood clamp donation
 Wood Clamps PPM
Ten million dollar stick
 10 Million Dollar Stick PPM
Forstner bit set
 Forstner bit set

(16 bits)

PPM
Wood Shop Area hand tools should be marked with green tape or paint or powder coating.
Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of membership)
Company Website Benefit Directions to
Logo WOODCRAFT
 Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
Logo CO Lumber
 CO Lumber Specialties 10% discount 3636 Stone Avenue
Logo General Air
 GENERAL AIR 10% discount 3031 N Nevada Ave.
Logo ACE
 ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street
Map of stores that provide PPM member discounts
Map of helpful local resources curated by our makers
At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.
The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Donated materials are available for member use, but should be compensated for by making a donation through one of the following methods:

Donate via PayPal: bit.ly/ppmstuff
Or, leave donations in a black payment box.

Related Pages

Links to related PPM Wiki pages:

  Wood Shop — SawStop  
  CNC Router Table   - make a reservation
  Metal Shop  
  Vented Room   - make a reservation
  Shed  
Autodesk Fusion Tips
VCarve Tips
Inkscape Tips
QR Codes

Hand-Curated Links

Links to member-recommended external sites:

Colorado Woodworkers' Guild — learn and share information about woodworking
FESTOOL 3D Models — on Printables.com
Stumpy Nubs Woodshop — on YouTube
Old Woodworking Machines (OWWM)

For Additional Help

Use the PPM Slack channel #wood-shop
List of all PPM Slack channels
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.


Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

 

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=Wood_Shop&oldid=18016"