Difference between revisions of "Vinyl Cutting"

Latest revision as of 22:10, 19 November 2024

The Vinyl Cutting Area at Pikes Peak Makerspace (PPM) consists mostly of Level 2 equipment.

Additional PPM training is required to use any of our Level 2 equipment.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Classes

Teacher — LaNita

PPM announces its Upcoming events, including classes, on Meetup

Vinyl cutter classes are held every 2nd Tuesday of the month. *Members Only*

To help out with the Vinyl Cutter, post your ideas and comments on our Slack channel #vinyl-cutter

Training

- Pick the small Application Launcher button from CorelDRAW, and then "Send Cut Lines to CM3".

- If you receive a no Media Error, and your job pauses, try pressing ENTER to override the sensor and continue your cutting.

- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.

Do not engrave or cut Oracal ORAMASK 813 Stencil Film
Do not engrave or cut Con-Tact brand paper

Vinyl Cutter
Overview and Instructions.pdf

Links to external sites:

CE6000 Series Video Training

Cricut craft cutter — "Learn from the pros." (YouTube)

Silhouette craft cutter — Get Started/Tutorials/Videos

Tips

The vinyl cutting PC is not a design workstation. Please limit the use of the station to cutting only.

Equipment Lists

24" Graphtec cutter

Picture	Item	Manufacturer	Model	Resources
	24" Cutting Plotter	Graphtec	CE5000‑60	manual

Vinyl Cutting Computer

Picture	Item	Application Software	System Software
	Computer, HP h8-1117c Dell 1905FP monitor	Cutting Master 3, CorelDRAW X6, Graphtec Pro Studio	Microsoft Windows 10 Pro

Hand Tools

Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:

(bring proof of membership)


Company	Website	Benefit	Directions to
	Woodcraft of Colorado Springs	10% discount	4438 Austin Bluffs Parkway
	CO Lumber Specialties	10% discount	3636 Stone Avenue
	GENERAL AIR	10% discount	3031 N Nevada Ave.
	ACE Hardware Uintah Gardens	10% discount	1830 W Uintah Street

Map of stores that provide PPM member discounts

Map of helpful local resources curated by our makers

At home LightBurn subscriptions can be purchased at a discounted rate for being a PPM member.

The discount code is saved as a Pinned Message in our 'laser-cutter' channel in Slack.

Policies

Materials

Donate for "Vinyl Stickers and R Tape" via PayPal: bit.ly/ppmstuff

Or, leave donations in a black payment box, or use a QR code.

- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.

Do not engrave or cut Oracal ORAMASK 813 Stencil Film
Do not engrave or cut Con-Tact brand paper

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tags-issues

This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Member Showcase

Outdoor window sign
for our Makerspace building
outdoor vinyl sign for
Manitou Art Center parking lot
outdoor vinyl sign for
Manitou Art Center parking lot
Dewey
by Nicolas Ordahl
Rockclimber
by Nick T.

For even more member projects, visit our #showcase channel on Slack, or follow our social media links.

Related Pages

Links to related PPM Wiki pages:

Computers — Windows

CorelDRAW X6 Tips

Cutting Master 3 Tips

Adobe Illustrator Tips

Inkscape Tips

SVG File Format Tips

QR Codes

For Additional Help

Use the PPM Slack channel #vinyl-cutter

List of all PPM Slack channels

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any information that is outdated.

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative processes by providing shared space, shared tools, materials, software, and a knowledge base to turn their ideas into reality.

@@ Line 7: / Line 7: @@
 <br>
 <br>
+{{Template:Contact Us}}
 <p style="padding:0.2em 0.4em;  background:#D0DD27; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
 <br>
-{{Template:Safety}}
+==Classes==
+:'''Teacher — LaNita'''
+::PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+::Vinyl cutter classes are held every 2nd Tuesday of the month. *Members Only*
+::To help out with the Vinyl Cutter, post your ideas and comments on our Slack channel #vinyl-cutter
+== Training ==
+:'''- Pick the small Application Launcher button''' from CorelDRAW, and then "Send Cut Lines to CM3".
+:'''- If you receive a no Media Error,''' and your job pauses, try pressing ENTER to override the sensor and continue your cutting.
+:'''- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.'''
+::* Do not engrave or cut Oracal ORAMASK 813 Stencil Film
+::* Do not engrave or cut Con-Tact brand paper
+<br>
 <br>
-<p style="padding:0.2em 0.4em;  background:#D0DD27; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
-==Classes and Training==
-===[[New Member Orientation]]===
-===Area Leader — LaNita===
-:To help out with the Vinyl Cutter, post your ideas and comments on our Slack channel #vinyl-cutter.
-===Classes===
+<gallery widths="200" heights="125">
-:PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
+File:Graphtec CE 5000 Vinyl Plotter Overview and Instructions.pdf|alt=Graphtec CE 5000 Vinyl Plotter Overview and Instructions.pdf|'''Vinyl Cutter<br>Overview and Instructions.pdf'''
-===Training===
-'''- Pick the small Application Launcher button''' from CorelDRAW, and then "Send Cut Lines to&nbsp;CM3".
-'''- If you receive a no Media Error,''' and your job pauses, try pressing ENTER to override the sensor and continue your&nbsp;cutting.
-'''- Some vinyl materials contain PVC. Do not use these on either of our laser&nbsp;engravers.'''
-:(e.g. Oracal ORAMASK 813 Stencil Film and Con-Tact brand&nbsp;paper)
-<gallery>
-File:Graphtec CE 5000 Vinyl Plotter Overview and Instructions.pdf|alt=Graphtec CE 5000 Vinyl Plotter Overview and Instructions.pdf|<center>'''Vinyl Cutter<br>Overview and Instructions.pdf'''</center>
 </gallery>
 '''Links to external sites:'''
 :'''[https://www.graphtecamerica.com/cp-faq-video-ce6000-english CE6000 Series Video Training]'''
-:
-:'''[https://learn.cricut.com/ Cricut] craft cutter''' — "Learn from the pros."
+:'''[https://learn.cricut.com/ Cricut] craft cutter''' — "Learn from the pros." (YouTube)
 :'''[https://www.silhouette101.com/ Silhouette] craft cutter''' — Get Started/Tutorials/Videos
-===Tips ===
+==Tips==
 :The vinyl cutting PC is not a design workstation. Please limit the use of the station to cutting only.
-==Equipment Lists ==
+==Equipment Lists==
 ===24" Graphtec cutter===
@@ Line 51: / Line 48: @@
 |Manufacturer
 |Model
-|Reference<br>Materials
+|Resources
 |-
 |[[File:Vinyl_cutter.jpg|alt=vinyl cutter|frameless|150x150px]]
@@ Line 72: / Line 69: @@
 | style="vertical-align:middle;" |Picture
 |Item
-|Manufacturer/<br>Model
+|Application<br>Software
 |System <br>Software
-|Application<br>Software
 |-
 |[[File:Vinyl Cutting Workstation.jpg|alt=Vinyl Cutting Workstation|center|frameless|160x160px|Vinyl Cutting Workstation]]
-|'''PC'''
+|'''Computer,'''
-|HP
+HP h8-1117c
-h8-1117c
+Dell 1905FP monitor
+|Cutting Master 3,
+[https://www.coreldraw.com/en/ CorelDRAW X6,]
+[https://www.graphtecamerica.com/cp-software-pro-studio Graphtec Pro Studio]
 |Microsoft
-Windows 10 Pro
+Windows 10<br>Pro
-|[[CorelDRAW X6 Tips|CorelDRAW X6,]]
-[[Cutting Master 3 Tips|Cutting Master 3,]]
-Graphtec Pro Studio
-|-
-|
-|'''monitor'''
-|Dell
-FP
-|
-|
-|-
-|
-|'''wired mouse'''
-'''and keyboard'''
-|Amazon,
-Dell
-|
-|
 |- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
 | style="vertical-align:middle;" |
-|
 |
 |
@@ Line 109: / Line 90: @@
 |}
-===Hand Tools ===
+===Hand Tools===
 :Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
-[[Donations Received|'''Donations Received''']]
-[[Wish List#Vinyl Cutting|'''Wish List''']]
-:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
 ==Benefits==
@@ Line 123: / Line 100: @@
 :'''''Or, leave donations in a black payment box, or use a QR code.'''''
-:'''Some vinyl materials contain PVC. Do not use these on either of our laser&nbsp;engravers.'''
+:'''- Some vinyl materials contain PVC. Do not use these on either of our laser engravers.'''
-::(e.g. Oracal ORAMASK 813 Stencil Film and Con-Tact brand paper
+::* Do not engrave or cut Oracal ORAMASK 813 Stencil Film
+::* Do not engrave or cut Con-Tact brand paper
+<br>
+<br>
 {{Red Tags}}
-{{Scrap and Trash}}
-==Related Software==
-'''Links to other PPM Wiki pages:'''
-===[[CorelDRAW X6 Tips]]===
-===[[Cutting Master 3 Tips]]===
 ==Member Showcase==
-<gallery>
+<gallery widths="200" heights="125">
-File:Round PCB PPM clock.jpg|alt=Round PCB PPM clock|<center>Round PCB<br>PPM clock<br>(February 2020)</center>
+File:PPM outdoor window sign.jpg|alt=PPM outdoor window sign|'''Outdoor window sign<br>for our Makerspace building'''
-File:PPM outdoor window sign.jpg|alt=PPM outdoor window sign|<center>Outdoor window sign<br>for our Makerspace</center>
+File:IMG 4820.jpg|alt=vinyl parking lot sign (Manitou Art Center)|'''outdoor vinyl sign for<br>Manitou Art Center parking lot'''
-File:IMG 4820.jpg|alt=vinyl parking lot sign (Manitou)|<center>vinyl sign for<br>MAC parking lot</center>
+File:Vinyl sign Einstein.jpg|alt=vinyl parking lot sign|'''outdoor vinyl sign for<br>Manitou Art Center parking lot'''
-File:Vinyl sign Einstein.jpg|alt=vinyl parking lot sign|<center>vinyl sign for<br>MAC parking lot</center>
+File:Dewey.jpg|alt=Dewey|'''Dewey<br><i>by Nicolas Ordahl</i>'''
-File:Dewey.jpg|alt=Dewey|<center>Dewey<br>by Nicolas Ordahl</center>
+File:Rockclimber.jpg|alt=Rockclimber|'''Rockclimber<br><i>by Nick T.</i>'''
-File:Rockclimber.jpg|alt=Rockclimber|<center>Rockclimber<br>by Nick T.</center>
 </gallery>
 {{Template:Showcase_blurb}}
 ==Related Pages==
 '''Links to related PPM Wiki pages:'''
+:[[Computers|<span style="color:#000000; background:#D0DD27">&nbsp;&nbsp;'''Computers — Windows'''&nbsp;&nbsp;</span>]]
+:'''[[CorelDRAW X6 Tips]]'''
+:'''[[Cutting Master 3 Tips]]'''
+:'''[[Adobe Illustrator Tips]]'''
+:'''[[Inkscape Tips]]'''
 :'''[[SVG File Format Tips]]'''
+:'''[[QR Codes]]'''
-:[[Assembly_Table_(Clean_Projects)|<span style="color:#000000; background:#FDD1AC">&nbsp;&nbsp;'''Assembly Table (Clean Projects)'''&nbsp;&nbsp;</span>]]
-:[[Computers|<span style="color:#000000; background:#D0DD27">&nbsp;&nbsp;'''Computers'''&nbsp;&nbsp;</span>]]
 ==For Additional Help==
 :Use the PPM Slack channel #vinyl-cutter
-:[[How To Slack#Channel Names and Descriptions|'''List of all PPM Slack channels''']]
+:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
 :Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
 {{Template:Footer}}
-<br>
+{{Template:Ideas into reality}}
 <p style="padding:0.2em 0.4em;  background:#D0DD27; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
-{{Template:Ideas into reality}}
 [[Category:Hardware]]
-[[Category:Volunteers Needed]]
 <!--Woodshop-->