Wood Shop: Difference between revisions

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
 
(181 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]
All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.


'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''  
'''Links to related PPM Wiki pages:'''


'''both Level 2 and Level 3 equipment.'''
:[[Wood Shop — SawStop table saw|<span style="color:#FFFFFF; background:#3DA942">&nbsp;&nbsp;'''Wood Shop — SawStop table saw'''&nbsp;&nbsp;</span>]]


Additional PPM training and then certification is required to use any of our Level 3 equipment.
:[[Wood Shop — Festool power tools|<span style="color:#FFFFFF; background:#3DA942">&nbsp;&nbsp;'''Wood Shop — Festool power tools'''&nbsp;&nbsp;</span>]]
<br>
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|90x90px|PPM TRAINING & CERTIFICATION REQUIRED]]


Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.
'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of''' '''both Level&nbsp;2&nbsp;and Level 3 equipment.'''


We are grateful for their commitment and dedication to our community.
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.


'''Wood Shop Area''' hand tools should be marked with <span style="color:#42B649">'''green'''</span> tape, paint, or powder&nbsp;coating.
Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for&nbsp;all.


The SawStop in the PPM Wood Shop cannot be turned on without scanning the RFID card of a certified member in our TESLA&nbsp;Access&nbsp;system.
We are grateful for their commitment and dedication to our community.<br>
<br>
<br>
<br>
{{Template:Contact Us}}
{{Template:Contact Us}}


<p style="padding:0.2em 0.4em; background:#42B649; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
<hr style="height:2.5px; background:#3DA942;">
 
<br>
<br>
===Wood Shop Policy, Safety, and Orientation===
===Wood Shop Policy, Safety, and Orientation===
All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.     
All Wood Shop users are required to follow all Wood Shop Policies and Safety&nbsp;Procedures.     


'''Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.'''   
'''Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.'''   
Line 27: Line 29:
'''Emergency Safety''' - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of&nbsp;emergency.  
'''Emergency Safety''' - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of&nbsp;emergency.  


*By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your responsibility.
*By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your&nbsp;responsibility.
*Damage to tools, equipment, the shop itself caused by your actions is solely your&nbsp;responsibility.
*Damage to tools, equipment, the shop itself caused by your actions is solely your&nbsp;responsibility.


'''Impairment''' - The use of the Wood Shop equipment requires you to be alert, attentive and focused.  
'''Impairment''' - The use of the Wood Shop equipment requires you to be alert, attentive and&nbsp;focused.


* Do not use the Wood Shop, or any PPM tools, if you are under the influence of drugs or&nbsp;alcohol.  
*Do not use the Wood Shop, any PPM work area, or any PPM tools, if you are under the influence of drugs or&nbsp;alcohol.
* Likewise, ensure that you are well-rested and&nbsp;alert.  
*Likewise, ensure that you are well-rested and&nbsp;alert.


====Personal Protective Equipment (PPE)====
====Personal Protective Equipment (PPE)====
Line 39: Line 41:
*'''Safety Glasses''' - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop.   
*'''Safety Glasses''' - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop.   
**'''Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools.''' (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most&nbsp;prescription glasses are not impact resistant or provide side protection. If&nbsp;you use prescription glasses, then put an ANSI Z87-1 goggle over them.
**'''Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools.''' (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most&nbsp;prescription glasses are not impact resistant or provide side protection. If&nbsp;you use prescription glasses, then put an ANSI Z87-1 goggle over them.
*'''Hearing Protection''' - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood Shop. There are two types of hearing&nbsp;protection
*'''Hearing Protection''' - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood&nbsp;Shop.
**Soft Foam earplugs are available. To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good&nbsp;seal.
**'''There are two types of hearing&nbsp;protection available at&nbsp;PPM:'''
**Ear muffs are available. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
**'''Soft foam earplugs.''' To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good&nbsp;seal.
**'''Ear muffs'''. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
*'''Respiratory Protection''' - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust&nbsp;collector).
*'''Respiratory Protection''' - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust&nbsp;collector).
*'''Shoes''' - Closed toe shoes are required. If&nbsp;working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if material is&nbsp;dropped.
*'''Shoes''' - Closed toe shoes are required. If&nbsp;working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if materials or tools are&nbsp;dropped.
*'''Gloves''' - Gloves should not be worn when using powered equipment (saws, jointers, drills, etc.) Leather gloves can be worn for handling materials, but not when operating&nbsp;machinery.
*'''Gloves''' - Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating&nbsp;machinery.
*'''Hair and Clothing''' - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is&nbsp;secured.
*'''Hair and Clothing''' - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is&nbsp;secured.
*'''Jewelry''' - Remove rings, bracelets and any other jewelry that could get caught when operating&nbsp;equipment.
*'''Jewelry''' - Remove rings, bracelets and any other jewelry that could get caught when operating&nbsp;equipment.
Line 52: Line 55:
*'''Wood Dust''' - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
*'''Wood Dust''' - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
*'''Noise''' - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise&nbsp;levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
*'''Noise''' - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise&nbsp;levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
*'''Electrical Hazards''' - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on Red-Tag Issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
*'''Electrical Hazards''' - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on #red-tag-issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
*'''Machine Maintenance''' - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on Red-Tag Issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
*'''Machine Maintenance''' - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on #red-tag-issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
*'''Fire and Explosion''' - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, sawdust, and flammable materials such as paints, oils finishes, solvents, etc. Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.
*'''Fire and Explosion''' - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, and sawdust, (and also paints, oils finishes, solvents, and other flammable liquids). Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.
[[File:Electrical panel covered.jpg|alt=Electrical panel with wood cover|thumb|'''Electrical panel''']]
 
* Electrical panels must be kept clear.
*Electrical panels must be kept clear.
* Fire extinguishers and exit routes must always be accessible.
*Fire extinguishers, first aid kits, eye washes stations, and exit routes must always be accessible.
*It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of equipment.
*It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of&nbsp;equipment.


====Reporting Issues====
====Reporting Issues====


=====Injuries=====
=====Injuries=====
'''If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment. Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:'''
'''If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment.'''
 
'''Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:'''
*Call 719-445-MAKE(6253) and leave a detailed message including:
*Call 719-445-MAKE(6253) and leave a detailed message including:
**Your name and phone number
&nbsp;&nbsp;&nbsp;☐ Your name and phone number
**Who was injured and their phone number
 
**Describe the injury, part of body
&nbsp;&nbsp;&nbsp;☐ Who was injured and their phone number
**Detail what type of medical attention was sought
 
**Describe how the accident occurred (including the equipment that was being used.
&nbsp;&nbsp;&nbsp;☐ Describe the injury, part of body
 
&nbsp;&nbsp;&nbsp;☐ Detail what type of medical attention was sought
 
&nbsp;&nbsp;&nbsp;☐ Describe how the accident occurred
 
&nbsp;&nbsp;&nbsp;☐ Include the equipment that was being used
 
*Send a direct message to our Executive Director on Slack
*Send a direct message to our Executive Director on Slack
*Send an email to contact@pikespeakmakerspace.org  
*Use the form on the PPM website to [https://pikespeakmakerspace.org/Contact '''Contact Us''']
**Include all the same information listed above
**Include all the same information listed in the checklist above


=====Equipment Issues=====
'''Equipment Issues'''
'''Red-Tag Equipment''' – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tags-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment promptly.


======[[New Member Orientation#Red Tags|Red Tags]]======
'''Red-Tag Equipment''' – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tag-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the&nbsp;equipment.
'''•''' Any damage to tools or broken equipment MUST be reported in a direct message to a space leader/Director.


'''•''' Use a Red Tag, which can be found in the '''red tag area''', to designate the broken equipment.
=====Red Tags=====
 
:'''•''' Any damage to tools or broken equipment MUST be reported in a direct message to an Area Deputy or our Director.
'''•''' Additionally, report the issue in our Slack #red-tags-issues channel.  
:'''•''' Use a '''[[New Member Orientation#Red Tags|Red Tag]]''' to designate the broken equipment.
:'''•''' Additionally, report the issue in our Slack #red-tag-issues channel.


====Equipment Information====
====Equipment Information====
'''Be knowledgeable about the equipment that you are using.'''
:'''Be knowledgeable about the equipment that you are using.'''


=====Laminated Placards=====
=====Laminated Placards=====
*There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training (e.g., PPM Jointer Safety and Operations)
*There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training ("PPM Jointer Safety and Operations", for&nbsp;example)
*More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.
*More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.


=====Getting Help=====
=====Getting Help=====
*Use the #wood-shop channel on Slack to get help with specific equipment.
*Use the #wood-shop channel on Slack to get help with specific equipment.
*Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.
*Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.


Line 100: Line 109:
'''Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.'''
'''Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.'''
*'''Fine particulate matter''' is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
*'''Fine particulate matter''' is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
*'''Fire Danger''' – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, electrical boxes. The&nbsp;amount of dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housing, etc.
*'''Fire Danger''' – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, and electrical boxes. Dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housings, and other sources.
*'''Annoyance''' – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean environments.
*'''Annoyance''' – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean&nbsp;environments.
 


====Reclaimed Materials Usage====
====Reclaimed Materials Usage====
Line 108: Line 116:
Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.
Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.


===== Upcycled Wood=====
=====Upcycled Wood=====
Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.
Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.


Line 119: Line 127:
Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.
Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.


==== Banned Materials====
====Acceptable Materials====
'''These materials are not compatible''' with the blades and bits in the Wood Shop: 
The equipment in the Wood Shop is configured with blades and bits for working with the following materials:
*Plastics
*Metals
*Composite decking material (e.g. Trex)
The equipment in the Wood Shop is configured with blades and bits for working with the following materials:
 
*Solid wood
*Solid wood
*Plywood
*Plywood
*MDF (Medium Density Fiberboard)
*MDF (Medium Density Fiberboard)
*Upcycled/recycled wood (see caution on use above)
*Upcycled/recycled wood (see caution on use above)
'''Banned Materials''' 
*Metals
*Composite decking material ("Trex", for example - requires a special blade and will quickly dull standard woodworking blades)
'''Plastics & Resin'''
It is important to research all materials before cutting and take precautions to ensure there are no harmful fumes released and no chips blocking the tool's functionality or the dust collection ability.


=====Paint or Solvents =====
=====Paint or Solvents=====
Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is bothersome.  
Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is&nbsp;bothersome.  


*Use the ventilated room, outdoors, or other location for applying paints or solvent based finishes.
*Use the ventilated room, outdoors, or other location for applying paints or solvent-based finishes.


====Check-in/ Check-out form====
====Check-in/ Check-out form====
'''All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.'''
'''All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.'''


====Project Storage ====
====Project Storage====
Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to removal.  
Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to&nbsp;removal.  


'''All projects left in the woodshop must be labeled with green Project Storage tags.'''
'''All projects left in the woodshop must be labeled with green Project Storage tags.'''


====Clean-up====
====Clean-up====
'''It is said, “Woodworking projects tend to have 3 parts: Plan it. Build it. Clean up after it.”'''
If you do not have time to clean up, you do not have time to build it.


If you do not have time to clean up, you do not have time to build it.  
'''Woodworking projects tend to have 3 parts:'''
#Clean-up the area and equipment that you used. All equipment should be ready for the next user to walk right up and use.
:'''“Plan it. Build it. Clean up after it.”'''
#Return all hand tools to their proper location after use. If you don't know where it goes, ask an area leader. This rule applies to all areas of our Makerspace.
::☐ Clean up the area and equipment that you used.
#Go to the '''Cleaning Sequence''' sheets hanging on the Wood Shop door. More details below.
::☐ All equipment should be ready for the next member to use right away.
::☐ Return all hand tools to their proper location after use. If you don't know where it goes, ask an Area Deputy. This rule applies to all areas of our&nbsp;Makerspace.
::☐ Go to the '''Cleaning Sequence''' sheets hanging on the Wood Shop door:


=====Cleaning Sequence (Required)=====
====='''Cleaning Sequence (Required)'''=====
To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip chat.  
To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip&nbsp;chart.  


If you have comments about the cleaning sequence, leave a note on the Check-out form.
If you have comments about the cleaning sequence, leave a note on the Check-out form.


== Classes and Training==
==Classes==
===Classes===
'''Woodshop Orientation & SawStop Certification:'''
:'''Woodshop Orientation & SawStop Certification:'''
:: A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
:: For members who have already completed woodshop orientation and are interested in the SawStop only, there is a separate class once per month on Thursday evenings.
::Sign up for upcoming classes on Meetup! [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']


===Training ===
: A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
:If you need help with a tool or technique, use the #wood-shop channel on [[How To Slack|Slack]]
:To help out in the Wood Shop Area, contact Cap'n Mat on Slack.


===Tips===
:{{Template:Classes}}
Links to external sites:
:'''[https://powermatic.com/manuals POWERMATIC MANUALS]'''
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking Our wood working-related books]''' — on LibraryThing.com


<br>
==PPM Training==
{{Template:Historical}}
:If you need help with a tool or technique, use the #wood-shop channel on&nbsp;Slack.
'''&bull;''' [[Introduction to Woodworking‏‎]] (14:45, 15 November 2015)
:'''[[Woodworking terminology]]'''
:[[Introduction to Woodworking|'''Introduction to Woodworking‏‎''']]


'''&bull;''' [[Woodworking terminology‏‎]]
==Tips==
'''Links to external sites:'''
:'''[https://powermatic.com/manuals POWERMATIC MANUALS]''' — on powermatic.com
:'''[https://www.woodcraft.com/blogs/wood/toxic-woods.. Toxic Woods]''' — on WOODCRAFT.com


==Equipment Lists==
==Equipment Lists==
Line 184: Line 189:
===POWERMATIC Equipment List===
===POWERMATIC Equipment List===
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
| style="vertical-align:middle;" |Picture
|Item
|Item
|Manufacturer
|Model Number
|Model Number
|Power<br>Requirements
|Power<br>Requirements
| Reference<br>Materials
|Resources
|Training<br>Video Link
|-
|-
|[[File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|center|frameless|150x150px]]
|[[File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|center|frameless|150x150px]]
|<br>'''Woodturning Lathe,'''  
|<br>'''Woodturning Lathe,'''  
'''18" extension, swing away tail stock,<br>ONEWAY bowl chuck'''<br>
'''18" extension, swing away tail stock,<br>ONEWAY bowl chuck'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]<br>
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC<br>3520B
|POWERMATIC 3520B
|Single Phase,  
|Single Phase,  
220V,&nbsp;60Hz,&nbsp;6.2A
220V,&nbsp;60Hz,&nbsp;6.2A
|[https://s3.amazonaws.com/jpw-assets/1/b/8/2/1b82ad72ffa4bfbe3be47b5c32268210eaf6b0b9_1352001_man_en.pdf '''Operating Instructions and Parts Manual''']
|[https://s3.amazonaws.com/jpw-assets/1/b/8/2/1b82ad72ffa4bfbe3be47b5c32268210eaf6b0b9_1352001_man_en.pdf '''Operating Instructions<br>and Parts Manual''']
|
|-
|[[File:POWERMATIC bandsaw big.jpg|alt=PWBS-14 POWERMATIC bandsaw|center|frameless|150x150px]]
|'''14" Woodworking Band Saw,'''
'''rip and cross-cut fences, <br>5"&nbsp;riser'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|POWERMATIC<br>PWBS&#8209;14
|Single Phase,
115V, 60Hz, 11A
|'''[https://s3.amazonaws.com/jpw-assets/7/5/7/b/757bf184f70226a8e2aa6c502c51c213b78ecac4_1791216k_man_en.pdf Operating Instructions<br>and Parts Manual]'''
|-
|-
|[[File:POWERMATIC planer.jpg|alt=15HH POWERMATIC planer|center|frameless|150x150px]]
|[[File:POWERMATIC planer.jpg|alt=15HH POWERMATIC planer|center|frameless|150x150px]]
Line 208: Line 218:
|'''15-inch Planer,'''  
|'''15-inch Planer,'''  
'''4"&nbsp;Dust&nbsp;Port'''<br>
'''4"&nbsp;Dust&nbsp;Port'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC<br>15HH
|POWERMATIC 15HH
|Single Phase,  
|Single Phase,  
230V, 60Hz, 15A
230V, 60Hz, 15A
|'''[https://s3.amazonaws.com/jpw-assets/e/5/6/7/e5672c0ae446a5b84cf56a662cc41763b8c40945_1791213_man_en.pdf Operating Instructions and Parts Manual]'''
|'''[https://s3.amazonaws.com/jpw-assets/e/5/6/7/e5672c0ae446a5b84cf56a662cc41763b8c40945_1791213_man_en.pdf Operating Instructions<br>and Parts Manual]'''
|
|-
|[[File:POWERMATIC bandsaw big.jpg|alt=PWBS-14 POWERMATIC bandsaw|center|frameless|150x150px]]
|'''14" Woodworking Band Saw,'''
'''rip and cross-cut fences, <br>5"&nbsp;riser'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC PWBS&#8209;14
|Single Phase,
115V, 60Hz, 11A
|'''[https://s3.amazonaws.com/jpw-assets/7/5/7/b/757bf184f70226a8e2aa6c502c51c213b78ecac4_1791216k_man_en.pdf Operating Instructions and Parts Manual]'''
|
|-
|-
|
|
|
|
|
|
Line 237: Line 232:
|
|
|'''6" Belt/<br>12" Disc<br>Combination Sander'''<br>
|'''6" Belt/<br>12" Disc<br>Combination Sander'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC<br>30B
|POWERMATIC 30B
|3-phase
|3-phase
|[https://www.ereplacementparts.com/powermatic-30b-combination-belt-and-disc-sander-parts-c-32549_32557_289690.html '''Replacement Parts''']
|[https://www.ereplacementparts.com/powermatic-30b-combination-belt-and-disc-sander-parts-c-32549_32557_289690.html '''Replacement Parts''']
|
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|
|
|
|
|
|
Line 252: Line 243:
|
|
|}
|}
<gallery widths="200" heights="125">
<gallery widths="200" heights="125">
File:Lathe chuck.jpg|alt=Lathe chuck|'''Lathe chuck'''
File:Lathe chuck.jpg|'''Lathe chuck'''
File:Lathe tools.jpg|alt=Lathe tools|'''Lathe tools'''
</gallery>
</gallery>


===Sharpening and Sanding Equipment List===
===Sharpening and Sanding Equipment List ===
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
| style="vertical-align:middle;" |Picture
|Item
|Item
|Manufacturer
|Manufacturer  
|Model&nbsp;Number
|Model&nbsp;Number
|Reference<br>Materials
|-
|-
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]]
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]]
|'''8" bench grinder, blue&nbsp;and&nbsp;white grinding stones,<br>Wolverine and Veritas sharpening devices,<br>buffing wheel and&nbsp;compounds'''
|'''8" bench grinder, blue&nbsp;and&nbsp;white grinding stones,<br>Wolverine and Veritas sharpening devices,<br>buffing wheel and&nbsp;compounds'''
|[https://jettools.com/woodworking/ JET]
|JET
|JET
[https://jettools.com/726101 JWBG&#8209;8&nbsp;]
|JWBG&#8209;8&nbsp;
|[[File:Wolverine Dressing Jig Instructions.pdf|alt=Wolverine Dressing Jig Instructions|center|frameless|129x129px]]
|-
|
|'''variable speed buffer<br>and buffing wheels'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
|DeWALT
DWP849
|
|-
|-
|[[File:Granite block.jpg|alt=Granite block|center|frameless|133x133px]]
|'''precision ground granite block, 12"x18"x3"'''
|
|
|'''sanding&nbsp;belts, disks and sheets'''
|[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]]
|3M
|
|
|-
|-
Line 291: Line 270:
|
|
|
|
|-
|
|
|'''variable speed buffer<br>and buffing wheels'''
|DeWALT
|DWP849
|-
|-
|[[File:Granite block.jpg|alt=Granite block|center|frameless|133x133px]]
|'''precision ground granite block, 12"x18"x3"'''
|
|
|
|'''sanding&nbsp;belts, disks'''
'''and sheets'''
|3M
|
|
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|
|
|
|
|
Line 308: Line 290:
:'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''
:'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''


===Wood Shop Equipment List===
===Wood Shop Equipment List ===
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
| style="vertical-align:middle;" |Picture
|Item
|Item
|Manufacturer
|Manufacturer / <br>Model&nbsp;Number
|Model&nbsp;Number
|Power <br> Requirements
|Power<br>Requirements
|Reference<br>Materials
|-
|[[File:JET Jointer.jpg|alt=JET Jointer|center|frameless|JET Jointer|150x150px]]
|'''8" Jointer with Shelix cutting&nbsp;head'''
|[https://jettools.com/woodworking/ JET]
|[https://jettools.com/718200k JJ-8CS]
|single phase,
110 Volts,
 
15 Amps,
 
60HZ
|
|-
|-
|[[File:Miter saw with new dust hood.jpg|alt=Miter saw with new dust hood|center|frameless|133x133px]]
|[[File:Miter saw with new dust hood.jpg|alt=Miter saw with new dust hood|center|frameless|133x133px]]
|'''12" Sliding Compound'''  
|'''12" Sliding Compound'''  
'''Miter Saw, dust&nbsp;hood & RIGID&nbsp;vacuum'''
'''Miter Saw'''<br>
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
[[File:Level 2 badge.png|alt=Level 2 badge|left|frameless|45x45px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_2_badge.png]]<br>
|DeWALT DW708
|DeWALT
DW708
|single phase,  
|single phase,  
110 Volts,  
110 Volts,  
Line 341: Line 310:


60HZ
60HZ
|
|-
|-
|[[File:WORK SHARP sharpener.jpg|alt=WORK SHARP sharpener|center|frameless|150x150px]]
|'''wood tool sharpener'''
|WORK SHARP
|[https://www.worksharptools.com/shop/woodworking/woodworking-sharpener/woodworking-tool-sharpener-ws3000/ WS3000]
|single phase,
110 Volts,
2 Amps,
60HZ
|
|
|-
|'''<br>'''
|[[File:DELTA Router Table.jpg|alt=DELTA Router Table|center|frameless|150x150px]]
'''1-1/2 HP Shaper<br>Polar Bear Series<br>(2014)
|'''Router and Shaper with bits on rolling carts'''
<br>
|[https://deltamachinery.com/products/ DELTA]
|Grizzly
|?
G1035P
|single phase,  
|single phase,  
110 Volts,  
120V / 240V,  


9 Amps,  
12 Amps at 120V,  


60HZ
60HZ
|
|-
|-
|
|[[File:JET Jointer.jpg|center|frameless|JET Jointer|150x150px]]
|'''Floor drill press'''
|'''8" Jointer, 2 HP Motor, '''
|[https://www.portercable.com/products/power-tools/woodworking-tools PORTER-CABLE]
'''with SHELIX cutting&nbsp;head'''
|?
|JET
JJ-8CS
|single phase,  
|single phase,  
110 Volts,  
110 Volts,  


8 Amps,  
15 Amps,  


60HZ
60HZ
|
|-
|-
|
|[[File:WORK SHARP sharpener.jpg|alt=WORK SHARP sharpener|center|frameless|150x150px]]
|'''6" Disk 4" Belt Sander'''
|'''wood tool sharpener'''
|[https://wenproducts.com/collections/power-tools WEN]
|WORK SHARP
|[https://wenproducts.com/products/wen-6502t-4-3-amp-4-x-36-in-belt-and-6-in-disc-sander 6502T]
WS3000
|single phase,  
|single phase,  
110 Volts,  
110 Volts,  


4.3 Amps,  
2 Amps,  


60HZ
60HZ
|
|-
|-
|
|[[File:DELTA Router Table.jpg|alt=DELTA Router Table|center|frameless|150x150px]]
|'''1" x 30" belt & 5"&nbsp;disk&nbsp;sander'''
|'''Router and Shaper'''
|Dremel
'''with bits on&nbsp;rolling&nbsp;carts'''
|?
|DELTA
|single phase,  
|single phase,  
110 Volts,  
110 Volts,  


3 Amps,  
9 Amps,  


60HZ
60HZ
|
|-
|-
|
|
|
|
|
|
Line 413: Line 366:
|'''AIR FILTRATION SYSTEM'''
|'''AIR FILTRATION SYSTEM'''
'''with remote'''
'''with remote'''
|[https://www.baileigh.com/ BAILEIGH]
| BAILEIGH
|[https://www.baileigh.com/air-filtration-system-afs-2400 AFS-2400]
AFS-2400
|single phase,  
|single phase,  
110 Volts,  
110 Volts,  
Line 421: Line 374:


60HZ
60HZ
|
|-
|-
|[[File:Box fan.jpg|alt=Box fan|center|frameless|140x140px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Box_fan.jpg]]
|[[File:Box fan.jpg|alt=Box fan|center|frameless|140x140px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Box_fan.jpg]]
Line 427: Line 379:
'''20", 3-speed'''
'''20", 3-speed'''
|LASKO
|LASKO
|N/A
|
|
|
|-
|-
|
|
|'''Dust Collector<br>1.5HP 6" inlet'''
|[https://deltamachinery.com/products/ DELTA]
|?
|
|
|
|
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|-
|
|
|'''Dust Collector<br>1.5HP 6" inlet'''
|DELTA
|
|
|
|
|}
<gallery widths="200" heights="125">
File:Cable management.jpg|alt=Wood Shop Cable Management|'''Cable Management<br>by Nick Hopkins<br>(11/06/22)'''
File:AFS-2400 nameplate.jpg|alt=AFS-2400 nameplate|'''AFS-2400 nameplate'''
File:Bench grinder.jpg|alt=Bench grinder|'''Bench grinder'''
File:JET Jointer nameplate.jpg|alt=JET Jointer nameplate|'''JET Jointer nameplate'''     
</gallery>
===FESTOOL Equipment List — Level 3 Tools===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Model<br>Number
|Owner
|-
|[[File:Festool Track Saw.jpeg|alt=Festool Track Saw|center|frameless|150x150px]]
|'''Track Saw'''<br>
[[File:Level 3 badge.png|left|frameless|55x55px]]
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
|FESTOOL
TS 55 EQ
|'''John Norton'''
|-
|[[File:Festool Half Sheet Sander.jpeg|alt=Festool Half Sheet Sander|center|frameless|150x150px]]
|'''Sander&nbsp;(Half&nbsp;Sheet)'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
|FESTOOL
RS 2-E-Plus
|'''John Norton'''
|-
|[[File:Festool Orbital Sander.jpeg|alt=Festool Orbital Sander|center|frameless|150x150px]]
|'''Sander&nbsp;(Orbital)'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
|FESTOOL
ETS 150/5 EQ-Plus
|'''John Norton'''
|-
|[[File:Festool Dust Extractor.jpeg|alt=Festool Dust Extractor|center|frameless|150x150px]]
|'''Dust Collector'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
|FESTOOL
CLEANTEC&nbsp;CT&nbsp;22&nbsp;E
|'''John Norton'''
|-
|
|'''Multifunction Table'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px]]
|[[File:Festool-logo.min.png|alt=Festool-logo.min|left|frameless|91x91px]]
|FESTOOL
1080
|'''John Norton'''
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|
|
|
|
|
|
|
|}
|}
<gallery widths="200" heights="125">
File:Festool Track Saw in Systainer.jpeg|alt=Festool Track Saw in Systainer|'''FESTOOL<br>Track Saw,<br>in Systainer'''
File:Festool Orbital Sander in Systainer.jpeg|alt=Festool Orbital Sander in Systainer|'''FESTOOL<br>Orbital Sander,<br>in Systainer'''
File:Festool Half Sheet Sander in Systainer.jpeg|alt=Festool Half Sheet Sander in Systainer|'''FESTOOL<br>Half Sheet Sander,<br>in Systainer'''
</gallery>


===Power Tools===
===Power Tools===
'''<nowiki/>'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly'''
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
| style="vertical-align:middle;" |Picture
|Item
|Item
| Manufacturer
|Manufacturer / <br>Model Number
|Model<br>Number
| Resources
|Reference<br>Materials
|-
|-
|[[File:Compact Router.jpg|alt=Milwaukee Compact Router|center|frameless|120x120px]]
|[[File:Compact Router.jpg|alt=Milwaukee Compact Router|center|frameless|120x120px]]
|'''COMPACT ROUTER'''  
|'''COMPACT ROUTER'''  
'''M18 FUEL'''
'''M18 FUEL'''
|[[File:2560px-Milwaukee Logo.svg.png|alt=Milwaukee Logo|left|frameless|100x100px]]
|Milwaukee
|Milwaukee  
2723-20
[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2723-20 2723-20]
|[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2723-20 2723-20]
|[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
|-
|[[File:JIG SAW Milwaukee.jpg|alt=JIG SAW Milwaukee|center|frameless|130x130px]]
|'''JIG SAW'''
'''M18 FUEL'''
 
'''D-Handle'''
|[[File:2560px-Milwaukee Logo.svg.png|alt=Milwaukee Logo|left|frameless|100x100px]]
|Milwaukee
[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2737-20 2737-20]
|[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
|-
|-
|[[File:Makita Circular Saw.jpg|alt=Makita Circular Saw|center|frameless|120x120px]]
|[[File:Makita Circular Saw.jpg|alt=Makita Circular Saw|center|frameless|120x120px]]
|'''Circular Saw,'''  
|'''Circular Saw,'''  
'''185mm'''
'''185mm'''
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
|Makita
|Makita
[https://www.makitatools.com/products/details/5007NB 5007NB]
5007NB
|
|[https://www.makitatools.com/products/details/5007NB 5007NB]
[https://www.makitatools.com/products/details/5007NB product detail on makita.com]
|-
|-
|[[File:Makita Router 3601B.jpg|alt=Makita Router 3601B|center|frameless|120x120px]]
|[[File:Makita Router 3601B.jpg|alt=Makita Router 3601B|center|frameless|120x120px]]
|'''Router'''
|'''Router'''
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
|Makita
|Makita
3601B
3601B
Line 561: Line 430:
|[[File:DeWALT sawsall.jpg|alt=DeWALT sawsall|center|frameless|120x120px]]
|[[File:DeWALT sawsall.jpg|alt=DeWALT sawsall|center|frameless|120x120px]]
|'''RECIPROCATING SAW'''
|'''RECIPROCATING SAW'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
|DeWALT  
|DeWALT  
DW304P
DW304P
Line 568: Line 436:
|[[File:DeWALT jigsaw.jpg|alt=DeWALT jigsaw|center|frameless|120x120px]]
|[[File:DeWALT jigsaw.jpg|alt=DeWALT jigsaw|center|frameless|120x120px]]
|'''JIG SAW'''
|'''JIG SAW'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
|DeWALT  
|DeWALT  
DW331
DW331
Line 575: Line 442:
|[[File:BOSCH jigsaw 1590EVS.jpg|alt=BOSCH jigsaw 1590EVS|center|frameless|120x120px]]
|[[File:BOSCH jigsaw 1590EVS.jpg|alt=BOSCH jigsaw 1590EVS|center|frameless|120x120px]]
|'''Jig Saw'''
|'''Jig Saw'''
|BOSCH
|BOSCH
|BOSCH
1590EVS
1590EVS
|
|
|-
|-
|[[File:AIR NAILER.jpg|alt=AIR NAILER|center|frameless|104x104px|AIR NAILER]]
|[[File:AIR NAILER.jpg|center|frameless|104x104px|AIR NAILER]]
|'''AIR NAILER/'''
|'''AIR NAILER/'''
'''STAPLER'''
'''STAPLER'''
|CENTRAL PNEUMATIC
|CENTRAL PNEUMATIC
64269
|[https://www.harborfreight.com/18-gauge-2-in-1-air-nailerstapler-68019.html 64269]
|[https://www.harborfreight.com/18-gauge-2-in-1-air-nailerstapler-68019.html 64269]
|
|-
|-
|[[File:Biscuit Joiner In Red Case.jpg|alt=Biscuit Joiner In Red Case|center|frameless|150x150px]]
|[[File:Biscuit Joiner In Red Case.jpg|alt=Biscuit Joiner In Red Case|center|frameless|150x150px]]
|'''Biscuit'''  
|<br>'''Biscuit Joiner'''<br><br>
'''Joiner'''
|Craftsman
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|Craftsman
|
|-
|-
|
|
|'''Circular'''
'''Saw'''
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|Craftsman
|
|
|-
|
|
|'''Belt Sander'''
'''(handheld)'''
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|Craftsman
|
|
|}
=== Sanders ===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer / <br>Model Number
| Resources
|-
|-
|[[File:Sander Mouse.jpg|alt=Sander Mouse|center|frameless|133x133px]]
|
|
|'''Belt Sander'''
'''Mouse Sander/Polisher'''
'''(handheld)'''
|BLACK&DECKER / 
|[[File:Logo RYOBI.png|alt=Logo RYOBI|left|frameless|65x65px]]
FMS50
|RYOBI
|
|
|-
|-
|[[File:Sander PORTER-CABLE.jpg|alt=Sander PORTER-CABLE|center|frameless|133x133px]]
|[[File:Sander PORTER-CABLE.jpg|alt=Sander PORTER-CABLE|center|frameless|133x133px]]
|'''Orbital Sander'''
|'''Orbital Sander'''
|PORTER-CABLE
|PORTER-CABLE /
|Quicksand
Quicksand
|
|-
|[[File:Sander Mouse.jpg|alt=Sander Mouse|center|frameless|133x133px]]
|
'''Mouse Sander/Polisher'''
|[[File:Logo BLACK&DECKER.png|left|frameless]]
|BLACK&DECKER
FMS50
|
|
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|
|
|
|
|
Line 636: Line 491:
|}
|}


=== Clamps===
===Clamps===
{| class="wikitable"
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Item
| style="vertical-align:middle;" |Item
|Manufacturer
|Manufacturer
|
|Model
|Quantity
|Quantity
|Price Each
|Owner
|Owner
|-
|-
Line 650: Line 504:
|[https://www.rockler.com/wooden-handscrew-clamps-clamps Wooden Handscrew Clamps]
|[https://www.rockler.com/wooden-handscrew-clamps-clamps Wooden Handscrew Clamps]
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$14</p>
|PPM
|PPM
|-
|-
|'''8" Quick Clamp'''
|'''8" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
|[https://www.irwintools.com/products/hand-tools Irwin]
| Quick Grip
Quick Grip
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$10</p>
|PPM
|PPM
|-
|-
|'''12" Quick Clamp'''
|'''12" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
|[https://www.irwintools.com/products/hand-tools Irwin]
| Quick Grip
Quick Grip
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$12</p>
|PPM
|PPM
|-
|-
|'''36" Quick Clamp'''
|'''36" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
|[https://www.irwintools.com/products/hand-tools Irwin]
|Quick Grip
Quick Grip
|<p style="text-align:left;">1</p>
|<p style="text-align:left;">1</p>
|<p style="text-align:right;">$36</p>
|'''Bill Epperson'''
|'''Bill Epperson'''
|-
|-
|'''30" Bessey Pipe Bar Clamp'''
|'''30" Pipe Bar Clamp'''
|
|Bessey
|
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|<p style="text-align:left;">4</p>
|<p style="text-align:left;">4</p>
|<p style="text-align:right;">$20</p>
|'''Bill Epperson'''
|'''Bill Epperson'''
|-
|-
|'''48" Bessey Pipe Bar Clamp'''
|'''48" Pipe Bar Clamp'''
|
|Bessey
|
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$20</p>
|'''Bill Epperson'''
|'''Bill Epperson'''
|-
|-
|'''60" Bessey Pipe Bar Clamp'''
|'''60" Pipe Bar Clamp'''
|
|Bessey
|
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$20</p>
|'''Bill Epperson'''
|'''Bill Epperson'''
|-
|-
Line 699: Line 549:
|CABINET MASTER 8036
|CABINET MASTER 8036
|<p style="text-align:left;">5</p>
|<p style="text-align:left;">5</p>
|<p style="text-align:right;">$50</p>
|PPM
|PPM
|-
|-
Line 706: Line 555:
|
|
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$3</p>
|'''Bill Epperson'''
|'''Bill Epperson'''
|-
|-
Line 713: Line 561:
|
|
|<p style="text-align:left;">0</p>
|<p style="text-align:left;">0</p>
|
| PPM
|PPM
|-
|-
|'''18" Quick Release Bar Clamp'''
|'''18" Quick Release Bar Clamp'''
Line 720: Line 567:
|
|
|<p style="text-align:left;">0</p>
|<p style="text-align:left;">0</p>
|
| PPM
|PPM
|-
|-
|'''24" Quick Release Bar Clamp'''
|'''24" Quick Release Bar Clamp'''
Line 727: Line 573:
|
|
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$6</p>
| PPM
|PPM
|-
|-
|'''30" Quick Release Bar Clamp'''
|'''30" Quick Release Bar Clamp'''
Line 734: Line 579:
|
|
|<p style="text-align:left;">0</p>
|<p style="text-align:left;">0</p>
|
| PPM
|PPM
|-
|-
|'''36" Quick Release Bar Clamp'''
|'''36" Quick Release Bar Clamp'''
Line 741: Line 585:
|[https://www.harborfreight.com/36-in-aluminum-bar-clamp-60539.html ITEM 60539]
|[https://www.harborfreight.com/36-in-aluminum-bar-clamp-60539.html ITEM 60539]
|<p style="text-align:left;">6</p>
|<p style="text-align:left;">6</p>
|<p style="text-align:right;">$9</p>
| PPM
| PPM<br>[https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2021_Donations (donated&nbsp;by David&nbsp;Wasmer,&nbsp;Sr.)]
|-
|-
|'''60" Quick Release Bar Clamp'''
|'''60" Quick Release Bar Clamp'''
Line 748: Line 591:
|[https://www.harborfreight.com/60-in-aluminum-f-style-bar-clamp-60673.html ITEM 60673]
|[https://www.harborfreight.com/60-in-aluminum-f-style-bar-clamp-60673.html ITEM 60673]
|<p style="text-align:left;">2</p>
|<p style="text-align:left;">2</p>
|<p style="text-align:right;">$18</p>
|PPM
|PPM
|-
|-
Line 755: Line 597:
|[https://www.harborfreight.com/50-inch-clamp-and-cut-edge-guide-66581.html ITEM 66581]
|[https://www.harborfreight.com/50-inch-clamp-and-cut-edge-guide-66581.html ITEM 66581]
|<p style="text-align:left;">1</p>
|<p style="text-align:left;">1</p>
|<p style="text-align:right;">$20</p>
| PPM
| PPM
|-
|-
Line 762: Line 603:
|
|
|<p style="text-align:left;">0</p>
|<p style="text-align:left;">0</p>
|
|PPM
|PPM
|-
|-
Line 769: Line 609:
|
|
|<p style="text-align:left;">6</p>
|<p style="text-align:left;">6</p>
|<p style="text-align:right;">$4</p>
|PPM
|PPM
|-
|-
Line 776: Line 615:
|
|
|<p style="text-align:left;">0</p>
|<p style="text-align:left;">0</p>
|
|PPM
|PPM
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|
|
|
|
|
Line 787: Line 624:
|}
|}


===Hand Tools===
 
===Hand Tools ===
{| class="wikitable"
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#42B649; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
| style="vertical-align:middle;" |Picture
|Item
|Item
Line 808: Line 646:
|'''Forstner bit set'''  
|'''Forstner bit set'''  
'''(16 bits)'''
'''(16 bits)'''
|
|PPM
|-
|
|
|
|
|-
|
|'''Dead Blow Hammer&nbsp;'''
|
|
|PPM
|PPM
Line 817: Line 665:
|}
|}


:'''Wood Shop Area''' hand tools should be marked with <span style="color:#42B649">'''green'''</span> tape or paint or powder coating.
:
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
 
===Equipment Reservations ===
:Please remember to check for reservations before beginning your project. Some members drive in from Denver, Pueblo, or Falcon to use the equipment they have reserved. If your job is running at the time of their reservation, you are expected to pause and remove your project.
:[https://pikespeakmakerspace.org/reserve '''Make a Reservation''']
[[Donations Received|'''Donations Received''']]


[[Wish List#Wood Shop|'''Wish List''']]
:☐ Return all tools to their proper location after use. This rule applies to all areas of our&nbsp;Makerspace.
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.


==Benefits==
==Benefits==
Line 832: Line 673:


==Donate for Materials and Consumables==
==Donate for Materials and Consumables==
Donated materials are available for member use, but should be compensated for by making a donation through one of the following methods:
Donated materials are available for member use, but should be compensated for by making a donation through the Optix&nbsp;app.
:'''Donate via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box.'''
==Related Pages==
Links to related PPM Wiki pages:
 
:[[Wood_Shop_--_SawStop|<span style="color:#FFFFFF; background:#42B649">&nbsp;&nbsp;'''Wood Shop — SawStop'''&nbsp;&nbsp;</span>]]
:[[CNC|<span style="color:#FFFFFF; background:#2B78BE">&nbsp;&nbsp;'''CNC Router Table'''&nbsp;&nbsp;</span>]]
:[[Vented Room|<span style="color:#FFFFFF; background:#3EC0F0">&nbsp;&nbsp;'''Vented Room'''&nbsp;&nbsp;</span>]]
:[[Metal_Shop|<span style="color:#FFFFFF; background:#EB4F9C">&nbsp;&nbsp;'''Metal Shop'''&nbsp;&nbsp;</span>]]
:[[Shed|<span style="color:#000000; background:#D7D4EB">&nbsp;&nbsp;'''Shed'''&nbsp;&nbsp;</span>]]
 
:'''[[Autodesk Fusion Tips]]'''
:'''[[VCarve Tips]]'''
:'''[[Inkscape Tips]]'''
:'''[[QR Codes]]'''


==Hand-Curated Links ==
==Additional Help==
Links to member-recommended external sites:
Use the PPM Slack channel #wood-shop
:'''[https://colowood.com/index.php Colorado Woodworkers' Guild]''' — learn and share information about woodworking
:'''[https://www.printables.com/@Festool/models FESTOOL 3D Models]''' — on Printables.com
:'''[https://www.youtube.com/watch?v=BGnVt29NEG8 Inkscape Tutorial, For Engineers And Shaper Origin Users]''' — BodgedButWorks on YouTube
:'''[https://www.youtube.com/user/StumpyNubsWorkshop/videos Stumpy Nubs Woodshop]''' — on YouTube
:'''[https://owwm.org/ Old Woodworking Machines (OWWM)]'''


==For Additional Help==
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
:Use the PPM Slack channel #wood-shop
:[[How To Slack#PPM Channel  Names and Descriptions|'''List of all PPM Slack channels''']]
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.


{{Template:Footer}}
{{Template:Footer}}
{{Template:Ideas into reality}}
<hr style="height:2.5px; background:#3DA942;">
<p style="padding:0.2em 0.4em; background:#42B649; color:#FFFFFF; font-size:15%;"> &nbsp; </p>
<!--Bandsaw Tablesaw Woodshop-->

Latest revision as of 17:52, 25 August 2026

All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.

Links to related PPM Wiki pages:

  Wood Shop — SawStop table saw  
  Wood Shop — Festool power tools  


Level 3 badge used at Pikes Peak Makerspace
PPM TRAINING & CERTIFICATION REQUIRED

The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of both Level 2 and Level 3 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.


Wood Shop Policy, Safety, and Orientation

All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.

Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.

Emergency Safety - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of emergency.

  • By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your responsibility.
  • Damage to tools, equipment, the shop itself caused by your actions is solely your responsibility.

Impairment - The use of the Wood Shop equipment requires you to be alert, attentive and focused.

  • Do not use the Wood Shop, any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
  • Likewise, ensure that you are well-rested and alert.

Personal Protective Equipment (PPE)

  • Safety Glasses - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop. 
    • Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools. (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most prescription glasses are not impact resistant or provide side protection. If you use prescription glasses, then put an ANSI Z87-1 goggle over them.
  • Hearing Protection - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood Shop.
    • There are two types of hearing protection available at PPM:
    • Soft foam earplugs. To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good seal.
    • Ear muffs. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
  • Respiratory Protection - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust collector).
  • Shoes - Closed toe shoes are required. If working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if materials or tools are dropped.
  • Gloves - Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
  • Hair and Clothing - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is secured.
  • Jewelry - Remove rings, bracelets and any other jewelry that could get caught when operating equipment.

Hazards

The following are a list of hazards that should be considered while working in the Wood Shop.

  • Wood Dust - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
  • Noise - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
  • Electrical Hazards - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on #red-tag-issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
  • Machine Maintenance - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on #red-tag-issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
  • Fire and Explosion - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, and sawdust, (and also paints, oils finishes, solvents, and other flammable liquids). Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.
  • Electrical panels must be kept clear.
  • Fire extinguishers, first aid kits, eye washes stations, and exit routes must always be accessible.
  • It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of equipment.

Reporting Issues

Injuries

If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment.

Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:

  • Call 719-445-MAKE(6253) and leave a detailed message including:

   ☐ Your name and phone number

   ☐ Who was injured and their phone number

   ☐ Describe the injury, part of body

   ☐ Detail what type of medical attention was sought

   ☐ Describe how the accident occurred

   ☐ Include the equipment that was being used

  • Send a direct message to our Executive Director on Slack
  • Use the form on the PPM website to Contact Us
    • Include all the same information listed in the checklist above

Equipment Issues

Red-Tag Equipment – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tag-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Red Tags
• Any damage to tools or broken equipment MUST be reported in a direct message to an Area Deputy or our Director.
• Use a Red Tag to designate the broken equipment.
• Additionally, report the issue in our Slack #red-tag-issues channel.

Equipment Information

Be knowledgeable about the equipment that you are using.
Laminated Placards
  • There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training ("PPM Jointer Safety and Operations", for example)
  • More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.
Getting Help
  • Use the #wood-shop channel on Slack to get help with specific equipment.
  • Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.

Dust Collection and Air Handler

Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.

  • Fine particulate matter is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
  • Fire Danger – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, and electrical boxes. Dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housings, and other sources.
  • Annoyance – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean environments.

Reclaimed Materials Usage

Use Metal Detector

Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.

Upcycled Wood

Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.

Here are some resources about reclaimed wood:

https://earth911.com/health/how-to-safely-use-pallet-wood/

https://rockinwoodusa.com/is-reclaimed-wood-safe/

Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.

Acceptable Materials

The equipment in the Wood Shop is configured with blades and bits for working with the following materials:

  • Solid wood
  • Plywood
  • MDF (Medium Density Fiberboard)
  • Upcycled/recycled wood (see caution on use above)

Banned Materials

  • Metals
  • Composite decking material ("Trex", for example - requires a special blade and will quickly dull standard woodworking blades)

Plastics & Resin

It is important to research all materials before cutting and take precautions to ensure there are no harmful fumes released and no chips blocking the tool's functionality or the dust collection ability.

Paint or Solvents

Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is bothersome.

  • Use the ventilated room, outdoors, or other location for applying paints or solvent-based finishes.

Check-in/ Check-out form

All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.

Project Storage

Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to removal.

All projects left in the woodshop must be labeled with green Project Storage tags.

Clean-up

If you do not have time to clean up, you do not have time to build it.

Woodworking projects tend to have 3 parts:

“Plan it. Build it. Clean up after it.”
☐ Clean up the area and equipment that you used.
☐ All equipment should be ready for the next member to use right away.
☐ Return all hand tools to their proper location after use. If you don't know where it goes, ask an Area Deputy. This rule applies to all areas of our Makerspace.
☐ Go to the Cleaning Sequence sheets hanging on the Wood Shop door:
Cleaning Sequence (Required)

To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip chart.

If you have comments about the cleaning sequence, leave a note on the Check-out form.

Classes

Woodshop Orientation & SawStop Certification:

A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
Browse and Pay for PPM Classes

PPM Training

If you need help with a tool or technique, use the #wood-shop channel on Slack.
Woodworking terminology
Introduction to Woodworking‏‎

Tips

Links to external sites:

POWERMATIC MANUALS — on powermatic.com
Toxic Woods — on WOODCRAFT.com

Equipment Lists

POWERMATIC Equipment List

Picture Item Model Number Power
Requirements 		Resources
3520B POWERMATIC lathe
Woodturning Lathe,

18" extension, swing away tail stock,
ONEWAY bowl chuck

Level 3 badge

 POWERMATIC
3520B 		Single Phase,

220V, 60Hz, 6.2A

Operating Instructions
and Parts Manual
PWBS-14 POWERMATIC bandsaw
 14" Woodworking Band Saw,

rip and cross-cut fences,
5" riser

Level 3 badge
 POWERMATIC
PWBS‑14 		Single Phase,

115V, 60Hz, 11A

Operating Instructions
and Parts Manual
15HH POWERMATIC planer
 15-inch Planer,

4" Dust Port

Level 3 badge
 POWERMATIC
15HH 		Single Phase,

230V, 60Hz, 15A

Operating Instructions
and Parts Manual
6" Belt/
12" Disc
Combination Sander
Level 3 badge
 POWERMATIC
30B 		3-phase Replacement Parts
  • Lathe chuck
    Lathe chuck

Sharpening and Sanding Equipment List

Picture Item Manufacturer Model Number
Grinder station
 8" bench grinder, blue and white grinding stones,
Wolverine and Veritas sharpening devices,
buffing wheel and compounds 		JET JWBG‑8 
Granite block
 precision ground granite block, 12"x18"x3"
variable speed buffer
and buffing wheels 		DeWALT DWP849
sanding belts, disks

and sheets

3M
Do not store tools, or anything, on our granite block to avoid damage to its surface.

Wood Shop Equipment List

Picture Item Manufacturer /
Model Number 		Power
Requirements
Miter saw with new dust hood
 12" Sliding Compound

Miter Saw

Level 2 badge

 DeWALT

DW708

single phase,

110 Volts,

13 Amps,

60HZ


1-1/2 HP Shaper
Polar Bear Series
(2014)

Grizzly

G1035P

single phase,

120V / 240V,

12 Amps at 120V,

60HZ

JET Jointer
JET Jointer
 8" Jointer, 2 HP Motor,

with SHELIX cutting head

JET

JJ-8CS

single phase,

110 Volts,

15 Amps,

60HZ

WORK SHARP sharpener
 wood tool sharpener WORK SHARP

WS3000

single phase,

110 Volts,

2 Amps,

60HZ

DELTA Router Table
 Router and Shaper

with bits on rolling carts

DELTA single phase,

110 Volts,

9 Amps,

60HZ

BAYLEIGH AIR FILTRATION SYSTEM
 AIR FILTRATION SYSTEM

with remote

BAILEIGH

AFS-2400

single phase,

110 Volts,

14 Amps,

60HZ

Box fan
 Box fan,

20", 3-speed

LASKO
Dust Collector
1.5HP 6" inlet 		DELTA

Power Tools

Picture Item Manufacturer /
Model Number 		Resources
Milwaukee Compact Router
 COMPACT ROUTER

M18 FUEL

Milwaukee

2723-20

2723-20

OPERATOR'S MANUAL

Makita Circular Saw
 Circular Saw,

185mm

Makita

5007NB

5007NB

product detail on makita.com

Makita Router 3601B
 Router Makita

3601B

INSTRUCTION MANUAL
DeWALT sawsall
 RECIPROCATING SAW DeWALT

DW304P

DeWALT jigsaw
 JIG SAW DeWALT

DW331

BOSCH jigsaw 1590EVS
 Jig Saw BOSCH

1590EVS

AIR NAILER
AIR NAILER
 AIR NAILER/

STAPLER

CENTRAL PNEUMATIC

64269

64269
Biscuit Joiner In Red Case
Biscuit Joiner

 Craftsman Craftsman

Sanders

Picture Item Manufacturer /
Model Number 		Resources
Sander Mouse

Mouse Sander/Polisher

BLACK&DECKER /

FMS50

Sander PORTER-CABLE
 Orbital Sander PORTER-CABLE /

Quicksand

Clamps

Item Manufacturer Model Quantity Owner
6" Wooden Handscrew Clamps ROCKLER Wooden Handscrew Clamps

2

 PPM
8" Quick Clamp Irwin Irwin

Quick Grip

2

 PPM
12" Quick Clamp Irwin Irwin

Quick Grip

2

 PPM
36" Quick Clamp Irwin Irwin

Quick Grip

1

 Bill Epperson
30" Pipe Bar Clamp Bessey BESSEY Tools North America

4

 Bill Epperson
48" Pipe Bar Clamp Bessey BESSEY Tools North America

2

 Bill Epperson
60" Pipe Bar Clamp Bessey BESSEY Tools North America

2

 Bill Epperson
36" Quick Release Steel Bar Clamp Jorgensen CABINET MASTER 8036

5

 PPM
6" Quick Release Bar Clamp

2

 Bill Epperson
12" Quick Release Bar Clamp

0

 PPM
18" Quick Release Bar Clamp

0

 PPM
24" Quick Release Bar Clamp

2

 PPM
30" Quick Release Bar Clamp

0

 PPM
36" Quick Release Bar Clamp ITEM 60539

6

 PPM
60" Quick Release Bar Clamp ITEM 60673

2

 PPM
50" CLAMP & CUT EDGE GUIDE ITEM 66581

1

 PPM
6" Ratcheting Bar Clamp

0

 PPM
12" Ratcheting Bar Clamp

6

 PPM
24" Ratcheting Bar Clamp

0

 PPM


Hand Tools

Picture Item Manufacturer Owner
Wood clamp donation
 Wood Clamps PPM
Ten million dollar stick
 10 Million Dollar Stick PPM
Forstner bit set
 Forstner bit set

(16 bits)

PPM
Dead Blow Hammer  PPM
☐ Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of PPM membership)
Website Benefit Address
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
CO Lumber Specialties 10% discount 3636 Stone Avenue
GENERAL AIR 10% discount 3031 N Nevada Ave.
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street

Donated materials are available for member use, but should be compensated for by making a donation through the Optix app.

Additional Help

Use the PPM Slack channel #wood-shop

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.


Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=Wood_Shop&oldid=23795"