Laser — Epilog Zing: Difference between revisions

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
No edit summary
 
(312 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Level_3_badge.png|alt=|left|frameless|100x100px]]
At Pikes Peak Makerspace (PPM), '''our laser engraver/cutters are the most popular tools in the front part of the building.'''


'''The Laser Engraver/Cutter Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.'''
Our Epilog Zing laser requires a reservation to use.


Additional training is required to use our Level 3 equipment.
<br>
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|90x90px|PPM TRAINING & CERTIFICATION REQUIRED]]


Our Laser Engraver/Cutter Area at Pikes Peak Makerspace consists mostly of Level&nbsp;3&nbsp;equipment.


 
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
<span style="color:#FFFFFF; background:#D81F2B">&nbsp;Laser Area&nbsp;</span> [[Laser#Hand Tools|hand tools]] should be marked with <span style="color:#D81F2B">'''red'''</span> tape or paint.
<br>
<br>
<br>
<br>
<br>
[[File:Laser Area.jpg|alt=Laser Area|thumb|300x300px|<span style="color:#FFFFFF; background:#D81F2B">&nbsp;Laser Area&nbsp;&nbsp;(03/13/22)&nbsp;<br><br></span>]]
{{Template:Contact Us}}
{{Template:Safety}}


==Classes and Training==
<hr style="height:2.5px; background:#D81F2B;">


==='''[[New Member Orientation]]'''===
===Area Captains===
:'''Robbie Cochran''' (Epilog Laser)
:'''Lisa MacNicol''' (BOSSLASER)
:View all '''[https://wiki.pikespeakmakerspace.org/index.php/About_PPM#PPM_Area_Captains PPM Area Captains]'''
===[[Area Captain Duties#Laser|Area Captain Duties]]===
===Classes===
:Pikes Peak Makerspace announces its  [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
===Training===
:'''Robbie Cochran''' (Epilog Laser)
:'''Lisa MacNicol''' (BOSSLASER)
:'''Boss Laser Safety'''
:● NEVER cut PVC (When in doubt, error on the side of caution) 
:● NEVER leave the laser unattended while it is running (Stay in the building)
:● Use only approved materials
:● Leave lid closed for a few moments after your job is completed
:● Avoid using 100% power 
:● Avoid reflective material 
:● Keep work area interior and exterior clean 
:● Keep the exhaust fan and chiller running while the laser is in use 
:● Make sure Zing Laser isn’t running before turning off fan<br>
:ALWAYS ensure the work area interior and exterior is clean before and after your work.
:<br>'''[[LightBurn Tips|Watch these videos on LightBurn BEFORE (BOSSLASER) CLASS!]]'''
:'''[https://www.youtube.com/watch?v=i5NpPInh5Z0&t=5s Pikes Peak Makerspace Boss Laser Intro] -- external link to PPM YouTube channel'''
<br>
<br>
<gallery>
{{Template:Safety}}
File:Boss Laser Orientation class handout.pdf|alt=Boss Laser Orientation class handout|<center>'''Boss Laser Orientation class handout.pdf'''</center>
<br>
</gallery>
<hr style="height:2.5px; background:#D81F2B;">
:Be sure to log your Boss Laser job using the new SIGN-IN SHEET
 
===Common Issues (Boss Laser Orientation)===
:'''Didn’t cut through?'''
 
::It is a good practice to leave the workpiece in position and inspect for through cut before moving it.
:: You can often close the lid, run an additional pass, and get all the way through.


:: You should not start your job until you are confident about your settings by doing multiple tests.
==Classes==


'''Taking too long?'''
{{Template:Classes}}


::Check settings for “flood fill” or “fill shapes individually”. Use the preview feature to know if that will help.
== PPM Training ==
Our Zing laser does not require using our T.E.S.L.A. Access&nbsp;system. (Our BOSSLASER and Thunder&nbsp;Laser do.)


===Events===
===Epilog laser engraver/cutter ===
<gallery>
<gallery widths="200" heights="125">
File:TOSC tour 2021-11-24.jpg|alt=TOSC tour 2021-11-24|<center>TOSC tour<br>2021-11-24</center>
File:Zing Instruction Sheetv3.pdf|'''Zing Instruction Sheetv3.pdf'''
File:TOSC Epilog tour 2021-11-24.jpg|alt=TOSC Epilog tour 2021-11-24|<center>TOSC tour<br>2021-11-24</center>
File:Intro to Laser Cutting.jpeg|alt=Intro to Laser Cutting|<center>Intro to Laser Cutting<br>Manitou Art Center<br>(January 15, 2015)</center>
</gallery>
</gallery>
 
<br>'''DO NOT cut materials with PVC on any of our lasers,''' this will release chlorine gas which&nbsp;is&nbsp;toxic.
===Tips===
:ALWAYS ensure the work area interior and exterior is clean before and after your&nbsp;work.
:'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which is toxic.
:The maximum bed size for vector cutting or raster etching is 16” x 12” or less.
=== For Additional Help===
<br>[[Laser Cutting Material Table|'''Laser Cutting Material Table‏‎''']]
: Use the PPM Slack channel #laser-cutter
<br>[[Laser Cutting Acrylic|'''Laser Cutting Acrylic‏‎''']]
<br>
<br>
{{Template:Historical}}
{{Template:Historical}}
'''&bull;''' [[Introduction to the Zing Laser‏‎]] (15:26, 20 May 2015)
'''[[Introduction to the Zing Laser‏‎]]'''
 
'''&bull;''' [[Laser Cutting Material Table‏‎]] (15:41, 21 May 2015)
 
'''&bull;''' [[Laser Cutting Acrylic‏‎]] (16:31, 24 November 2015)


'''[https://www.timefracture.org/laser.html Homebrew CO<sub>2</sub> Laser Page]''' — by John Doran (Epilog's VP of Engineering)


==Equipment Lists==
==Tips==
:☐ '''"kerf"''' refers to the width of a cut (width of material that is removed).
:☐ The term kerf is also used in woodworking and metalworking (and has the same meaning).


===BOSSLASER===
== Equipment Lists==
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#D81F2B; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model<br>Number'''
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|-
|[[File:BOSS LASER.jpg|alt=BOSS LASER engraver|center|frameless|150x150px]]
|'''Boss 150 Watt'''
'''CO<sub>2</sub> Laser'''<br>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px]]
|[https://www.bosslaser.com Boss]
|[https://www.bosslaser.com/laser-machines/boss-hp-3655 LS-3655]
|<p style="text-align:right;">$20,000</p>
|[https://admin.bosslaser.com/assets/cfcc74b8-ec51-4445-9e87-bc4955308bec Operators Manual]
|PPM
|working (12/28/21)
|
|-
|[[File:BOSS LASER OUTFEED TABLE.jpg|alt=BOSS LASER OUTFEED TABLE|center|frameless|150x150px]]
|'''OUTFEED TABLE'''
|Mike Mike
|
|
|
|PPM
|working (12/28/21)
|
|-
|[[File:Industrial Chiller.jpg|alt=Industrial Chiller|center|frameless|150x150px]]
|'''Industrial Chiller'''
|S&A
|CW&#8209;5000DG
|
|[https://wiki.ehlab.uk/_media/cw-5000_5200_industrial_chiller_maintenance_manual.pdf Maintenance Manual]
|PPM
|working (12/28/21)
|
|-
|[[File:Compressor.jpg|alt=Compressor|center|frameless|150x150px]]
|'''Compressor'''
|
|
|
|
|PPM
|being repaired
(01/22/22)
|
|-
|[[File:BOSS LASER Computer.jpg|alt=BOSS LASER Computer|center|frameless|150x150px]]
|'''Computer'''
|HP
|h8-1117c
|<p style="text-align:right;">$250</p>
|
|PPM
|working (12/28/21)
|
|-
|
|'''27" Monitor'''
|Dell
|
|<p style="text-align:right;">$100</p>
|
|PPM
|working (12/28/21)
|
|-
|
|'''rotary attachment for Boss&nbsp;Laser'''
|
|
|
|
|PPM
|?
|
|-
|'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model<br>Number'''
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|}


===Zing LASER===
===Zing LASER===
{| class="wikitable sortable"
{| class="wikitable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#D81F2B; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#D81F2B; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
| style="vertical-align:middle;" |Picture
|'''Item'''
|Item
|'''Manufacturer'''
|Manufacturer&nbsp;/<br>Model
|'''Model<br>Number'''
|Resources
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|-
|-
|[[File:Zing LASER.jpg|center|frameless|150x150px]]
|[[File:Zing LASER.jpg|center|frameless|150x150px]]
|'''Zing&nbsp;30&nbsp;Watt&nbsp;Laser'''<br>
|'''zing&nbsp;30&nbsp;Watt&nbsp;'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px]]
'''CO<sub>2</sub> Laser'''
|[https://www.epiloglaser.com/ Epilog Laser]
 
|10000 Laser System
'''Cutter/Engraver'''
|<p style="text-align:right;">$5,800</p>
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px]]
|yes, and [https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf online]
|'''Epilog Laser'''
|PPM
10000 Laser System
|working
|
|-
|
|'''Computer'''
|HP
|h8-1117c
|<p style="text-align:right;">$250</p>
|
|PPM
|working
|
|-
|
|
|'''20" Monitor'''
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|Dell
| style="vertical-align:middle;" |
|
|
|<p style="text-align:right;">$100</p>
|
|
|PPM
|working
|
|
|-
|'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model<br>Number'''
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|}
|}


===Equipment Reservations===
*Reserve 24 Hours in Advance to Guarantee Equipment.
*Reservations are given up after 15 minute no show.


===Hand Tools===
'''If you don't have a reservation:'''
:<span style="color:#FFFFFF; background:#D81F2B">&nbsp;Laser Area&nbsp;</span> hand tools should be marked with <span style="color:#D81F2B">'''red'''</span> tape or paint.
*Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.


===[[Donations Received]]===
==PPM Benefits==
{{Member Benefits}}
==PPM Policies ==
'''Materials'''
:'''DO NOT cut materials with PVC on any of our lasers,''' this will release chlorine gas which is toxic.
:'''Avoid reflective material.''' (Avoid cutting or engraving compact discs, for&nbsp;example.)


===[[Wish List#Laser|Wish List]]===
:To donate for "Wood Sheet for Laser" use the Optix app.


==Benefits and Policies==
{{Red Tags}}
{{Member Benefits}}
===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''DO NOT cut materials with PVC on either laser,''' this will release chlorine gas which is toxic.
:'''Avoid reflective material'''
:'''Donate for "Wood Sheet for Laser" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''


=== [[New Member Orientation#Red Tags|Red Tags]] ===
==Related Software==
{{Scrap and Trash}}
'''The dedicated computer in our Zing cutter/engraver area has the following software installed, and more:'''


==Software==
==='''Design Software'''===


===Design Software===
:'''[[Adobe Creative Cloud Tips#Adobe Illustrator Tips|Adobe Illustrator Tips]]'''
:'''[[Adobe Illustrator Tips|Adobe Illustrator]]''' (Windows 10 and Macintosh)
:'''[[Adobe Creative Cloud Tips#Adobe Photoshop Tips|Adobe Photoshop Tips]]'''
:'''[[Adobe Photoshop Tips|Adobe Photoshop]]''' (Windows 10 and Macintosh)
:'''[[Inkscape Tips|Inkscape]]'''
:'''[[Procreate app Tips|Procreate]] ''' (Tips, Training and Meetups)
:'''Microsoft Publisher'''


===Printing Software===
==='''Printing Software'''===
:'''[[LightBurn Tips|LightBurn]]''' (for BOSSLASER)
:'''Adobe Acrobat'''
:'''Adobe Acrobat''' (for Epilog LASER)


==Member Showcase==
== Additional Help==
:Use the PPM Slack channel #laser-cutter


===Boss Laser Photo Gallery===
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
<gallery>
File:Wall art Garden of the Gods.jpg|alt=Garden of the Gods wall art|<center>Garden of the Gods<br>48"x24"<br>(by Robbie Cochran)</center>
File:Station 11 Battalion 2 sign.jpg|alt=Station 11 Battalion 2 sign|<center>Station 11 Battalion 2<br>backlit district map<br>(by Joey Callahan)</center>
File:Laser engraved panels.jpg|alt=Laser engraved panels|<center>Laser engraved panels<br>(by Uncle Mike Mike)</center>
File:Wall art INGLOURIOUS BASTERDS.jpg|alt=INGLOURIOUS BASTERDS wall art|<center>INGLOURIOUS BASTERDS<br>minimalist wall art<br>(by Ben Severson)</center>
File:IRON GIANT 1.jpg|alt=THE IRON GIANT 14"x24" minimalist wall art|<center>THE IRON GIANT<br>minimalist wall art<br> 14"x24"<br>(by Ben Severson)</center>
</gallery>


=== Epilog Laser Photo Gallery ===
<gallery>
File:Laser cut wooden clock.jpg|alt=Laser cut wooden clock|<center>Laser cut<br>wooden clock<br>(Trevor Banks)</center>
File:Round PCB PPM clock.jpg|alt=Round PCB PPM clock|<center>Round PCB<br>PPM clock</center>
File:PPM engraved PCB keychain.jpg|alt=PPM engraved PCB keychain|<center>PPM engraved PCB keychain</center>
File:Minnesota Nice.jpg|alt=Minnesota NICE|<center>Minnesota NICE<br>(May 29, 2015)</center>
File:Light switch cover.JPG|alt=Light switch cover|<center>Light switch cover</center>
</gallery>
{{Template:Showcase_blurb}}
==Curated Links==
:'''[https://www.imag-r.com/ ImagR] -- Prepare your image for laser engraving'''
==Other Fun Stuff==
:'''Cut boxes with a laser cutter: [https://www.makercase.com/ MakerCase] or [https://hackaday.io/project/10649-boxespy Boxes.py]'''
<br>
<hr>
{{Template:Footer}}
{{Template:Footer}}
<hr style="height:2.5px; background:#D81F2B;">

Latest revision as of 16:07, 24 July 2026

At Pikes Peak Makerspace (PPM), our laser engraver/cutters are the most popular tools in the front part of the building.

Our Epilog Zing laser requires a reservation to use.


Level 3 badge used at Pikes Peak Makerspace
PPM TRAINING & CERTIFICATION REQUIRED

Our Laser Engraver/Cutter Area at Pikes Peak Makerspace consists mostly of Level 3 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.


Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
  • Emergency sign
    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map.
Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721
    PPM Emergency
    Evacuation Plan.pdf
  • PPM Fire Prevention Plan 0407022
    PPM Fire
    Prevention Plan.pdf
  • PPM Fire Escape Plan
    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet
    FIRST AID
    Supply Cabinet
  • FIRST AID kit
    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION
    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
  • SAFETY GOGGLES
    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet
    Flammables Cabinet
    in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.


Classes

Browse and Pay for PPM Classes

PPM Training

Our Zing laser does not require using our T.E.S.L.A. Access system. (Our BOSSLASER and Thunder Laser do.)

Epilog laser engraver/cutter

  • Zing Instruction Sheetv3.pdf
    Zing Instruction Sheetv3.pdf


DO NOT cut materials with PVC on any of our lasers, this will release chlorine gas which is toxic.

ALWAYS ensure the work area interior and exterior is clean before and after your work.
The maximum bed size for vector cutting or raster etching is 16” x 12” or less.


Laser Cutting Material Table‏‎
Laser Cutting Acrylic‏‎


The following pages contain historical information. The pages are provided for reference only.

Introduction to the Zing Laser‏‎

Homebrew CO2 Laser Page — by John Doran (Epilog's VP of Engineering)

Tips

☐ "kerf" refers to the width of a cut (width of material that is removed).
☐ The term kerf is also used in woodworking and metalworking (and has the same meaning).

Equipment Lists

Zing LASER

Picture Item Manufacturer /
Model 		Resources
zing 30 Watt 

CO2 Laser

Cutter/Engraver

Level 3 badge
 Epilog Laser

10000 Laser System

Equipment Reservations

  • Reserve 24 Hours in Advance to Guarantee Equipment.
  • Reservations are given up after 15 minute no show.

If you don't have a reservation:

  • Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.

PPM Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of PPM membership)
Website Benefit Address
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
CO Lumber Specialties 10% discount 3636 Stone Avenue
GENERAL AIR 10% discount 3031 N Nevada Ave.
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street

PPM Policies

Materials

DO NOT cut materials with PVC on any of our lasers, this will release chlorine gas which is toxic.
Avoid reflective material. (Avoid cutting or engraving compact discs, for example.)
To donate for "Wood Sheet for Laser" use the Optix app.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tag-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Related Software

The dedicated computer in our Zing cutter/engraver area has the following software installed, and more:

Design Software

Adobe Illustrator Tips
Adobe Photoshop Tips

Printing Software

Adobe Acrobat

Additional Help

Use the PPM Slack channel #laser-cutter
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.


Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=Laser_—_Epilog_Zing&oldid=23773"