CNC: Difference between revisions

From Pikes Peak Makerspace Wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
No edit summary
 
(293 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Level_3_badge.png|alt=|left|frameless|100x100px]]
'''At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18').'''
<br>
<br>
[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|90x90px|PPM TRAINING & CERTIFICATION REQUIRED]]
The CNC Area at PPM consists mostly of Level&nbsp;3&nbsp;equipment.


'''The CNC Area at Pikes Peak Makerspace (PPM) consists mostly of Level&nbsp;3&nbsp;equipment.'''
Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.
 
<br>
Additional training is required to use our Level&nbsp;3 equipment.
<br>
<br>
{{Template:Contact Us}}


<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;</span> [[CNC#Hand Tools|hand tools]] should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
<hr style="height:2.5px; background:#2B78BE;">


Our CNC room is 234 square feet (13'x18'). It is '''a small but important part of the 5,500 square foot building that we lease.'''
<br>
<br>
{{Template:Safety}}
<br>
<br>
[[File:CNC Area.jpg|alt=CNC Area|thumb|300x300px|<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;&nbsp;03/15/22&nbsp;<br><br></span>]]
<hr style="height:2.5px; background:#2B78BE;">
{{Template:Safety}}


==Classes and Training==
==Classes==
:To help out in the CNC Area, contact us on our Slack #cnc-machines.


==='''[[New Member Orientation]]'''===
==Training==
===Area Captain -- Trevor Banks===
☐ Check, and empty, the dust collection barrel before and after each use.
:View all '''[https://wiki.pikespeakmakerspace.org/index.php/About_PPM#PPM_Area_Captains PPM Area Captains]'''
===[[Area Captain Duties#CNC|Area Captain Duties]]===


:To help out in the CNC Area, contact the Area Captain on Slack.
'''Links to external sites:'''


===Classes===
:[https://www.precisebits.com/reference/glossary.htm '''Glossary'''] — from PreciseBits (Palmer Lake, Colorado)
:Pikes Peak Makerspace announces its  [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']
:[https://www.cnccookbook.com/g-wizard-cnc-speeds-and-feeds-calculator/ '''G-Wizard, CNC Speeds and Feeds Calculator''']
===Training===
:[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz '''Intro to Roland MDX-15''']


===Events===
'''Mach4 is the software we use to send G-code to our Avid CNC router table:'''
<gallery>
:'''[https://www.machsupport.com/help-learning/artsoft-mach-support-forums/ Artsoft / Mach Support Forums]'''
File:TOSC tours CNC Area.jpg|alt=TOSC tours CNC Area|<center>TOSC tours CNC Area<br>(2021-11-24)</center>
:'''[https://www.avidcnc.com/support/instructions/software/mach4UsersGuide/ Mach4 Users Guide]'''
File:CNC Area 2021-11-24.jpg|alt=CNC Area 2021-11-24|<center>CNC Area<br>(2021-11-24)</center>
:'''[https://www.machsupport.com/software/mach4/ Mach4 Product Home Page]'''
File:CNC Class Nov 2017.jpg|alt=CNC Class November 18, 2017|<center>CNC Class<br>(November 18, 2017)</center>
File:Downtown-CS-check.jpg|alt=Grant check|<center>Grant check presentation<br>(July 30, 2016)</center>   
</gallery>
 
===For Additional Help===
:Use the PPM Slack channel #cnc-machine


==Equipment Lists==
==Equipment Lists==
 
==='''PPM Equipment List'''===
===PPM Equipment List===
{| class="wikitable"
{| class="wikitable sortable"
|+
|+


|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#2B78BE; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|Picture
|'''Item'''
|Item
|'''Manufacturer'''
|Manufacturer / <br>Model
|'''Model<br>Number'''
|Resources
|'''Estimated<br>Value'''
|Owner
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|-
|-
|
|
|'''CNC router parts&nbsp;pro'''<br>
|'''CNC router parts&nbsp;pro'''<br>
[[File:Level 3 badge.png|left|frameless|55x55px]]
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|45x45px]]
|Avid CNC
|Avid CNC
|[https://www.avidcnc.com/pro4896-4-x-8-cnc-router-kit-p-253.html 4' x 8' CNC Router Kit]
|PPM
|-
|
|
|
|
|
|<p style="text-align:right;">$7,000</p>
|yes
|PPM
|working
|
|
|-
|-
|
|
|'''shopmaster eldorado'''
|'''handibot'''<br>
'''bridge&nbsp;mill'''<br>
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|45x45px]]
[[File:Level 3 badge.png|left|frameless|55x55px]]
|ShopBot Tools, Inc.
|shopmaster
handibot
|
|[https://handibot.com/ Handibot]
|<p style="text-align:right;">$5,000</p>
 
|yes
[https://www.shopbottools.com/training/ Training Material]
|PPM
|PPM
|working
|
|-
|-
|
|
|'''Roland CNC'''<br>
|'''Roland CNC'''<br>
[[File:Level_2_badge.png|left|frameless|55x55px]]
[[File:Level_2_badge.png|alt=Level 2 badge|left|frameless|45x45px]]
|[https://www.rolanddga.com/ Roland]
|Roland
|Modela  
Modela MDX-15
MDX-15
|
|[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support]
|[https://www.rolanddga.com/support/products/milling/modela-mdx-15-3d-milling-machine Roland Technical Support]
[https://docs.google.com/document/d/14J23HPfQ99lgIvZXp89AtvGRvSQFEfqUR9xPNU9O4cA/edit#heading=h.cm2jvhhse2sz Intro to Roland MDX-15]
|PPM
|PPM
|?
|- style="font-weight:bold; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
|
|
|-
|
|
|'''handibot'''<br>
[[File:Level_2_badge.png|left|frameless|55x55px]]
|ShopBot
|
|
|
|
|?
|PPM [https://wiki.pikespeakmakerspace.org/index.php/Donations_Received#2020_Donations (Donated by David&nbsp;Hsu)]
|?
|
|
|-
|'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model<br>Number'''
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|}
|}


===CNC Equipment List===
==='''CNC Equipment List'''===
{| class="wikitable sortable"
{| class="wikitable"
|+
|+


|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#2B78BE; color:#ffffff;"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#2B78BE; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
| style="vertical-align:middle;" |Picture
|'''Item'''
|Item
|'''Manufacturer'''
|Manufacturer
|'''Model<br>Number'''
|Resources
|'''Estimated<br>Value'''
|Owner
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|-
|-
|[[File:Handibot.jpg|alt=handibot engraver|center|frameless|150x150px]]
|'''handibot'''<br>
[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|45x45px]]
|ShopBot Tools, Inc.
|[https://www.shopbottools.com/training/ Training Material]
|'''John Norton'''
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|<br>'''CNC shark'''<br><br>
|Nextwave Automation
|
|<p style="text-align:right;">$3,500</p>
|
|
|'''Drew Johnson'''
|working
|
|
|-
|[[File:Handibot.jpg|alt=handibot|center|frameless|150x150px]]
|'''handibot'''
|ShopBot
|
|
|<p style="text-align:right;">$2,000</p>
|?
|'''John Norton'''
|working
|
|-
|'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model<br>Number'''
|'''Estimated<br>Value'''
|'''Manual'''
|'''Owner'''
|'''Status'''
|'''Problem<br>Description'''
|}
|}


===Hand Tools===
===Hand Tools===
:<span style="color:#FFFFFF; background:#2B78BE">&nbsp;CNC Area&nbsp;</span> hand tools should be marked with <span style="color:#2B78BE">'''blue'''</span> tape or paint.
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.


===[[Donations Received]]===
:☐ Return all tools to their proper location after use. This rule applies to all areas of our&nbsp;Makerspace.
===[[Wish List#CNC|Wish List]]===


==Benefits and Policies==
===Equipment Reservations===
{{Member Benefits}}
===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "General Supplies" via PayPal:  [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''


=== [[New Member Orientation#Red Tags and Reporting Issues|Red Tags and Reporting Issues]] ===
'''If you don't have a reservation:'''
{{Scrap and Trash}}
==Software==


===[[Autodesk Fusion 360 Tips|Fusion 360]]===
*'''Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.'''


===[[VCarve Tips|VCarve]]===
==Benefits==
{{Member Benefits}}


===[[Mach 4 Tips|Mach 4]]===
==Policies==
'''Materials'''
:To donate for "General Supplies" use the Optix app.


===Mach 3===
{{Red Tags}}


==Member Showcase==
== Additional Help ==
<gallery>
Use the PPM Slack channel #cnc-machines
File:Catch all tray.jpg|<center>Walnut<br>catch all tray<br>(Henry Doheny)</center>
File:Monarch CDC.jpg|alt=Monarch CDC|<center>Monarch CDC<br>sign<br>(Michael Hebert)</center>
File:Chair glue-up.jpg|alt=Early CNC project finished chair (Bob Parsons)|<center>Early CNC project<br>finished chair<br>(Bob Parsons)</center>
File:Chair Bob Parsons.jpg|alt=Early CNC project (Bob Parsons)|<center>Early CNC project<br>(Bob Parsons)</center>
</gallery>
{{Template:Showcase_blurb}}


==Curated Links==
Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the&nbsp;community.
:'''[https://www.avidcnc.com/pro4896-4-x-8-cnc-router-kit-p-253.html 4' x 8' CNC Router Kit]'''<br>


==Other Fun Stuff==
:'''[https://www.youtube.com/watch?v=dY8v0j6uEJc Frank makes] -- CNC Build on YouTube'''
:
<br>
<hr>
{{Template:Footer}}
{{Template:Footer}}
<!--Andrew-->
<hr style="height:2.5px; background:#2B78BE;">

Latest revision as of 21:41, 26 June 2026

At Pikes Peak Makerspace (PPM), our CNC room is 234 square feet (13'x18').

Level 3 badge used at Pikes Peak Makerspace
PPM TRAINING & CERTIFICATION REQUIRED

The CNC Area at PPM consists mostly of Level 3 equipment.

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.


Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.


Safety First

Members must know the following information:

In case of emergency, call 911.
Our physical location is:
735 East Pikes Peak Avenue
Colorado Springs, CO 80903
  • Emergency sign
    IN CASE OF
    EMERGENCY
    sign

PPM Fire Escape Plan

Fire Escape Plan maps are posted throughout the Makerspace.
There are 7 fire extinguishers on the fire escape plan map.
Review the PPM Fire Escape Plan for locations.
  • PPM Emergency Evacuation Plan 040721
    PPM Emergency
    Evacuation Plan.pdf
  • PPM Fire Prevention Plan 0407022
    PPM Fire
    Prevention Plan.pdf
  • PPM Fire Escape Plan
    PPM Fire Escape
    Plan

First Aid

There is a FIRST AID Supply Cabinet in our Kitchen Area.
FIRST AID Kits are available in four areas: the Kitchen, Metal Shop, Wood Shop and CNC Room.
  • FIRST AID Supply Cabinet
    FIRST AID
    Supply Cabinet
  • FIRST AID kit
    FIRST AID
    Kit

Eye Wash Stations

Emergency Eye & Face Wash Stations are mounted in four areas: the Kitchen, Wood Shop, CNC Room and Vented Room.
  • EMERGENCY EYE & FACE WASH STATION
    Emergency
    Eye & Face Wash
    Station

Personal Protective Equipment (PPE)

Wear protective equipment in all Wood and Metal Shop Areas.
Wear gloves when using Isopropyl Alcohol and other cleaners.
Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
  • SAFETY GOGGLES
    Personal Protective Equipment (PPE)

Hazardous Chemicals

All hazardous chemicals must be stored in the yellow hazardous chemical storage cabinet located in the Vented Room.
Review the Safety Data Sheet (SDS) information of unknown products before use.
SDS information is available via this spreadsheet.
Do not bring dangerous chemicals to the makerspace.
Spray paint, stains, and other approved items must be stored in the hazardous chemical storage cabinet in the Vented Room.
Please DO NOT paint indoors.
  • flammables cabinet
    Flammables Cabinet
    in the Vented Room

Other Hazards

Avoid placing uncovered (extension) cords, hoses, cables, or wires across the floors of our shops.

Impairment

The use of PPM equipment requires you to be alert, attentive, and focused.
Do not use any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.


Classes

To help out in the CNC Area, contact us on our Slack #cnc-machines.

Training

☐ Check, and empty, the dust collection barrel before and after each use.

Links to external sites:

Glossary — from PreciseBits (Palmer Lake, Colorado)
G-Wizard, CNC Speeds and Feeds Calculator

Mach4 is the software we use to send G-code to our Avid CNC router table:

Artsoft / Mach Support Forums
Mach4 Users Guide
Mach4 Product Home Page

Equipment Lists

PPM Equipment List

Picture Item Manufacturer /
Model 		Resources Owner
CNC router parts pro
Level 3 badge
 Avid CNC 4' x 8' CNC Router Kit PPM
handibot
Level 2 badge
 ShopBot Tools, Inc.

handibot

Handibot

Training Material

PPM
Roland CNC
Level 2 badge
 Roland

Modela MDX-15

Roland Technical Support

Intro to Roland MDX-15

PPM

CNC Equipment List

Picture Item Manufacturer Resources Owner
handibot engraver
 handibot
Level 3 badge
 ShopBot Tools, Inc. Training Material John Norton

Hand Tools

☐ Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

Equipment Reservations

If you don't have a reservation:

  • Be sure your job does not run longer than an upcoming reservation or you are expected to stop your job.

Benefits

PPM members enjoy discounts at the following local merchants:
(bring proof of PPM membership)
Website Benefit Address
Woodcraft of Colorado Springs 10% discount    4438 Austin Bluffs Parkway
CO Lumber Specialties 10% discount 3636 Stone Avenue
GENERAL AIR 10% discount 3031 N Nevada Ave.
ACE Hardware Uintah Gardens 10% discount 1830 W Uintah Street

Policies

Materials

To donate for "General Supplies" use the Optix app.

Red Tags

If equipment needs repairs, place a Red Tag on it and report it via the Pikes Peak Makerspace Slack channel #red-tag-issues
This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

Additional Help

Use the PPM Slack channel #cnc-machines

Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.


Search the PPM Wiki — include Content pages as well as Multimedia.

Contact Us if you cannot find your answer here on our Wiki or if you notice any outdated information.

Retrieved from "https://wiki.pikespeakmakerspace.org/index.php?title=CNC&oldid=23738"