Pikes Peak Makerspace Wiki - User contributions [en]

Rules, Policies, and Orientation

2025-03-18T23:28:03Z

Drew: This is a prototype page

==Things to Know About Pikes Peak Makerspace==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

*A facility with space and equipment for creating physical items for fun and education.
*A gathering place for classes and instruction.
*Support for the Colorado Springs startup community.
*Access to shared equipment, tools, and designated work areas.
*A community-driven environment with a commitment to safety and respect.
*Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
==Membership Information==

====Becoming a Member====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

*Monthly membership: $55
*2-Card Bundle: $75/month
*Student Membership (18 years old minimum): $35/month
*Annual Membership: $605/year (one month free)
*Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

====Change or Cancel your Membership====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

=====Pausing Membership=====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

*Certifications will expire?

=====Lapsed Membership=====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

=====Replacing your RFID Card=====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==Member Code of Conduct==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==Guest Policies==
Anyone visiting the space for any reason other than a basic tour must sign the liability waiver at [https://www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]
*'''This is important for all the below reasons:'''
**It communicates that all guests are responsible for their own safety
**It makes guests consider the "no lifeguard on duty/ swim at your own risk" aspect of the place they are entering
**It gives us (the member signing them in) an opportunity to talk about safety with the guests

*Guests must accompany a member at all times.
*Guests may not operate equipment unless it is part of a supervised class that is open to the public.
*Frequent guests are encouraged to become members.
*Minors under 18 are not permitted to use tools or be in the space unsupervised.
*Guests may not remain in the space without a keyed member present.
*Members are responsible for their guests’ actions, behavior, and safety.

=====Minors=====

#Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
#Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#*Limited circumstances means PPM-hosted family events, tours, or brief visits.
#*Accompanied closely means visual range generally, and never in the shop near dangerous tools.
#Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

=====Pets and Service Animals=====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

==Equipment Use and Training==

*Members must follow all posted operating procedures.
*If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
**Report the issue in Slack (#red-tags-issues) or to the Executive Director.
**Do not attempt unauthorized repairs.
*Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

====Certification Classes====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

*Level 1: No training required.
*Level 2: Requires a basic training class.
*Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

====Expert Checkout====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

===Red Tags===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

===Teach a Class or Host an Event===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
*Members are encouraged to propose and host events or classes at PPM.
*All events must be approved by the Executive Director.
*Members can charge for classes, but event fees must be reviewed and approved.
*Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

==Member Benefits==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

:'''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
:'''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

===Paying for Consumables===

*Consumables such as wood glue, 3D print filament, blue tape, and sheet stock for the laser engravers are not free.
*Use the QR codes (PayPal) throughout the space, this link [http://www.bit.ly/ppmstuff www.bit.ly/ppmstuff] , or a cash box with a note about what you used paperclipped to the cash.

==Building Access and Usage==
The facility is accessible 24/7 to members with RFID cards.

====Security====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

=====Recording in Progress=====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

=====Front Door Security=====

======Use the peep hole!======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

======Packages======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

======Mail======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

====Last One Out Rules====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

====Parking at PPM====

*Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
*Additional free off-street parking during special events will often be available in the empty lot west of the building.
*There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
*People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
*Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
*Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
*There is no exterior EV charging available at this time.
*Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
*Respect the parking spaces for our immediate neighbor to the east, PikeRide.
*Snow removal for the parking lots is the responsibility of the property manager.
*If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and Trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
====2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
==Storage Policies==

*Members must label stored projects with their name, expected return date, and contact info.
*Green Tag System is required for temporary storage.
*Limited long-term storage options available (please check with staff for availability and payment setup):
**Blue gym lockers: $10/month
**Rollable clear tote storage: $20/month
**Woodshed XL storage: $10 for 7 days
*Unlabeled or abandoned items may be trashed, removed, or reassigned.
*Material Storage for Lasers
**Material can be stored in the rack nearest the Zing laser
**If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
**Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

==Computers and Personal Devices==
The computer login information and Wi-Fi network credentials can be found on white boards in the space. [On the right of the FIRST AID Supply Cabinet]

Login Password: [on small laminated sign on white board just to the left of the FIRST AID Supply Cabinet]

====PPM Computer Rules====

*Members are not given personal logins or passwords.
*Backup work on an external storage device.
*Do not leave any messes in any workspace (anything without a name can be tossed or relocated to lost and found).

====Shared Network Drive====
'''''This shared drive is visible to all members.'''''

:0. If you need security, do not use this drive.
:1. Files might be removed automatically after 2 months.
:2. Do not store files in the main folder directory.
:3. Keep your own backup! We are not responsible if your data becomes lost or corrupted in any way

*The s:/ drive is a shared network drive available on all PPM computers.
*You can also access the shared network drive from computers you bring into PPM.
*All you need to do to enjoy it is create a folder for yourself in the drive!
{{Safety}}

====Reporting Injuries====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

==Final Notes==
*Always leave the space better than you found it.
*Engage in the community and contribute positively to the makerspace experience.
*Commercial production may be restricted if it interferes with other members’ use of equipment.
*Members should review policies regularly as updates may be implemented at any time.
*For further information, visit the PPM Wiki or contact the Executive Director via Slack.
*Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-18T22:04:48Z

Drew: Blanked the page

Rules, Policies, and Orientation

2025-03-05T01:28:39Z

Drew: /* Storage Policies */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

== Guest Policies ==
Anyone visiting the space for any reason other than a basic tour must sign the liability waiver at [https://www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]
*'''This is important for all the below reasons:'''
**It communicates that all guests are responsible for their own safety
**It makes guests consider the "no lifeguard on duty/ swim at your own risk" aspect of the place they are entering
**It gives us (the member signing them in) an opportunity to talk about safety with the guests

* Guests must accompany a member at all times.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

=== Paying for Consumables ===

* Consumables such as wood glue, 3D print filament, blue tape, and sheet stock for the laser engravers are not free.
* Use the QR codes (PayPal) throughout the space, this link [http://www.bit.ly/ppmstuff www.bit.ly/ppmstuff] , or a cash box with a note about what you used paperclipped to the cash.

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and Trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

== Computers and Personal Devices ==
The computer login information and Wi-Fi network credentials can be found on white boards in the space. [On the right of the FIRST AID Supply Cabinet]

Login Password: [on small laminated sign on white board just to the left of the FIRST AID Supply Cabinet]

==== PPM Computer Rules ====

* Members are not given personal logins or passwords.
* Backup work on an external storage device.
* Do not leave any messes in any workspace (anything without a name can be tossed or relocated to lost and found).

==== Shared Network Drive ====
'''''This shared drive is visible to all members.'''''

: 0. If you need security, do not use this drive.
: 1. Files might be removed automatically after 2 months.
: 2. Do not store files in the main folder directory.
: 3. Keep your own backup! We are not responsible if your data becomes lost or corrupted in any way

* The s:/ drive is a shared network drive available on all PPM computers.
* You can also access the shared network drive from computers you bring into PPM.
* All you need to do to enjoy it is create a folder for yourself in the drive!
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:22:44Z

Drew: /* Member Benefits */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

== Guest Policies ==
Anyone visiting the space for any reason other than a basic tour must sign the liability waiver at [https://www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]
*'''This is important for all the below reasons:'''
**It communicates that all guests are responsible for their own safety
**It makes guests consider the "no lifeguard on duty/ swim at your own risk" aspect of the place they are entering
**It gives us (the member signing them in) an opportunity to talk about safety with the guests

* Guests must accompany a member at all times.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

=== Paying for Consumables ===

* Consumables such as wood glue, 3D print filament, blue tape, and sheet stock for the laser engravers are not free.
* Use the QR codes (PayPal) throughout the space, this link [http://www.bit.ly/ppmstuff www.bit.ly/ppmstuff] , or a cash box with a note about what you used paperclipped to the cash.

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and Trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:21:23Z

Drew: /* Guest Policies */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

== Guest Policies ==
Anyone visiting the space for any reason other than a basic tour must sign the liability waiver at [https://www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]
*'''This is important for all the below reasons:'''
**It communicates that all guests are responsible for their own safety
**It makes guests consider the "no lifeguard on duty/ swim at your own risk" aspect of the place they are entering
**It gives us (the member signing them in) an opportunity to talk about safety with the guests

* Guests must accompany a member at all times.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and Trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:15:36Z

Drew: /* Cleaning Up */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and Trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:13:54Z

Drew: /* Anti-Harassment and Anti-Discrimination Policy */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Cleaning Up==
*If you notice a trash can getting full, take responsibility for emptying it.
*Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (1 of them) and are picked up every two weeks.
{{Scrap and trash}}

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:10:49Z

Drew: /* Building Access and Usage */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Member Benefits ==
PPM members enjoy discounts at the following local merchants:

(bring proof of membership)
{| class="wikitable"
|'''Company'''
|'''Website'''
|'''Benefit'''
|'''Directions to'''
|-
|[[File:Logo_WOODCRAFT.jpg|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''Woodcraft of Colorado Springs'''
|10% discount   
|'''4438 Austin Bluffs Parkway'''
|-
|[[File:Logo_CO_Lumber.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_CO_Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''CO Lumber Specialties'''
|10% discount
|'''3636 Stone Avenue'''
|-
|[[File:Logo_General_Air.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_General_Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''GENERAL AIR'''
|10% discount
|'''3031 N Nevada Ave.'''
|-
|[[File:Logo_ACE.png|link=https://wiki.pikespeakmakerspace.org/index.php/File:Logo_ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''ACE Hardware Uintah Gardens'''
|10% discount
|'''1830 W Uintah Street'''
|}

: '''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
: '''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:07:05Z

Drew: /* Teach a Class or Host an Event */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===
We rely on Members like you to teach our certifications courses! If you are willing and able to teach a certification course, please let a staff member or Board member know!
* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:05:33Z

Drew: /* Building Access and Usage */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

== Building Access and Usage ==
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:05:05Z

Drew: /* Equipment Use and Training */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

== Equipment Use and Training ==

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-05T01:04:30Z

Drew: /* Member Code of Conduct */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

== Member Code of Conduct ==
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-04T23:56:52Z

Drew:

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

===Rules and Policy Changes===
These rules and policies are subject to change at any time by the Executive Director or Board of Directors.
== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-04T23:54:25Z

Drew: /* Storage Policies */

== Things to Know About Pikes Peak Makerspace ==
In case of emergency, call 911.

Our physical location is:

735 East Pikes Peak Avenue

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

==Anti-Harassment and Anti-Discrimination Policy==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.
===Reporting Concerns===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:
====1. Anonymous Reporting Form:====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.
==== 2. Direct Reporting Against a Board Member:====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.
===Response to Concerns===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:
*Temporarily restricting participation of the individuals involved pending further review.
*Providing necessary support or resources to impacted members.
*Engaging external professionals or authorities if required.
'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.
===Maintaining Confidentiality===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.
===Zero Tolerance for Retaliation===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.
===Education and Prevention===
PPM recognizes the importance of prevention through education. We provide:
====Training for Leadership:====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.
====Member Awareness:====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.
== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.
{{Safety}}

==== Reporting Injuries ====
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

== Final Notes ==
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-04T23:51:12Z

Drew: /* Final Notes */

Rules, Policies, and Orientation

2025-03-04T23:50:41Z

Drew: /* Safety and Emergency Procedures */

Rules, Policies, and Orientation

2025-03-04T23:48:03Z

Drew: /* Safety and Emergency Procedures */

Rules, Policies, and Orientation

2025-03-04T23:44:56Z

Drew: /* Things to Know About Pikes Peak Makerspace */

Rules, Policies, and Orientation

2025-03-04T23:43:04Z

Drew:

== Things to Know About Pikes Peak Makerspace ==
Pikes Peak Makerspace

735 E Pikes Peak Ave

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Reporting Injuries ===
• Report every injury, and every near miss: [https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Feedback & Incident Report Form]

=== Red Tags ===
• Use a Red Tag, which can be found in the [[:File:RED TAG AREA.jpg|red tag area]], to designate the broken equipment.

• Additionally, report the issue in our Slack channel #red-tags-issues

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

== Safety and Emergency Procedures ==

* Fire extinguishers, first aid kits, and emergency eye wash stations are available throughout the makerspace.
* Fire escape plan maps are posted throughout the facility for emergency preparedness. (Repeated in Final Notes section)
* Members must review the Fire Prevention Plan and Emergency Evacuation Plan.
* Hazardous chemicals must be stored in the designated hazardous materials cabinet in the vented room.
* Review Safety Data Sheets (SDS) before using any chemicals.
* Use proper Personal Protective Equipment (PPE) at all times when required.

=== Final Notes ===
* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

Rules, Policies, and Orientation

2025-03-04T23:37:34Z

Drew: /* Lapsed Membership */

== Things to Know About Pikes Peak Makerspace ==
Pikes Peak Makerspace

735 E Pikes Peak Ave

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== Lapsed Membership =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

== Final Notes ==

* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

== Safety and Emergency Procedures ==

* Fire extinguishers, first aid kits, and emergency eye wash stations are available throughout the makerspace.
* Fire escape plan maps are posted throughout the facility for emergency preparedness. (Repeated in Final Notes section)
* Members must review the Fire Prevention Plan and Emergency Evacuation Plan.
* Hazardous chemicals must be stored in the designated hazardous materials cabinet in the vented room.
* Review Safety Data Sheets (SDS) before using any chemicals.
* Use proper Personal Protective Equipment (PPE) at all times when required.

Rules, Policies, and Orientation

2025-03-04T23:37:15Z

Drew:

== Things to Know About Pikes Peak Makerspace ==
Pikes Peak Makerspace

735 E Pikes Peak Ave

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== '''Lapsed Membership''' =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. '''Make things, not rules'''. Don’t be the reason we have to make a rule.

2. '''Thoroughly Safe'''. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. '''Leave it better.''' After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. '''See something, say something.''' Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. '''Kind Human.''' Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

=== Equipment Use and Training ===

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

==== Certification Classes ====
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

==== Expert Checkout ====
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

=== Teach a Class or Host an Event ===

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

=== Building Access and Usage ===
The facility is accessible 24/7 to members with RFID cards.

==== Security ====
You are responsible for your own safety. You are expected to maintain a secure environment for other members.

===== Recording in Progress =====
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===== Front Door Security =====

====== Use the peep hole! ======
Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

====== Packages ======
Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

====== Mail ======
USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

==== Last One Out Rules ====
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

==== Parking at PPM ====

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

== Final Notes ==

* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

== Safety and Emergency Procedures ==

* Fire extinguishers, first aid kits, and emergency eye wash stations are available throughout the makerspace.
* Fire escape plan maps are posted throughout the facility for emergency preparedness. (Repeated in Final Notes section)
* Members must review the Fire Prevention Plan and Emergency Evacuation Plan.
* Hazardous chemicals must be stored in the designated hazardous materials cabinet in the vented room.
* Review Safety Data Sheets (SDS) before using any chemicals.
* Use proper Personal Protective Equipment (PPE) at all times when required.

Rules, Policies, and Orientation

2025-03-04T23:30:08Z

Drew: Creating a replacement page for consolidated rules, policies, and new member orientation

== Things to Know About Pikes Peak Makerspace ==
Pikes Peak Makerspace

735 E Pikes Peak Ave

Colorado Springs, CO 80903

719-445-MAKE(6253) -- Goes straight to voicemail --

Contact Us: https://pikespeakmakerspace.org/Contact

EIN: 81-0876257

Pikes Peak Makerspace (PPM) is a registered 501(c)(3) non-profit organization.

We a collaborative environment composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators, fostering creativity in the Pikes Peak Region.

PPM provides:

* A facility with space and equipment for creating physical items for fun and education.
* A gathering place for classes and instruction.
* Support for the Colorado Springs startup community.
* Access to shared equipment, tools, and designated work areas.
* A community-driven environment with a commitment to safety and respect.
* Members discounts at select local vendors.

== Membership Information ==

==== Becoming a Member ====
1) Take a Tour

We strongly recommend taking an on-site tour before taking the membership quiz. This will introduce you to the Pikes Peak Makerspace’s equipment and culture.

2) Choose a membership level from our website that best suits your situation.

Memberships are managed via Join It, where you can register for membership and set up automatic monthly payments through Stripe.

* Monthly membership: $55
* 2-Card Bundle: $75/month
* Student Membership (18 years old minimum): $35/month
* Annual Membership: $605/year (one month free)
* Corporate Memberships: Contact PPM Executive Director -

3) Take our New Member Orientation Quiz.

Passing the quiz with 70% or better is mandatory for all new members. Feel free to take the quiz before signing up if you want to! [Take me to the quiz!] Look out for a confirmation email!

Once you pass the quiz with a 70% or higher, you will receive an email with instructions on scheduling a time to pick up your RFID access card to the building. There is a $10 donation for the RFID card. If you get 100% on the quiz, it is FREE!

Once you have picked up your RFID card, you are free to use the design computers and office printer, and can take certification classes to use the shared tools and work areas.

Certification courses can be found on Meetup: <nowiki>https://www.meetup.com/pikespeakmakerspace/events/</nowiki>

If there is a piece of equipment we have that you wish to be certified on that does not have a class posted on Meetup, please reach out to a staff member or the Board of Directors.

==== Change or Cancel your Membership ====
To change your billing details, add a member, or cancel your membership, please reach out to the Membership Manager, Executive Director, or ask for help on Slack. Alternatively, you can login into the CRM and make changes yourself.

Retroactive membership refunds are not permissible.

===== Pausing Membership =====
Our monthly dues are designed to be affordable for long term sustaining memberships. A stable financial model allows us to continue investing in the space and plan for the future.

However, should you need to pause your membership, please be aware of the following:

* Certifications will expire?

===== '''Lapsed Membership''' =====
If your payment bounces for any reason, please login to the CRM or contact a staff member within 4 days to update your billing details. Memberships past due 7 days are subject to removal.

===== Replacing your RFID Card =====
Please don’t lose your card. But if you do, notify a staff member or ask on Slack. Replacements are $10.

==== Member Code of Conduct ====
1. Make things, not rules. Don’t be the reason we have to make a rule.

2. Thoroughly Safe. Always use proper PPE and keep the environment clean. Do not use equipment you are not trained on or comfortable operating. Inspect tools for damage before use, and never be in a rush when making.

3. Leave it better. After putting away tool and required cleanup tasks, spend 5 minutes improving the space before you go.

4. See something, say something. Always speak up if you see a tool being misused or someone endangering themselves/others. Report all equipment issues using red tags, Slack, Area Captains, and/or our Executive Director.

5. Kind Human. Never miss an opportunity to be kind. Unique life experiences and points of view fuel innovation and creates an atmosphere where all Makers feel welcome and included.

If you agree to live up to these expectations, welcome to the family!

==== Guest Policies ====

* Guests must accompany a member at all times.
* Guests must sign the Waiver of Liability before entering the building.
* Guests may not operate equipment unless it is part of a supervised class that is open to the public.
* Frequent guests are encouraged to become members.
* Minors under 18 are not permitted to use tools or be in the space unsupervised.
* Guests may not remain in the space without a keyed member present.
* Members are responsible for their guests’ actions, behavior, and safety.

===== Minors =====

# Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
# Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#* Limited circumstances means PPM-hosted family events, tours, or brief visits.
#* Accompanied closely means visual range generally, and never in the shop near dangerous tools.
# Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===== Pets and Service Animals =====
Pets are NOT allowed in common areas of the building. Service animals are exempted.

= Equipment Use and Training =

* Members must follow all posted operating procedures.
* If equipment is damaged or not functioning properly Use a Red Tag to label the equipment.
** Report the issue in Slack (#red-tags-issues) or to the Executive Director.
** Do not attempt unauthorized repairs.
* Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.

== Certification Classes ==
Equipment is categorized into different levels based on required training. Members must complete the necessary certification before being granted access:

* Level 1: No training required.
* Level 2: Requires a basic training class.
* Level 3: Requires advanced training and certification.

Certification classes are taught by PPM members and volunteers.

Only members who have completed official PPM training and received certification for Level 2 and Level 3 may use restricted equipment. Due to the hazardous nature of some tools, additional training classes are required at an extra cost to ensure safety and competency. Unauthorized tool use may result in disciplinary action.

Certification schedules are available on Meetup; interested members should visit Meetup to register for the classes and coordinate with area captains.

== Expert Checkout ==
If you are confident in your ability to use a piece of equipment that requires certification, you can reach out to the instructor and request an “expert checkout.”

The class fee is still required, as that funds maintenance and upkeep of the equipment.

= Teach a Class or Host an Event =

* Members are encouraged to propose and host events or classes at PPM.
* All events must be approved by the Executive Director.
* Members can charge for classes, but event fees must be reviewed and approved.
* Event proposals should be submitted to the Executive Director, shared on Slack to gauge interest, or brought up at a Board meeting.

= Building Access and Usage =
The facility is accessible 24/7 to members with RFID cards.

== Parking at PPM ==

* Parking at PPM is free for members, guests, and visitors alike. Park on the north and south sides of the building.
* Additional free off-street parking during special events will often be available in the empty lot west of the building.
* There is no reserved parking. As a courtesy, leave close-in spots available for guests or visitors.
* People who do park close-in may be asked to move their vehicles if they are blocking our (2) large overhead doors or our small doors when somebody has stuff to unload.
* Be aware of delivery vehicles (like Amazon, FedEx, UPS, or USPS) in our lots.
* Do not block the alleyway in the back (southeast of the building), the lanes along the sides of our building, or the dumpster(s).
* There is no exterior EV charging available at this time.
* Bicycles are welcome at PPM, can be brought into the building, and can be recharged inside.
* Respect the parking spaces for our immediate neighbor to the east, PikeRide.
* Snow removal for the parking lots is the responsibility of the property manager.
* If there are any issues contact our Executive Director on Slack, who will contact the property owner.

== Accessing the Space and Parking, and Security ==

*
* Parking is free for members and guests, with additional parking available for special events.
* Do not block loading zones or overhead doors.
* When answering the door, check the peephole and verify visitors.
* Members should not share their RFID access card.

== Security ==

=== Recording in Progress ===
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

=== Front Door Security ===
Use the peep hole!

Do not answer the door unless you are confident the visitor is appropriate and you are capable of handling them.

People may come to the door to ask for money, to use your cellphone, or sell you something.

Be aware that you are responsible for your safety and the security of the building when you open the door.

Packages

Amazon, FedEx, and UPS all use the doorbell to deliver packages.

So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace.

Have your name added to the address label.

Look for your package near the front door.

Don't leave packages (or mail) around for long.

Mail

USPS generally does not use the doorbell, because they have been assigned an RFID card for the PPM doors.

Don't leave mail (or packages) around for long.

=== Last One Out Rules ===
After you have cleaned up and you are ready to head out, and you are the last one in the building, you are required to check each of the following. (There is a sign posted on both the front and back door for quick reference.)

Exhaust Fan & Chiller Switch

• All appropriate equipment is powered off

• Shed Door (in South parking lot) is closed and locked

• South Door is closed and locked

• South Overhead Door is closed and locked (BOTH SIDES!)

• Exhaust Fan and Chiller for laser cutters is off (Switch column between laser machines)

• Dust Collection is turned off (CNC Room, Sanding Station, Table Saw). If you can't find the switch, unplug motor.

• East Door closed and locked (Orange tape should be aligned)

• Lights in Woodshop off (Switch located outside of Woodshop doors, right side)

• North Overhead Door is closed and locked (BOTH SIDES!)

• All Appropriate Lights are turned off (There is a bank of switches by the front door)

• Verify the door locks behind you!

== Storage Policies ==

* Members must label stored projects with their name, expected return date, and contact info.
* Green Tag System is required for temporary storage.
* Limited long-term storage options available (please check with staff for availability and payment setup):
** Blue gym lockers: $10/month
** Rollable clear tote storage: $20/month
** Woodshed XL storage: $10 for 7 days
* Unlabeled or abandoned items may be trashed, removed, or reassigned.
* Material Storage for Lasers
** Material can be stored in the rack nearest the Zing laser
** If a member wishes to store their material in the rack then they must label each piece with their name, contact information, and date on blue tape.
** Any material that has no such label, has a label with no date or a date past 90 days is available to any member for use at their discretion.

== Final Notes ==

* Always leave the space better than you found it.
* Engage in the community and contribute positively to the makerspace experience.
* Commercial production may be restricted if it interferes with other members’ use of equipment.
* Members should review policies regularly as updates may be implemented at any time.
* For further information, visit the PPM Wiki or contact the Executive Director via Slack.
* Fire escape plan maps posted throughout the facility for emergency preparedness.

== Safety and Emergency Procedures ==

* Fire extinguishers, first aid kits, and emergency eye wash stations are available throughout the makerspace.
* Fire escape plan maps are posted throughout the facility for emergency preparedness. (Repeated in Final Notes section)
* Members must review the Fire Prevention Plan and Emergency Evacuation Plan.
* Hazardous chemicals must be stored in the designated hazardous materials cabinet in the vented room.
* Review Safety Data Sheets (SDS) before using any chemicals.
* Use proper Personal Protective Equipment (PPE) at all times when required.

Rules and Policies

2024-12-29T15:05:27Z

Drew: /* Please be sure to report the following types of incidents: */

'''Things to know about PPM - Pikes Peak Makerspace:'''
* We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region.

* We provide a facility with space and equipment for people to create physical items for fun and for education.

* PPM is also a place to gather interested people for all manner of classes and instruction.

* We are tapped into and support the Colorado Springs startup community.

* We are physically located in Colorado Springs, Colorado, USA.

* We are a 501(c)(3) non-profit organization, EIN (Tax ID Number): 81-0876257
 
{{Template:Contact Us}}

   
 
[[File:Burst.png|alt=burst of white rays on orange background|link=https://wiki.pikespeakmakerspace.org/index.php/About_PPM|right|frameless|250x250px]]

==Notice==
'''''These rules are subject to change at any time.'''''

==You need to read all the fine print ==
Access to Pikes Peak Makerspace (PPM) is a privilege, not a right. Members of PPM are responsible for following all applicable rules and policies listed on this page. Violation of PPM policies and procedures can result in consequences up to and including membership termination.

These Safety Policies and Procedures have been implemented to ensure safe operations of equipment, the operator, other members, and the integrity of the facility. All members are required to implement safety procedures while at PPM. Members should only use equipment for which they have been certified for by a trained PPM instructor. Violations of safety policies will be reviewed based on harm, potential harm, and recurrence. Consequences may result based on severity of the violation, as decided by the Executive Director and the Board of Directors based on the PPM Bylaws.

===Recording in Progress===
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===Rules and Policy Changes ===
These rules and policies are subject to change at any time. Changes adopted with a vote from the Board of Directors and/or the membership at a membership meeting will become effective immediately. A summarized version of newly adopted rule(s) will be posted in the space and updated on this page; adapted as necessary for effective communication.

==Standards of Behavior==
#All guests and members must follow the [https://wiki.pikespeakmakerspace.org/index.php/New_Member_Orientation#Member_Code_of_Conduct '''Member Code of Conduct.''']
#Safety is important, if you are unsure of how to safely do something, ask questions.
#The Executive Director or a member of the Board of Directors may ban anyone who violates the Rules and Policies from the premises or online systems. Bans may be appealed in accordance with the Bylaws.
# Don't merely respect each other; be excellent to each other.
#*We are all here to make things and learn. Every Maker is on their own journey.
#*Be helpful and answer questions when you can. If you don't know the correct answer, say so.
#Respect the space.
#* When you break something, own up to it. If you have any doubt about fixing it, ask for help.
#*Don't make someone feel bad for breaking things, help them understand what went wrong.
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.
#*Tools/resources are shared by all members and must stay on the premises at all times.
#Operate only those machines and equipment you have been specifically trained and certified to use by a PPM instructor.
# Members are not allowed to work in the Makerspace when intoxicated, under the influence of controlled substances, sleep deprived, or emotionally distressed.
# Sleeping is not cool, but naps are ok. We are not a hotel nor a place to hide out.
#All members are expected to maintain a safe and clean environment at all times.
#Smoking cigarettes, cigars or vaporizers is prohibited inside the building.
#Do not hack our computer systems. Do not to install unapproved or illegal software.
#Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.
#It is the responsibility of each member to help enforce the Standards of Behavior. If someone is violating the Member Code of Conduct or the Standards of Behavior, politely explain to them why their behavior is not acceptable. Egregious violations should be reported to the Executive Director or the Board of Directors.

===How To Report Incidents===
Should you have any concerns regarding member conduct that is inappropriate and does not represent what you expect at PPM, please use our '''[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Incident/Feedback Report Form]'''.

This form can be filled out with your name, or submitted anonymously. Your report will be received by all members of the Board and your concerns will be addressed. If you provide your contact information when submitting, you will receive a reply from the Board of Directors.

==== Please be sure to report the following types of incidents: ====

* Injury or close call
* Safety concern or hazard
* Members who break the rules
* Unwelcome or inappropriate behavior
* Anything you think the Board should know about

===Guests===
#Guests can not occupy the Pikes Peak Makerspace without another keyed Member present.
#Guests must sign the [https://app.waiverforever.com/pending/fjyagIyDaB1593209306 Waiver of Liability] before entering the building.
#Members may not have guests for the first 30 days.
#Guests are encouraged to become Members. A member referral bonus is available.
#Guests are not allowed to use tools and equipment, except as part of a scheduled class/workshop.
#Members are responsible for their Guest's actions, behavior, and safety.

===Minors===
#Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
#Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#*Limited circumstances means PPM-hosted family events, tours, or brief visits.
#*Accompanied closely means visual range generally, and never in the shop near dangerous tools.
#Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===Pets and Service Animals===
Pets are NOT allowed in common areas of the building.

Service animals are exempted.

== Anti-Harassment and Anti-Discrimination Policy ==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.

=== Reporting Concerns ===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:

==== 1. Anonymous Reporting Form: ====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.

==== 2. Direct Reporting Against a Board Member: ====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.

=== Response to Concerns ===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:

* Temporarily restricting participation of the individuals involved pending further review.
* Providing necessary support or resources to impacted members.
* Engaging external professionals or authorities if required.

'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.

=== Maintaining Confidentiality ===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.

=== Zero Tolerance for Retaliation ===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.

=== Education and Prevention ===
PPM recognizes the importance of prevention through education. We provide:

==== Training for Leadership: ====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.

==== Member Awareness: ====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.

== Membership Dues==
Members are responsible for managing their recurring payments and canceling their membership.

All dues are paid in advance and are recurring.

Monthly subscriptions must be paid by credit card.

Annual or Lifetime memberships can be paid by check or credit card.
{| class="wikitable"
|-
|'''Plan Name'''||'''Rate'''||'''Notes'''
|-
|'''Monthly Membership'''||$55/month||Our standard membership
|-
|'''2-Card Bundle'''
|$75/month
|Two memberships
|-
|'''Student Membership'''||$35/month||For members who are currently in school
|-
|
|
|
|-
|'''Annual Membership'''||$605/year||One month free ($55 x 11 months paid up front)
|-
|'''Annual 2-Card Bundle'''
|$825/year
|One month free ($75 x 11 months paid up front)
|-
|'''Lifetime'''||$5000||Non-transferable
|-
|
|
|
|-
|'''Corporate Membership'''
|
|Use our website to '''[https://pikespeakmakerspace.org/Contact Contact Us]'''
|-
|
|
|
|}

=== Payments ===
If your payment bounces, please take care of it immediately.

*Your payment method will be attempted 4 additional times over the course of 7 days.
*Do not use the space while your membership is past due.
*After 7 days, your membership will be cancelled and you will need to reactivate your membership to start over again.

=== How to cancel your membership ===
If you need to cancel your membership and stop the monthly payments, please do one of the following:

*Open the most recent payment receipt in your email inbox and use the link to login to your membership and cancel.
* Log in to Joinit.com with the credentials you used when signing up for your membership then cancel.
*'''[https://pikespeakmakerspace.org/Contact Contact Us]''' and a Director will assist you in cancelling your membership.

==Voting Rights==
#Members may vote on questions presented at Member Meetings of the Board of Directors.
#Please refer to the Bylaws for more detail about voting rights.

==Storage==

=== Dedicated Spaces===
A limited number of private dedicated spaces are currently in use. If you are interested in a dedicated workspace, please inquire about joining our waitlist. We are not a storage facility. Do not leave personal items and projects laying around in common areas.

'''''Additionally, observe the following storage policies:'''''

===Project Storage===
1. Projects must be actively attended to until completed and/or removed from the building.

2. Woodshop/Metal Shop projects may be kept on site for up to 7 days as long as the following conditions are met.
*Green Project Storage Tags must be used in the woodshop/metal shop.
* Projects must be stored out of the way. (under tables or in our shed, for example).
*After 1 week, you must either remove your project, or fill out a new green tag for another week. Additional weeks are a suggested $10 donation with a max of 4 total weeks.
*If your tag has expired, a PPM Deputy may reach out to you to remove your project.
*If one week has passed since contacting you and action has not been taken, your project will be considered abandoned and removed from site or the materials made available to other members
*Be sure your project storage tag is completely filled out with the following information
::☐ Name

::☐ Today's Date

::☐ Expected Completion Date

::☐ What I’m Making

::☐ Contact Info

3. On a case by case basis and as space allows, longer term storage may be approved by the Executive Director and/or Board of Directors.

===Personal Item Storage at Pikes Peak Makerspace===
Projects must be actively attended to until complete and/or stored appropriately in a designated ppm rentable storage area. Please observe the following storage policies which apply to all areas. Do not leave personal items and projects lying round in common areas; we are not a storage facility.

GREEN TAG your items if you are leaving temporarily; i.e BRB - had to run to the store to get more glue - be back in 20… that's okay, HOWEVER you must fill out a GREEN TAG and keep it CLEARLY by your project while it is momentarily unattended.

The time length of “momentarily” should be no more than a day. If extended time is unavoidable (waiting for shipping for more materials, etc) you must speak with the Executive Director about any rentable solutions available that will fit your project.

'''Current storage options available for members:'''

#Blue gym lockers - $10/mo - ideal for personal storage (jackets/small projects/personal items/backpacks/purses)
#Rollable Clear Tote Storage - $20/mo - ideal for medium to large size projects, materials, or personal tools
# COMING IN 2025: Woodshed XL storage - $10 for 7 days of holding - XL project storage ideal for glue-ups and large projects

'''Storage terms and conditions:'''

#Hazardous or flammable materials must be labeled and stored in the FLAME CABINET currently located in the vented room, absolutely no exceptions. Please do not forget to remove items once your rent term is complete, the flame cabinet is often forgotten when finishing projects and taking home materials.
#Please report any noticed damages of ppm provided storage solutions. Using slack, a direct message to the Executive Director would be the best person to contact about that.
# Lost locker keys; a lost key replacement fee will be charged to the renter if a replacement key is needed for the blue lockers
#Please don’t be the reason we add more terms and conditions.

==Inventory of Parts, Tools, and Equipment==
#Anything in a work area is available for use by all members unless otherwise documented/labeled.
#Items that require training may be secured, but a path to obtain use of said item should be documented.
#Consumables and other items of value should be reimbursed or a donation made for them.
# Items to be considered on display and not storage have to be in a designated area or approved by shop operations.

==Events==
#Scheduled events take priority over "first come, first serve".
#Scheduled events should align with the organizations goals.
#All events must be sponsored and attended by a current member.
#Donations to the space are encouraged but not required to hold events.
#Guest access to the facility will be limited, and guests may be required to sign waivers before attending the event.

===Classes===
Members are encouraged to seek assistance from and provided assistance to other members. Hosting classes is a great way to share skills and knowledge.

Instructors must follow the Member Code of Conduct as well as all Rules and Policies posted on this Wiki page.

Do not engage in any activity that unreasonably interferes with other member's usage of the space, regular scheduled events or reserved equipment.

'''Process for hosting a class:'''

Requests for the use of the space to hold classes can be made by:

- Filling out this [https://forms.gle/PTrNX9yfuq19F4mVA Event Planning Submission Form]

- Contacting Event Coordinators: Executive Director

- [https://pikespeakmakerspace.org/reserve Reserving the space on the reservation system]

Events or classes involving 5 or more people requires approval and reservation of the needed space/equipment.

Committee meetings and small gatherings between members is permitted in most cases without direct approval of the Executive team as long as abiding by the Member Code of Conduct and rules of the space.

One-on-one coaching, assistance or mentorship does not require prior approval.

Any member wishing to charge a fee for hosting a class must seek prior approval. Fees and promotions will be managed by PPM Event Administrators.

Instructors and PPM will share the revenue from the class. Instructors are compensated based on a sliding scale according to skill, time, effort, materials, usage of the space, equipment requirements, and/or other variables as determined by PPM Event Coordinators.

The final cost of the class and instructor compensation will be negotiated between the instructor and an Event Coordinator.
===Types of Organizational Meetings ===
#The Board of Directors holds regular meetings and will announce meetings via email and Slack. Members are welcome to attend.
#Classes may be organized and taught by any member in good standing.
#Community events should support the goals of Pikes Peak Makerspace.
#If an event requires funding, the event proposal form must be submitted.
#Membership meetings for projects and community building will be posted on the Pikes Peak Makerspace Events calendar and promoted on Slack.
#*Membership meetings should always include an act of service to the space such as cleaning or updating computers.

==Program Areas (Shops, Lasers, 3D Printing)==
Existing Program Areas should have designated Captains to perform critical maintenance and repair tasks.

A Captain is a volunteer position who keeps the program area in alignment with the goals of the organization and in line with all rules and procedures. There may be a Captain of an entire work area, or a Captain of just a particular tool.

The Captain serves as the main point of contact for the program area or tool.

If you are interested in becoming a captain, please contact the Executive Director or a member of the Shop Operations committee.

Please review [[Shared Tools and Map|'''Shared Tools and Map''']] for the current directory of PPM Program Areas.

==Committees==
Pikes Peak Makerspace is a volunteer-driven creative space. Everything good that happens is because a member or a committee saw the potential and took the initiative to make it happen.

===Member-Driven Committees===
Member-driven initiatives for new programs and work areas must meet the following criteria:

1. Project committees that impact the way the space operates must be approved by the Executive Director and/or the Shop Operations Committee.

2. Committee must select a chair persons as the primary point of contact and accountability.

3. The Committee chair person will be responsible for providing reports on the status and activities of the committee.

4. Each committee is expected to communicate activities to members via Slack, signage, or the wiki. The following information should always be kept current and available for all  members:
::☐ The name of the committee chair

::☐ A brief statement listing the goals or tasks assigned to the committee.

::☐ How other members can get involved.
5. Committee meetings must be posted on the calendar and announced on Slack.

6. Committees can appoint advisory members who are not members of PPM when necessary.

==Commercial Use==
Pikes Peak Makerspace is a great place to prototype, experiment, and develop your product ideas. When it comes to production runs, the priorities of the organization may require limiting access to the equipment for commercial ventures. The organization exists as a hackerspace and is not designed as a production shop.

The Pikes Peak Makerspace is based on open source ideals and thus encourages its membership to embrace those ideals as well, however members do reserve the rights to all of their creations.

==Loaning of Tools & Equipment to the Makerspace==
Members can give generously to PPM by donating or lending tools or equipment for use in the space.

'''''When equipment is loaned, the following conditions apply:'''''

1. All loaned equipment must be marked or labeled with the owner's name and two or more points of contact.

2. The owner must contact the Shop Operations Chair so that they can record the following information:
::☐ Name of owner
::☐ Equipment being loaned
::☐ Serial number if available
::☐ Terms or conditions of the loan
3. As the owner, if you must be contacted for others to use your tool, you must clearly document this requirement on the tool.

4. If a personal item on loan requires training to be used, training sessions must be offered at least once per month or the item will be subject to removal.

5. Equipment is loaned subject to the understanding that it is preferable for PPM to own their equipment, rather than borrow it. PPM may seek to buy equipment in order to replace loaned items, which are then returned.

6. Loaned items may be returned at any time, by request of the owner or as determined by the Shop Operations Committee.

7. PPM is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the Shop Operations Committee.

8. PPM is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.

==Prohibited Items==

===Firearms===
PPM members are prohibited from carrying, making, or cleaning firearms inside of the space. Additionally, firearm parts, ammunition, and modifications may not be done inside the space.

Objects that may be perceived as firearms must be cleared with the Executive Director and/or the Board of Directors.

===Deadly Weapons===
Any item intended to cause physical harm or destruction is prohibited at PPM. If you feel that the item you are making is a borderline case, please seek clarification from the Board of Directors before moving forward.

==Donations==
THIS POLICY TO BE UPDATED
#All donations must be approved by the committee/captain in charge of the location in which the item will be stored/used.
#The following items will not be accepted for donation:
#*CRT Monitors
#Financial donors may request the funds be used for a specific project or department.
#*Any agreement made will honor the request and allocate the money appropriately.
#*PPM reserves the right to return to the donor and ask for approval to reallocate the funds elsewhere.
#*The donor reserves the right to reject the request.

==Notes==
These notes are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.

==Additional Help==
'''Links to related PPM Wiki pages:'''
:'''[[How To Slack]]'''
:'''[[QR Codes]]'''

:[[Wood Shop|  '''Wood Shop'''  ]]

:[[Metal Shop|  '''Metal Shop'''  ]]

:[[Computers|  '''Computers — Windows'''  ]]

:[[Shed|  '''Shed'''  ]]

{{Template:Footer}}
   

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Rules and Policies

2024-12-29T14:47:14Z

Drew: /* How To Report Incidents */

'''Things to know about PPM - Pikes Peak Makerspace:'''
* We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region.

* We provide a facility with space and equipment for people to create physical items for fun and for education.

* PPM is also a place to gather interested people for all manner of classes and instruction.

* We are tapped into and support the Colorado Springs startup community.

* We are physically located in Colorado Springs, Colorado, USA.

* We are a 501(c)(3) non-profit organization, EIN (Tax ID Number): 81-0876257
 
{{Template:Contact Us}}

   
 
[[File:Burst.png|alt=burst of white rays on orange background|link=https://wiki.pikespeakmakerspace.org/index.php/About_PPM|right|frameless|250x250px]]

==Notice==
'''''These rules are subject to change at any time.'''''

==You need to read all the fine print ==
Access to Pikes Peak Makerspace (PPM) is a privilege, not a right. Members of PPM are responsible for following all applicable rules and policies listed on this page. Violation of PPM policies and procedures can result in consequences up to and including membership termination.

These Safety Policies and Procedures have been implemented to ensure safe operations of equipment, the operator, other members, and the integrity of the facility. All members are required to implement safety procedures while at PPM. Members should only use equipment for which they have been certified for by a trained PPM instructor. Violations of safety policies will be reviewed based on harm, potential harm, and recurrence. Consequences may result based on severity of the violation, as decided by the Executive Director and the Board of Directors based on the PPM Bylaws.

===Recording in Progress===
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===Rules and Policy Changes ===
These rules and policies are subject to change at any time. Changes adopted with a vote from the Board of Directors and/or the membership at a membership meeting will become effective immediately. A summarized version of newly adopted rule(s) will be posted in the space and updated on this page; adapted as necessary for effective communication.

==Standards of Behavior==
#All guests and members must follow the [https://wiki.pikespeakmakerspace.org/index.php/New_Member_Orientation#Member_Code_of_Conduct '''Member Code of Conduct.''']
#Safety is important, if you are unsure of how to safely do something, ask questions.
#The Executive Director or a member of the Board of Directors may ban anyone who violates the Rules and Policies from the premises or online systems. Bans may be appealed in accordance with the Bylaws.
# Don't merely respect each other; be excellent to each other.
#*We are all here to make things and learn. Every Maker is on their own journey.
#*Be helpful and answer questions when you can. If you don't know the correct answer, say so.
#Respect the space.
#* When you break something, own up to it. If you have any doubt about fixing it, ask for help.
#*Don't make someone feel bad for breaking things, help them understand what went wrong.
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.
#*Tools/resources are shared by all members and must stay on the premises at all times.
#Operate only those machines and equipment you have been specifically trained and certified to use by a PPM instructor.
# Members are not allowed to work in the Makerspace when intoxicated, under the influence of controlled substances, sleep deprived, or emotionally distressed.
# Sleeping is not cool, but naps are ok. We are not a hotel nor a place to hide out.
#All members are expected to maintain a safe and clean environment at all times.
#Smoking cigarettes, cigars or vaporizers is prohibited inside the building.
#Do not hack our computer systems. Do not to install unapproved or illegal software.
#Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.
#It is the responsibility of each member to help enforce the Standards of Behavior. If someone is violating the Member Code of Conduct or the Standards of Behavior, politely explain to them why their behavior is not acceptable. Egregious violations should be reported to the Executive Director or the Board of Directors.

===How To Report Incidents===
Should you have any concerns regarding member conduct that is inappropriate and does not represent what you expect at PPM, please use our '''[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Incident/Feedback Report Form]'''.

This form can be filled out with your name, or submitted anonymously. Your report will be received by all members of the Board and your concerns will be addressed. If you provide your contact information when submitting, you will receive a reply from the Board of Directors.

=== Please be sure to report the following types of incidents: ===

* Injury or close call
* Safety concern or hazard
* Members who break the rules
* Unwelcome or inappropriate behavior
* Anything you think the Board should know about

===Guests===
#Guests can not occupy the Pikes Peak Makerspace without another keyed Member present.
#Guests must sign the [https://app.waiverforever.com/pending/fjyagIyDaB1593209306 Waiver of Liability] before entering the building.
#Members may not have guests for the first 30 days.
#Guests are encouraged to become Members. A member referral bonus is available.
#Guests are not allowed to use tools and equipment, except as part of a scheduled class/workshop.
#Members are responsible for their Guest's actions, behavior, and safety.

===Minors===
#Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
#Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#*Limited circumstances means PPM-hosted family events, tours, or brief visits.
#*Accompanied closely means visual range generally, and never in the shop near dangerous tools.
#Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===Pets and Service Animals===
Pets are NOT allowed in common areas of the building.

Service animals are exempted.

== Anti-Harassment and Anti-Discrimination Policy ==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.

=== Reporting Concerns ===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:

==== 1. Anonymous Reporting Form: ====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.

==== 2. Direct Reporting Against a Board Member: ====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.

=== Response to Concerns ===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:

* Temporarily restricting participation of the individuals involved pending further review.
* Providing necessary support or resources to impacted members.
* Engaging external professionals or authorities if required.

'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.

=== Maintaining Confidentiality ===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.

=== Zero Tolerance for Retaliation ===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.

=== Education and Prevention ===
PPM recognizes the importance of prevention through education. We provide:

==== Training for Leadership: ====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.

==== Member Awareness: ====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.

== Membership Dues==
Members are responsible for managing their recurring payments and canceling their membership.

All dues are paid in advance and are recurring.

Monthly subscriptions must be paid by credit card.

Annual or Lifetime memberships can be paid by check or credit card.
{| class="wikitable"
|-
|'''Plan Name'''||'''Rate'''||'''Notes'''
|-
|'''Monthly Membership'''||$55/month||Our standard membership
|-
|'''2-Card Bundle'''
|$75/month
|Two memberships
|-
|'''Student Membership'''||$35/month||For members who are currently in school
|-
|
|
|
|-
|'''Annual Membership'''||$605/year||One month free ($55 x 11 months paid up front)
|-
|'''Annual 2-Card Bundle'''
|$825/year
|One month free ($75 x 11 months paid up front)
|-
|'''Lifetime'''||$5000||Non-transferable
|-
|
|
|
|-
|'''Corporate Membership'''
|
|Use our website to '''[https://pikespeakmakerspace.org/Contact Contact Us]'''
|-
|
|
|
|}

=== Payments ===
If your payment bounces, please take care of it immediately.

*Your payment method will be attempted 4 additional times over the course of 7 days.
*Do not use the space while your membership is past due.
*After 7 days, your membership will be cancelled and you will need to reactivate your membership to start over again.

=== How to cancel your membership ===
If you need to cancel your membership and stop the monthly payments, please do one of the following:

*Open the most recent payment receipt in your email inbox and use the link to login to your membership and cancel.
* Log in to Joinit.com with the credentials you used when signing up for your membership then cancel.
*'''[https://pikespeakmakerspace.org/Contact Contact Us]''' and a Director will assist you in cancelling your membership.

==Voting Rights==
#Members may vote on questions presented at Member Meetings of the Board of Directors.
#Please refer to the Bylaws for more detail about voting rights.

==Storage==

=== Dedicated Spaces===
A limited number of private dedicated spaces are currently in use. If you are interested in a dedicated workspace, please inquire about joining our waitlist. We are not a storage facility. Do not leave personal items and projects laying around in common areas.

'''''Additionally, observe the following storage policies:'''''

===Project Storage===
1. Projects must be actively attended to until completed and/or removed from the building.

2. Woodshop/Metal Shop projects may be kept on site for up to 7 days as long as the following conditions are met.
*Green Project Storage Tags must be used in the woodshop/metal shop.
* Projects must be stored out of the way. (under tables or in our shed, for example).
*After 1 week, you must either remove your project, or fill out a new green tag for another week. Additional weeks are a suggested $10 donation with a max of 4 total weeks.
*If your tag has expired, a PPM Deputy may reach out to you to remove your project.
*If one week has passed since contacting you and action has not been taken, your project will be considered abandoned and removed from site or the materials made available to other members
*Be sure your project storage tag is completely filled out with the following information
::☐ Name

::☐ Today's Date

::☐ Expected Completion Date

::☐ What I’m Making

::☐ Contact Info

3. On a case by case basis and as space allows, longer term storage may be approved by the Executive Director and/or Board of Directors.

===Personal Item Storage at Pikes Peak Makerspace===
Projects must be actively attended to until complete and/or stored appropriately in a designated ppm rentable storage area. Please observe the following storage policies which apply to all areas. Do not leave personal items and projects lying round in common areas; we are not a storage facility.

GREEN TAG your items if you are leaving temporarily; i.e BRB - had to run to the store to get more glue - be back in 20… that's okay, HOWEVER you must fill out a GREEN TAG and keep it CLEARLY by your project while it is momentarily unattended.

The time length of “momentarily” should be no more than a day. If extended time is unavoidable (waiting for shipping for more materials, etc) you must speak with the Executive Director about any rentable solutions available that will fit your project.

'''Current storage options available for members:'''

#Blue gym lockers - $10/mo - ideal for personal storage (jackets/small projects/personal items/backpacks/purses)
#Rollable Clear Tote Storage - $20/mo - ideal for medium to large size projects, materials, or personal tools
# COMING IN 2025: Woodshed XL storage - $10 for 7 days of holding - XL project storage ideal for glue-ups and large projects

'''Storage terms and conditions:'''

#Hazardous or flammable materials must be labeled and stored in the FLAME CABINET currently located in the vented room, absolutely no exceptions. Please do not forget to remove items once your rent term is complete, the flame cabinet is often forgotten when finishing projects and taking home materials.
#Please report any noticed damages of ppm provided storage solutions. Using slack, a direct message to the Executive Director would be the best person to contact about that.
# Lost locker keys; a lost key replacement fee will be charged to the renter if a replacement key is needed for the blue lockers
#Please don’t be the reason we add more terms and conditions.

==Inventory of Parts, Tools, and Equipment==
#Anything in a work area is available for use by all members unless otherwise documented/labeled.
#Items that require training may be secured, but a path to obtain use of said item should be documented.
#Consumables and other items of value should be reimbursed or a donation made for them.
# Items to be considered on display and not storage have to be in a designated area or approved by shop operations.

==Events==
#Scheduled events take priority over "first come, first serve".
#Scheduled events should align with the organizations goals.
#All events must be sponsored and attended by a current member.
#Donations to the space are encouraged but not required to hold events.
#Guest access to the facility will be limited, and guests may be required to sign waivers before attending the event.

===Classes===
Members are encouraged to seek assistance from and provided assistance to other members. Hosting classes is a great way to share skills and knowledge.

Instructors must follow the Member Code of Conduct as well as all Rules and Policies posted on this Wiki page.

Do not engage in any activity that unreasonably interferes with other member's usage of the space, regular scheduled events or reserved equipment.

'''Process for hosting a class:'''

Requests for the use of the space to hold classes can be made by:

- Filling out this [https://forms.gle/PTrNX9yfuq19F4mVA Event Planning Submission Form]

- Contacting Event Coordinators: Executive Director

- [https://pikespeakmakerspace.org/reserve Reserving the space on the reservation system]

Events or classes involving 5 or more people requires approval and reservation of the needed space/equipment.

Committee meetings and small gatherings between members is permitted in most cases without direct approval of the Executive team as long as abiding by the Member Code of Conduct and rules of the space.

One-on-one coaching, assistance or mentorship does not require prior approval.

Any member wishing to charge a fee for hosting a class must seek prior approval. Fees and promotions will be managed by PPM Event Administrators.

Instructors and PPM will share the revenue from the class. Instructors are compensated based on a sliding scale according to skill, time, effort, materials, usage of the space, equipment requirements, and/or other variables as determined by PPM Event Coordinators.

The final cost of the class and instructor compensation will be negotiated between the instructor and an Event Coordinator.
===Types of Organizational Meetings ===
#The Board of Directors holds regular meetings and will announce meetings via email and Slack. Members are welcome to attend.
#Classes may be organized and taught by any member in good standing.
#Community events should support the goals of Pikes Peak Makerspace.
#If an event requires funding, the event proposal form must be submitted.
#Membership meetings for projects and community building will be posted on the Pikes Peak Makerspace Events calendar and promoted on Slack.
#*Membership meetings should always include an act of service to the space such as cleaning or updating computers.

==Program Areas (Shops, Lasers, 3D Printing)==
Existing Program Areas should have designated Captains to perform critical maintenance and repair tasks.

A Captain is a volunteer position who keeps the program area in alignment with the goals of the organization and in line with all rules and procedures. There may be a Captain of an entire work area, or a Captain of just a particular tool.

The Captain serves as the main point of contact for the program area or tool.

If you are interested in becoming a captain, please contact the Executive Director or a member of the Shop Operations committee.

Please review [[Shared Tools and Map|'''Shared Tools and Map''']] for the current directory of PPM Program Areas.

==Committees==
Pikes Peak Makerspace is a volunteer-driven creative space. Everything good that happens is because a member or a committee saw the potential and took the initiative to make it happen.

===Member-Driven Committees===
Member-driven initiatives for new programs and work areas must meet the following criteria:

1. Project committees that impact the way the space operates must be approved by the Executive Director and/or the Shop Operations Committee.

2. Committee must select a chair persons as the primary point of contact and accountability.

3. The Committee chair person will be responsible for providing reports on the status and activities of the committee.

4. Each committee is expected to communicate activities to members via Slack, signage, or the wiki. The following information should always be kept current and available for all  members:
::☐ The name of the committee chair

::☐ A brief statement listing the goals or tasks assigned to the committee.

::☐ How other members can get involved.
5. Committee meetings must be posted on the calendar and announced on Slack.

6. Committees can appoint advisory members who are not members of PPM when necessary.

==Commercial Use==
Pikes Peak Makerspace is a great place to prototype, experiment, and develop your product ideas. When it comes to production runs, the priorities of the organization may require limiting access to the equipment for commercial ventures. The organization exists as a hackerspace and is not designed as a production shop.

The Pikes Peak Makerspace is based on open source ideals and thus encourages its membership to embrace those ideals as well, however members do reserve the rights to all of their creations.

==Loaning of Tools & Equipment to the Makerspace==
Members can give generously to PPM by donating or lending tools or equipment for use in the space.

'''''When equipment is loaned, the following conditions apply:'''''

1. All loaned equipment must be marked or labeled with the owner's name and two or more points of contact.

2. The owner must contact the Shop Operations Chair so that they can record the following information:
::☐ Name of owner
::☐ Equipment being loaned
::☐ Serial number if available
::☐ Terms or conditions of the loan
3. As the owner, if you must be contacted for others to use your tool, you must clearly document this requirement on the tool.

4. If a personal item on loan requires training to be used, training sessions must be offered at least once per month or the item will be subject to removal.

5. Equipment is loaned subject to the understanding that it is preferable for PPM to own their equipment, rather than borrow it. PPM may seek to buy equipment in order to replace loaned items, which are then returned.

6. Loaned items may be returned at any time, by request of the owner or as determined by the Shop Operations Committee.

7. PPM is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the Shop Operations Committee.

8. PPM is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.

==Prohibited Items==

===Firearms===
PPM members are prohibited from carrying, making, or cleaning firearms inside of the space. Additionally, firearm parts, ammunition, and modifications may not be done inside the space.

Objects that may be perceived as firearms must be cleared with the Executive Director and/or the Board of Directors.

===Deadly Weapons===
Any item intended to cause physical harm or destruction is prohibited at PPM. If you feel that the item you are making is a borderline case, please seek clarification from the Board of Directors before moving forward.

==Donations==
THIS POLICY TO BE UPDATED
#All donations must be approved by the committee/captain in charge of the location in which the item will be stored/used.
#The following items will not be accepted for donation:
#*CRT Monitors
#Financial donors may request the funds be used for a specific project or department.
#*Any agreement made will honor the request and allocate the money appropriately.
#*PPM reserves the right to return to the donor and ask for approval to reallocate the funds elsewhere.
#*The donor reserves the right to reject the request.

==Notes==
These notes are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.

==Additional Help==
'''Links to related PPM Wiki pages:'''
:'''[[How To Slack]]'''
:'''[[QR Codes]]'''

:[[Wood Shop|  '''Wood Shop'''  ]]

:[[Metal Shop|  '''Metal Shop'''  ]]

:[[Computers|  '''Computers — Windows'''  ]]

:[[Shed|  '''Shed'''  ]]

{{Template:Footer}}
   

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Rules and Policies

2024-12-29T14:41:14Z

Drew: /* Pets and Service Animals */

'''Things to know about PPM - Pikes Peak Makerspace:'''
* We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region.

* We provide a facility with space and equipment for people to create physical items for fun and for education.

* PPM is also a place to gather interested people for all manner of classes and instruction.

* We are tapped into and support the Colorado Springs startup community.

* We are physically located in Colorado Springs, Colorado, USA.

* We are a 501(c)(3) non-profit organization, EIN (Tax ID Number): 81-0876257
 
{{Template:Contact Us}}

   
 
[[File:Burst.png|alt=burst of white rays on orange background|link=https://wiki.pikespeakmakerspace.org/index.php/About_PPM|right|frameless|250x250px]]

==Notice==
'''''These rules are subject to change at any time.'''''

==You need to read all the fine print ==
Access to Pikes Peak Makerspace (PPM) is a privilege, not a right. Members of PPM are responsible for following all applicable rules and policies listed on this page. Violation of PPM policies and procedures can result in consequences up to and including membership termination.

These Safety Policies and Procedures have been implemented to ensure safe operations of equipment, the operator, other members, and the integrity of the facility. All members are required to implement safety procedures while at PPM. Members should only use equipment for which they have been certified for by a trained PPM instructor. Violations of safety policies will be reviewed based on harm, potential harm, and recurrence. Consequences may result based on severity of the violation, as decided by the Executive Director and the Board of Directors based on the PPM Bylaws.

===Recording in Progress===
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===Rules and Policy Changes ===
These rules and policies are subject to change at any time. Changes adopted with a vote from the Board of Directors and/or the membership at a membership meeting will become effective immediately. A summarized version of newly adopted rule(s) will be posted in the space and updated on this page; adapted as necessary for effective communication.

==Standards of Behavior==
#All guests and members must follow the [https://wiki.pikespeakmakerspace.org/index.php/New_Member_Orientation#Member_Code_of_Conduct '''Member Code of Conduct.''']
#Safety is important, if you are unsure of how to safely do something, ask questions.
#The Executive Director or a member of the Board of Directors may ban anyone who violates the Rules and Policies from the premises or online systems. Bans may be appealed in accordance with the Bylaws.
# Don't merely respect each other; be excellent to each other.
#*We are all here to make things and learn. Every Maker is on their own journey.
#*Be helpful and answer questions when you can. If you don't know the correct answer, say so.
#Respect the space.
#* When you break something, own up to it. If you have any doubt about fixing it, ask for help.
#*Don't make someone feel bad for breaking things, help them understand what went wrong.
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.
#*Tools/resources are shared by all members and must stay on the premises at all times.
#Operate only those machines and equipment you have been specifically trained and certified to use by a PPM instructor.
# Members are not allowed to work in the Makerspace when intoxicated, under the influence of controlled substances, sleep deprived, or emotionally distressed.
# Sleeping is not cool, but naps are ok. We are not a hotel nor a place to hide out.
#All members are expected to maintain a safe and clean environment at all times.
#Smoking cigarettes, cigars or vaporizers is prohibited inside the building.
#Do not hack our computer systems. Do not to install unapproved or illegal software.
#Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.
#It is the responsibility of each member to help enforce the Standards of Behavior. If someone is violating the Member Code of Conduct or the Standards of Behavior, politely explain to them why their behavior is not acceptable. Egregious violations should be reported to the Executive Director or the Board of Directors.

===How To Report Incidents===
Should you become injured, aware of a safety risk, or have any concerns regarding member conduct that is inappropriate and does not represent what you expect at PPM, please use our '''[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Anonymous Incident/Feedback Report Form]'''.

This form can be filled out with your name, or submitted anonymously. Your report will be received by all members of the Board and your concerns will be addressed. If you provide your contact information when submitting, you will receive a reply from the Board of Directors.

===Guests===
#Guests can not occupy the Pikes Peak Makerspace without another keyed Member present.
#Guests must sign the [https://app.waiverforever.com/pending/fjyagIyDaB1593209306 Waiver of Liability] before entering the building.
#Members may not have guests for the first 30 days.
#Guests are encouraged to become Members. A member referral bonus is available.
#Guests are not allowed to use tools and equipment, except as part of a scheduled class/workshop.
#Members are responsible for their Guest's actions, behavior, and safety.

===Minors===
#Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
#Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
#*Limited circumstances means PPM-hosted family events, tours, or brief visits.
#*Accompanied closely means visual range generally, and never in the shop near dangerous tools.
#Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

===Pets and Service Animals===
Pets are NOT allowed in common areas of the building.

Service animals are exempted.

== Anti-Harassment and Anti-Discrimination Policy ==
Harassment includes unwelcome conduct based on race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, or any other characteristic protected by law. Discrimination refers to unfair treatment based on these characteristics. Inappropriate behavior is any conduct that undermines the integrity, safety, or inclusivity of our community.

=== Reporting Concerns ===
PPM encourages members to report any incidents of harassment, discrimination, or inappropriate conduct. Members may report concerns in one of the following ways:

==== 1. Anonymous Reporting Form: ====
[https://docs.google.com/forms/d/e/1FAIpQLSdoOoYIllVrOIdg9Vs_QHg9csRkXtAPeBTVDu0fH0ZLCorZqw/viewform Complete our Anonymous Incident/Feedback Report Form]. This form can be submitted anonymously or with identifying information. Submissions are sent directly to all current Board of Directors (BOD) members for urgent and confidential review.

==== 2. Direct Reporting Against a Board Member: ====
Concerns involving a BOD member may be reported to the Executive Director or a trusted BOD member through email, Slack, or in person. The recipient will document the report and communicate it to the remaining BOD members, excluding the accused individual. The BOD will then investigate the matter and address any concerns directly with the accused member.

=== Response to Concerns ===
PPM is committed to responding promptly, confidentially, and effectively to all reports:

'''Urgent Matters:'''

Reports involving urgent matters, such as those that threaten the safety, well-being, or integrity of the community, will be addressed immediately upon receipt. The Board of Directors (BOD) will convene as soon as possible —ideally within 24 hours of receiving the report—to review the details and take appropriate action.

Immediate actions may include:

* Temporarily restricting participation of the individuals involved pending further review.
* Providing necessary support or resources to impacted members.
* Engaging external professionals or authorities if required.

'''General Concerns:'''

For non-urgent concerns, reports will be reviewed within (2) two business days to ensure all issues are addressed appropriately. If the reporting party provides contact information, they will receive an acknowledgment of their report and updates as the situation progresses.

'''Investigation:'''

The BOD (excluding the accused if applicable) will thoroughly review all reports, gathering statements and evidence as necessary.

'''Resolution:'''

Appropriate action will be taken based on the findings, which may include mediation, disciplinary measures, or other corrective steps to ensure the safety and inclusivity of the community.

'''Feedback (If Non-Anonymous):'''

When possible, and if contact information is provided, the reporting party will be informed of the outcome of the review.

=== Maintaining Confidentiality ===
All reports will be handled with the highest degree of confidentiality. Information will be shared only with those directly involved in addressing the concern.

=== Zero Tolerance for Retaliation ===
PPM strictly prohibits retaliation against any member who reports a concern or participates in an investigation. Retaliatory behavior will result in immediate action by the BOD.

=== Education and Prevention ===
PPM recognizes the importance of prevention through education. We provide:

==== Training for Leadership: ====
Board members and the Executive Director will receive periodic training on recognizing and addressing harassment.

==== Member Awareness: ====
Resources and clear guidelines will be available to all members to ensure understanding of their rights and responsibilities.

== Membership Dues==
Members are responsible for managing their recurring payments and canceling their membership.

All dues are paid in advance and are recurring.

Monthly subscriptions must be paid by credit card.

Annual or Lifetime memberships can be paid by check or credit card.
{| class="wikitable"
|-
|'''Plan Name'''||'''Rate'''||'''Notes'''
|-
|'''Monthly Membership'''||$55/month||Our standard membership
|-
|'''2-Card Bundle'''
|$75/month
|Two memberships
|-
|'''Student Membership'''||$35/month||For members who are currently in school
|-
|
|
|
|-
|'''Annual Membership'''||$605/year||One month free ($55 x 11 months paid up front)
|-
|'''Annual 2-Card Bundle'''
|$825/year
|One month free ($75 x 11 months paid up front)
|-
|'''Lifetime'''||$5000||Non-transferable
|-
|
|
|
|-
|'''Corporate Membership'''
|
|Use our website to '''[https://pikespeakmakerspace.org/Contact Contact Us]'''
|-
|
|
|
|}

=== Payments ===
If your payment bounces, please take care of it immediately.

*Your payment method will be attempted 4 additional times over the course of 7 days.
*Do not use the space while your membership is past due.
*After 7 days, your membership will be cancelled and you will need to reactivate your membership to start over again.

=== How to cancel your membership ===
If you need to cancel your membership and stop the monthly payments, please do one of the following:

*Open the most recent payment receipt in your email inbox and use the link to login to your membership and cancel.
* Log in to Joinit.com with the credentials you used when signing up for your membership then cancel.
*'''[https://pikespeakmakerspace.org/Contact Contact Us]''' and a Director will assist you in cancelling your membership.

==Voting Rights==
#Members may vote on questions presented at Member Meetings of the Board of Directors.
#Please refer to the Bylaws for more detail about voting rights.

==Storage==

=== Dedicated Spaces===
A limited number of private dedicated spaces are currently in use. If you are interested in a dedicated workspace, please inquire about joining our waitlist. We are not a storage facility. Do not leave personal items and projects laying around in common areas.

'''''Additionally, observe the following storage policies:'''''

===Project Storage===
1. Projects must be actively attended to until completed and/or removed from the building.

2. Woodshop/Metal Shop projects may be kept on site for up to 7 days as long as the following conditions are met.
*Green Project Storage Tags must be used in the woodshop/metal shop.
* Projects must be stored out of the way. (under tables or in our shed, for example).
*After 1 week, you must either remove your project, or fill out a new green tag for another week. Additional weeks are a suggested $10 donation with a max of 4 total weeks.
*If your tag has expired, a PPM Deputy may reach out to you to remove your project.
*If one week has passed since contacting you and action has not been taken, your project will be considered abandoned and removed from site or the materials made available to other members
*Be sure your project storage tag is completely filled out with the following information
::☐ Name

::☐ Today's Date

::☐ Expected Completion Date

::☐ What I’m Making

::☐ Contact Info

3. On a case by case basis and as space allows, longer term storage may be approved by the Executive Director and/or Board of Directors.

===Personal Item Storage at Pikes Peak Makerspace===
Projects must be actively attended to until complete and/or stored appropriately in a designated ppm rentable storage area. Please observe the following storage policies which apply to all areas. Do not leave personal items and projects lying round in common areas; we are not a storage facility.

GREEN TAG your items if you are leaving temporarily; i.e BRB - had to run to the store to get more glue - be back in 20… that's okay, HOWEVER you must fill out a GREEN TAG and keep it CLEARLY by your project while it is momentarily unattended.

The time length of “momentarily” should be no more than a day. If extended time is unavoidable (waiting for shipping for more materials, etc) you must speak with the Executive Director about any rentable solutions available that will fit your project.

'''Current storage options available for members:'''

#Blue gym lockers - $10/mo - ideal for personal storage (jackets/small projects/personal items/backpacks/purses)
#Rollable Clear Tote Storage - $20/mo - ideal for medium to large size projects, materials, or personal tools
# COMING IN 2025: Woodshed XL storage - $10 for 7 days of holding - XL project storage ideal for glue-ups and large projects

'''Storage terms and conditions:'''

#Hazardous or flammable materials must be labeled and stored in the FLAME CABINET currently located in the vented room, absolutely no exceptions. Please do not forget to remove items once your rent term is complete, the flame cabinet is often forgotten when finishing projects and taking home materials.
#Please report any noticed damages of ppm provided storage solutions. Using slack, a direct message to the Executive Director would be the best person to contact about that.
# Lost locker keys; a lost key replacement fee will be charged to the renter if a replacement key is needed for the blue lockers
#Please don’t be the reason we add more terms and conditions.

==Inventory of Parts, Tools, and Equipment==
#Anything in a work area is available for use by all members unless otherwise documented/labeled.
#Items that require training may be secured, but a path to obtain use of said item should be documented.
#Consumables and other items of value should be reimbursed or a donation made for them.
# Items to be considered on display and not storage have to be in a designated area or approved by shop operations.

==Events==
#Scheduled events take priority over "first come, first serve".
#Scheduled events should align with the organizations goals.
#All events must be sponsored and attended by a current member.
#Donations to the space are encouraged but not required to hold events.
#Guest access to the facility will be limited, and guests may be required to sign waivers before attending the event.

===Classes===
Members are encouraged to seek assistance from and provided assistance to other members. Hosting classes is a great way to share skills and knowledge.

Instructors must follow the Member Code of Conduct as well as all Rules and Policies posted on this Wiki page.

Do not engage in any activity that unreasonably interferes with other member's usage of the space, regular scheduled events or reserved equipment.

'''Process for hosting a class:'''

Requests for the use of the space to hold classes can be made by:

- Filling out this [https://forms.gle/PTrNX9yfuq19F4mVA Event Planning Submission Form]

- Contacting Event Coordinators: Executive Director

- [https://pikespeakmakerspace.org/reserve Reserving the space on the reservation system]

Events or classes involving 5 or more people requires approval and reservation of the needed space/equipment.

Committee meetings and small gatherings between members is permitted in most cases without direct approval of the Executive team as long as abiding by the Member Code of Conduct and rules of the space.

One-on-one coaching, assistance or mentorship does not require prior approval.

Any member wishing to charge a fee for hosting a class must seek prior approval. Fees and promotions will be managed by PPM Event Administrators.

Instructors and PPM will share the revenue from the class. Instructors are compensated based on a sliding scale according to skill, time, effort, materials, usage of the space, equipment requirements, and/or other variables as determined by PPM Event Coordinators.

The final cost of the class and instructor compensation will be negotiated between the instructor and an Event Coordinator.
===Types of Organizational Meetings ===
#The Board of Directors holds regular meetings and will announce meetings via email and Slack. Members are welcome to attend.
#Classes may be organized and taught by any member in good standing.
#Community events should support the goals of Pikes Peak Makerspace.
#If an event requires funding, the event proposal form must be submitted.
#Membership meetings for projects and community building will be posted on the Pikes Peak Makerspace Events calendar and promoted on Slack.
#*Membership meetings should always include an act of service to the space such as cleaning or updating computers.

==Program Areas (Shops, Lasers, 3D Printing)==
Existing Program Areas should have designated Captains to perform critical maintenance and repair tasks.

A Captain is a volunteer position who keeps the program area in alignment with the goals of the organization and in line with all rules and procedures. There may be a Captain of an entire work area, or a Captain of just a particular tool.

The Captain serves as the main point of contact for the program area or tool.

If you are interested in becoming a captain, please contact the Executive Director or a member of the Shop Operations committee.

Please review [[Shared Tools and Map|'''Shared Tools and Map''']] for the current directory of PPM Program Areas.

==Committees==
Pikes Peak Makerspace is a volunteer-driven creative space. Everything good that happens is because a member or a committee saw the potential and took the initiative to make it happen.

===Member-Driven Committees===
Member-driven initiatives for new programs and work areas must meet the following criteria:

1. Project committees that impact the way the space operates must be approved by the Executive Director and/or the Shop Operations Committee.

2. Committee must select a chair persons as the primary point of contact and accountability.

3. The Committee chair person will be responsible for providing reports on the status and activities of the committee.

4. Each committee is expected to communicate activities to members via Slack, signage, or the wiki. The following information should always be kept current and available for all  members:
::☐ The name of the committee chair

::☐ A brief statement listing the goals or tasks assigned to the committee.

::☐ How other members can get involved.
5. Committee meetings must be posted on the calendar and announced on Slack.

6. Committees can appoint advisory members who are not members of PPM when necessary.

==Commercial Use==
Pikes Peak Makerspace is a great place to prototype, experiment, and develop your product ideas. When it comes to production runs, the priorities of the organization may require limiting access to the equipment for commercial ventures. The organization exists as a hackerspace and is not designed as a production shop.

The Pikes Peak Makerspace is based on open source ideals and thus encourages its membership to embrace those ideals as well, however members do reserve the rights to all of their creations.

==Loaning of Tools & Equipment to the Makerspace==
Members can give generously to PPM by donating or lending tools or equipment for use in the space.

'''''When equipment is loaned, the following conditions apply:'''''

1. All loaned equipment must be marked or labeled with the owner's name and two or more points of contact.

2. The owner must contact the Shop Operations Chair so that they can record the following information:
::☐ Name of owner
::☐ Equipment being loaned
::☐ Serial number if available
::☐ Terms or conditions of the loan
3. As the owner, if you must be contacted for others to use your tool, you must clearly document this requirement on the tool.

4. If a personal item on loan requires training to be used, training sessions must be offered at least once per month or the item will be subject to removal.

5. Equipment is loaned subject to the understanding that it is preferable for PPM to own their equipment, rather than borrow it. PPM may seek to buy equipment in order to replace loaned items, which are then returned.

6. Loaned items may be returned at any time, by request of the owner or as determined by the Shop Operations Committee.

7. PPM is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the Shop Operations Committee.

8. PPM is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.

==Prohibited Items==

===Firearms===
PPM members are prohibited from carrying, making, or cleaning firearms inside of the space. Additionally, firearm parts, ammunition, and modifications may not be done inside the space.

Objects that may be perceived as firearms must be cleared with the Executive Director and/or the Board of Directors.

===Deadly Weapons===
Any item intended to cause physical harm or destruction is prohibited at PPM. If you feel that the item you are making is a borderline case, please seek clarification from the Board of Directors before moving forward.

==Donations==
THIS POLICY TO BE UPDATED
#All donations must be approved by the committee/captain in charge of the location in which the item will be stored/used.
#The following items will not be accepted for donation:
#*CRT Monitors
#Financial donors may request the funds be used for a specific project or department.
#*Any agreement made will honor the request and allocate the money appropriately.
#*PPM reserves the right to return to the donor and ask for approval to reallocate the funds elsewhere.
#*The donor reserves the right to reject the request.

==Notes==
These notes are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.

==Additional Help==
'''Links to related PPM Wiki pages:'''
:'''[[How To Slack]]'''
:'''[[QR Codes]]'''

:[[Wood Shop|  '''Wood Shop'''  ]]

:[[Metal Shop|  '''Metal Shop'''  ]]

:[[Computers|  '''Computers — Windows'''  ]]

:[[Shed|  '''Shed'''  ]]

{{Template:Footer}}
   

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Template:Scrap and Trash

2024-12-05T19:13:36Z

Drew:

'''Scrap and Trash'''
:Trash day is TUESDAY (Extra pickups can be called from Waste Connections for around $75)
:Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)
:Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
:Empty interior trash cans into our dumpster at the back (south side) of the building.

:'''''Always leave the space better than you found it.'''''

Template:Scrap and Trash

2024-12-05T19:13:13Z

Drew:

'''Scrap and Trash'''
:Trash day is TUESDAY (Extra pickups can be called for around $75)
:Recycling day is MONDAY (96 gallon tote should be placed out back by the dumpster)
:Single Stream Recycling provided by Waste Connections. Paper, cardboard, cans, glass, and one time use plastics.
:Empty interior trash cans into our dumpster at the back (south side) of the building.

:'''''Always leave the space better than you found it.'''''

Wood Shop

2024-12-04T14:50:40Z

Drew: /* Banned Materials */

[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2 and Level 3 equipment.'''

Additional PPM training and then PPM certification is required to use any of our Level 3 equipment.

Our trainers are passionate about sharing their knowledge and ensuring a positive learning experience for all.

We are grateful for their commitment and dedication to our community.

'''Wood Shop Area''' hand tools should be marked with '''green''' tape, paint, or powder coating.

The SawStop in the PPM Wood Shop cannot be turned on without scanning the RFID card of a certified member in our T.E.S.L.A. Access system.
 
 
{{Template:Contact Us}}

   
 
===Wood Shop Policy, Safety, and Orientation===
All Wood Shop users are required to follow all Wood Shop Policies and Safety Procedures.

'''Members are required to pass the Wood Shop Safety Quiz with 90% or better before attending the in-person orientation.'''

'''Emergency Safety''' - Review the Wood Shop layout to know the nearest emergency exits, eye wash, first aid kits, fire extinguishers, and breaker box in case of emergency.

*By using Pikes Peak Makerspace (PPM) you are agreeing to the shop policies and to operate equipment and use the space safely. Personal safety is your responsibility.
*Damage to tools, equipment, the shop itself caused by your actions is solely your responsibility.

'''Impairment''' - The use of the Wood Shop equipment requires you to be alert, attentive and focused.

*Do not use the Wood Shop, any PPM work area, or any PPM tools, if you are under the influence of drugs or alcohol.
*Likewise, ensure that you are well-rested and alert.

====Personal Protective Equipment (PPE)====

*'''Safety Glasses''' - Safety glasses are required when you are operating hand or stationary powered tools in the Wood Shop.
**'''Additionally, safety glasses are required if you are in the Wood Shop, and someone else is operating powered tools.''' (ANSI Z87.1-impact resistant) safety glasses are required. These are rated for impact protection and have side shields to provide protection from objects coming from the front and sides. Most prescription glasses are not impact resistant or provide side protection. If you use prescription glasses, then put an ANSI Z87-1 goggle over them.
*'''Hearing Protection''' - Hearing protection is required when you are operating stationary powered tools, or someone else is operating machinery in the Wood Shop. There are two types of hearing protection
**Soft Foam earplugs are available. To get the best protection roll the foam with your fingers to condense the plug. Pull the top of your ear up and back with the opposite hand, and insert the plug into your ear canal. Hold the plug with your finger for 20-30 seconds to let the plug expand and fill your ear canal. Your voice will sound muffled if the plug has a good seal.
**Ear muffs are available. These fit over both ears and have sound attenuating material and soft ear cushion to fit around the ears.
*'''Respiratory Protection''' - Particulate filter respirator should be used when significant wood dust is being generated (when emptying the dust collector).
*'''Shoes''' - Closed toe shoes are required. If working with heavy lumber, consider safety shoes (steel or composite) to protect your toes if materials or tools are dropped.
*'''Gloves''' - Gloves should not be worn when using powered equipment (saws, jointers, drills, or other equipment). Leather gloves can be worn for handling materials, but not when operating machinery.
*'''Hair and Clothing''' - There are many moving parts in the Wood Shop that can get caught and pull you into mechanical equipment. Tie back long hair when operating machinery. Also ensure that sleeves, hoodie strings, and any loose clothing is secured.
*'''Jewelry''' - Remove rings, bracelets and any other jewelry that could get caught when operating equipment.

====Hazards====
'''The following are a list of hazards that should be considered while working in the Wood Shop.'''
*'''Wood Dust''' - Exposure to wood dust has been associated with a variety of adverse health effects including dermatitis, respiratory effects and cancers. Engineering controls include local exhaust ventilation which removes dust at or near the source. To be effective the dust collection system needs to be maintained. Check and clean the dust collection system to ensure they are working properly. Additionally, particulate filters, or respirators can be worn to protect personnel directly.
*'''Noise''' - The machinery in the Wood Shop can exceed 85 decibels in noise. This can impair hearing if you are exposed to it over a sustained amount of time. Noise levels can be reduced by maintaining motors and moving parts in top operating conditions, reducing the speed of operation, ensuring the equipment frames are rigid and isolating noisy equipment on rubber footing. Additionally, hearing protection (ear muffs, and ear plugs) can be used to reduce individual exposure to loud noises while working in this area.
*'''Electrical Hazards''' - To minimize the danger of electrical hazards, machines must always be grounded, circuit breakers and fuse boxes labeled, cords, cables and plugs must be in good repair, and outlets and switches must be covered. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag on the equipment to prevent its use until it is repaired.
*'''Machine Maintenance''' - Equipment needs to be properly maintained to function safely. If there is any indication that the machine is not functioning properly, don’t use it. Report any unsafe condition found by using posting on #red-tags-issues on Slack and putting a filled out red-tag and/or lock-out/tag-out device on the equipment to prevent its use until it is repaired.
*'''Fire and Explosion''' - Woodworking facilities contain large quantities of fuel in the form of woods, wood products, and sawdust, (and also paints, oils finishes, solvents, and other flammable liquids). Sawdust can ignite and burn far more easily than whole pieces of lumber. Regular maintenance must be done to ensure that dust is not accumulating in the area.

*Electrical panels must be kept clear.
*Fire extinguishers and exit routes must always be accessible.
* It is important for every user to ensure that they perform effective clean-ups of the equipment and the area to reduce the build up of wood dust, the separation of flammable materials, the proper maintenance of equipment.

====Reporting Issues====

=====Injuries=====
'''If there is a personal injury requiring medical attention, dial 911 and obtain medical treatment.'''

'''Report any accidents or personal safety issues (including near-misses) as soon as possible with one of these methods:'''
*Call 719-445-MAKE(6253) and leave a detailed message including:
   ☐ Your name and phone number

   ☐ Who was injured and their phone number

   ☐ Describe the injury, part of body

   ☐ Detail what type of medical attention was sought

   ☐ Describe how the accident occurred

   ☐ Include the equipment that was being used

*Send a direct message to our Executive Director on Slack
*Use the form on the PPM website to [https://pikespeakmakerspace.org/Contact '''Contact Us''']
**Include all the same information listed in the checklist above

'''Equipment Issues'''

'''Red-Tag Equipment''' – If equipment needs repairs, place a red-tag on it and report it via the Pikes Peak Makerspace Slack, #red-tags-issues channel. This advises others on the malfunctioning equipment and ensures that actions can be taken to service/repair the equipment.

=====Red Tags=====
:'''•''' Any damage to tools or broken equipment MUST be reported in a direct message to an Area Deputy or our Director.
:'''•''' Use a '''[[New Member Orientation#Red Tags|Red Tag]]''' to designate the broken equipment.
:'''•''' Additionally, report the issue in our Slack #red-tags-issues channel.

====Equipment Information====
:'''Be knowledgeable about the equipment that you are using.'''

=====Laminated Placards=====
* There are laminated placards with detailed equipment information hanging on each of the large Wood Shop power equipment. These can also be found in the PPM Wiki under Wood Shop- Training ("PPM Jointer Safety and Operations", for example)
*More detailed information can be found on the PPM Wiki/Wood Shop page. Vendor supplied Operation, Instruction, and parts lists can be found as links on that page. Most equipment manuals have specific information on capabilities, maintenance, adjustments, and parts lists. Use the specific equipment manual for setup, changing blades, auxiliary attachments, alignments, and general maintenance.

=====Getting Help=====
*Use the #wood-shop channel on Slack to get help with specific equipment.
*Utilize tutorial videos on-line that provide general information on many of the Wood Shop tools, techniques, and safeguards.

====Dust Collection and Air Handler====
'''Woodworking creates wood chips, dust and fine dust. There are three reasons for dust collection.'''
*'''Fine particulate matter''' is a health hazard that can be a respiratory irritant in the near-term, and a more serious health condition with long-term exposure.
*'''Fire Danger''' – A Wood Shop without dust collection has combustible dust everywhere, floors, tools, light fixtures, machinery housing, furnaces, and electrical boxes. Dust increases the chance for a fire start or acceleration if in contact with heaters, hot fixtures, machine housings, and other sources.
*'''Annoyance''' – True craftsmen work to precision high quality standards. Chips and dust can impact accuracy, joinery, final finishes, and the quality of the final product. Dust in machinery means more maintenance is needed. Plus, people prefer to work in clean environments.

====Reclaimed Materials Usage====
=====Use Metal Detector=====
Scan the Wood for Metal - Use a hand-held metal detector wand on all reclaimed wood stock. It will locate remaining screws, nails and other metal parts. Any identified metal needs to be removed prior to cutting or shaping on woodworking equipment.

=====Upcycled Wood=====
Don’t bring any wood that has lead paint, bugs, or toxic materials to PPM Wood Shop. Paint must be removed prior to bringing to PPM for any up-cycled lumber project. Many pallets are treated with toxic pesticides, such as methyl bromide. Additionally, there can be residuals of toxic chemicals left on pallets, or bacteria from food shipments.

'''Here are some resources about reclaimed wood:'''

'''https://earth911.com/health/how-to-safely-use-pallet-wood/'''

'''https://rockinwoodusa.com/is-reclaimed-wood-safe/'''

Recycling wood has ecological and aesthetic value. But, only if it is not exposing you and PPM members to hazardous materials.

====Acceptable Materials====
The equipment in the Wood Shop is configured with blades and bits for working with the following materials:
*Solid wood
*Plywood
*MDF (Medium Density Fiberboard)
*Upcycled/recycled wood (see caution on use above)
'''Banned Materials'''
*Metals
*Composite decking material ("Trex", for example - requires a special blade and will quickly dull standard woodworking blades)
'''Plastics & Resin'''

It is important to research all materials before cutting and take precautions to ensure there are no harmful fumes released and no chips blocking the tool's functionality or the dust collection ability.

===== Paint or Solvents=====
Do not apply Paints or Solvents in the Wood Shop. There are too many combustible materials and the odor is bothersome.

*Use the ventilated room, outdoors, or other location for applying paints or solvent-based finishes.

====Check-in/ Check-out form====
'''All woodshop users are required to use the Check-in/ Check-out form when using the shop areas.'''

====Project Storage====
Project storage is extremely limited and therefore must be carefully managed. Keep your project out of the way, and do not leave it unattended for multiple days or it is subject to removal.

'''All projects left in the woodshop must be labeled with green Project Storage tags.'''

====Clean-up====
If you do not have time to clean up, you do not have time to build it.

'''Woodworking projects tend to have 3 parts:'''
:'''“Plan it. Build it. Clean up after it.”'''

☐ Clean up the area and equipment that you used.

☐ All equipment should be ready for the next member to use right away.

☐ Return all hand tools to their proper location after use. If you don't know where it goes, ask an Area Deputy. This rule applies to all areas of our Makerspace.

☐ Go to the '''Cleaning Sequence''' sheets hanging on the Wood Shop door:

=====Cleaning Sequence (Required)=====
To ensure that the deep cleaning of the space is maintained, all members are required to do a cleaning task from the sequence flip chart.

If you have comments about the cleaning sequence, leave a note on the Check-out form.

==Classes==
:'''Woodshop Orientation & SawStop Certification:'''
::A combo class designed for new-to-woodshop members is offered twice per month on Saturday mornings.
::Sign up for upcoming classes on Meetup! [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']

==PPM Training==
:If you need help with a tool or technique, use the #wood-shop channel on Slack.
:'''[[Woodworking terminology]]'''
:[[Introduction to Woodworking‏‎|'''Introduction to Woodworking‏‎''']]

==Tips==
'''Links to external sites:'''
:'''[https://powermatic.com/manuals POWERMATIC MANUALS]'''
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking Our wood working-related books]''' — on LibraryThing.com

==Equipment Lists==

===POWERMATIC Equipment List===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
| Model Number
|Power Requirements
|Resources
|Training Video Link
|-
|[[File:3520B POWERMATIC lathe.jpg|alt=3520B POWERMATIC lathe|center|frameless|150x150px]]
| '''Woodturning Lathe,'''
'''18" extension, swing away tail stock, ONEWAY bowl chuck''' 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]] 
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC 3520B
|Single Phase,
220V, 60Hz, 6.2A
|[https://s3.amazonaws.com/jpw-assets/1/b/8/2/1b82ad72ffa4bfbe3be47b5c32268210eaf6b0b9_1352001_man_en.pdf '''Operating Instructions and Parts Manual''']
|
|-
|[[File:POWERMATIC bandsaw big.jpg|alt=PWBS-14 POWERMATIC bandsaw|center|frameless|150x150px]]
|'''14" Woodworking Band Saw,'''
'''rip and cross-cut fences, 5" riser''' 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC PWBS‑14
|Single Phase,
115V, 60Hz, 11A
|'''[https://s3.amazonaws.com/jpw-assets/7/5/7/b/757bf184f70226a8e2aa6c502c51c213b78ecac4_1791216k_man_en.pdf Operating Instructions and Parts Manual]'''
|
|-
|[[File:POWERMATIC planer.jpg|alt=15HH POWERMATIC planer|center|frameless|150x150px]]

|'''15-inch Planer,'''
'''4" Dust Port''' 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC 15HH
|Single Phase,
230V, 60Hz, 15A
|'''[https://s3.amazonaws.com/jpw-assets/e/5/6/7/e5672c0ae446a5b84cf56a662cc41763b8c40945_1791213_man_en.pdf Operating Instructions and Parts Manual]'''
|
|-
|
|
|
|
|
|
|
|-
|
|'''6" Belt/ 12" Disc Combination Sander''' 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[[File:Powermatic-logo.png|alt=Powermatic-logo|left|frameless|120x120px]]
|POWERMATIC 30B
|3-phase
|[https://www.ereplacementparts.com/powermatic-30b-combination-belt-and-disc-sander-parts-c-32549_32557_289690.html '''Replacement Parts''']
|
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|
|
|}
<gallery widths="200" heights="125">
File:Lathe chuck.jpg|alt=Lathe chuck|'''Lathe chuck'''
File:Lathe tools.jpg|alt=Lathe tools|'''Lathe tools'''
</gallery>

===Sharpening and Sanding Equipment List===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Model Number
|Resources
|-
|[[File:Grinder station.jpg|alt=Grinder station|center|frameless|150x150px]]
|'''8" bench grinder, blue and white grinding stones, Wolverine and Veritas sharpening devices, buffing wheel and compounds'''
|[https://jettools.com/woodworking/ JET]
|JET
JWBG‑8 
|[[File:Wolverine Dressing Jig Instructions.pdf|alt=Wolverine Dressing Jig Instructions|center|frameless|129x129px]]
|-
|
|'''variable speed buffer and buffing wheels'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
|DeWALT
DWP849
|
|-
|
|'''sanding belts, disks and sheets'''
|[[File:3M logo.gif|alt=3M logo|left|frameless|33x33px|3M logo]]
|3M

|
|-
|
|
|
|
|
|-
|[[File:Granite block.jpg|alt=Granite block|center|frameless|133x133px]]
|'''precision ground granite block, 12"x18"x3"'''
|
|
|
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|}

:'''Do not store tools, or anything, on our granite block to avoid damage to its surface.'''

===Wood Shop Equipment List===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Model Number
|Power Requirements
|Resources
|-
|[[File:JET Jointer.jpg|alt=JET Jointer|center|frameless|JET Jointer|150x150px]]
|'''8" Jointer with Shelix cutting head,'''
'''2 HP Motor'''
|JET
|JJ-8CS
|single phase,
110 Volts,

15 Amps,

60HZ
|[https://jettools.com/woodworking/ JET]
|-
|[[File:Miter saw with new dust hood.jpg|alt=Miter saw with new dust hood|center|frameless|133x133px]]
|'''12" Sliding Compound'''
'''Miter Saw, dust hood & RIGID vacuum'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|50x50px]]
|DeWALT DW708
|single phase,
110 Volts,

13 Amps,

60HZ
|
|-
|[[File:WORK SHARP sharpener.jpg|alt=WORK SHARP sharpener|center|frameless|150x150px]]
|'''wood tool sharpener'''
|WORK SHARP
|WS3000
|single phase,
110 Volts,

2 Amps,

60HZ
|
|-
|[[File:DELTA Router Table.jpg|alt=DELTA Router Table|center|frameless|150x150px]]
|'''Router and Shaper with bits on rolling carts'''
|DELTA
|
|single phase,
110 Volts,

9 Amps,

60HZ
|
|-
|
|'''Floor drill press'''
|PORTER-CABLE
|
|single phase,
110 Volts,

8 Amps,

60HZ
|[https://www.portercable.com/solutions/woodworking-tools PORTER-CABLE]
|-
|
|'''6" Disk 4" Belt Sander'''
|WEN
|6502T
|single phase,
110 Volts,

4.3 Amps,

60HZ
|[https://wenproducts.com/collections/power-tools WEN]

[https://wenproducts.com/products/wen-6502t-4-3-amp-4-x-36-in-belt-and-6-in-disc-sander 6502T]
|-
|
|'''1" x 30" belt & 5" disk sander'''
|Dremel
|
|single phase,
110 Volts,

3 Amps,

60HZ
|
|-
|
|
|
|
|
|
|-
|[[File:BAYLEIGH AIR FILTRATION.jpg|alt=BAYLEIGH AIR FILTRATION SYSTEM|center|frameless|150x150px]]
|'''AIR FILTRATION SYSTEM'''
'''with remote'''
|BAILEIGH
|AFS-2400
|single phase,
110 Volts,

14 Amps,

60HZ
|[https://www.baileigh.com/ BAILEIGH]

[https://www.baileigh.com/air-filtration-system-afs-2400 AFS-2400]
|-
|[[File:Box fan.jpg|alt=Box fan|center|frameless|140x140px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Box_fan.jpg]]
|'''Box fan,'''
'''20", 3-speed'''
|LASKO
|
|
|
|-
|
|'''Dust Collector 1.5HP 6" inlet'''
|DELTA
|
|
|[https://deltamachinery.com/products/ DELTA]
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|
|}

<gallery widths="200" heights="125">
File:Cable management.jpg|alt=Wood Shop Cable Management|'''Cable Management by Nick Hopkins (11/06/22)'''
File:AFS-2400 nameplate.jpg|alt=AFS-2400 nameplate|'''AFS-2400 nameplate'''
File:Bench grinder.jpg|alt=Bench grinder|'''Bench grinder'''
</gallery>

===Power Tools===
'''<nowiki/>'A Tool Is Just An Opportunity With A Handle' ~Kevin Kelly'''
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Model Number
|Resources
|Owner
|-
|[[File:Compact Router.jpg|alt=Milwaukee Compact Router|center|frameless|120x120px]]
|'''COMPACT ROUTER'''
'''M18 FUEL'''
|[[File:Milwaukee tool logo.png|alt=Milwaukee tool logo|left|frameless|75x75px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Milwaukee_tool_logo.png]]
| Milwaukee
2723-20
|[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2723-20 2723-20]
[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
|
|-
|[[File:JIG SAW Milwaukee.jpg|alt=JIG SAW Milwaukee|center|frameless|130x130px]]
|'''JIG SAW'''
'''M18 FUEL'''

'''D-Handle'''
|[[File:Milwaukee tool logo.png|alt=Milwaukee tool logo|left|frameless|75x75px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Milwaukee_tool_logo.png]]
|Milwaukee
2737-20
|[https://www.milwaukeetool.com/Products/Power-Tools/Woodworking/Jig-Saws/2737-20 2737-20]
[https://documents.milwaukeetool.com/58-14-2745d4.pdf OPERATOR'S MANUAL]
|PPM
|-
|[[File:Makita Circular Saw.jpg|alt=Makita Circular Saw|center|frameless|120x120px]]
|'''Circular Saw,'''
'''185mm'''
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
|Makita
5007NB
|[https://www.makitatools.com/products/details/5007NB 5007NB]
[https://www.makitatools.com/products/details/5007NB product detail on makita.com]
|
|-
|[[File:Makita Router 3601B.jpg|alt=Makita Router 3601B|center|frameless|120x120px]]
|'''Router'''
|[[File:Makita-Logo-01.png|alt=Makita logo|left|frameless|75x75px]]
|Makita
3601B

|[https://www.makita.com.sg/wp-content/uploads/2020/08/3601B_Manual.pdf INSTRUCTION MANUAL]
|
|-
|[[File:DeWALT sawsall.jpg|alt=DeWALT sawsall|center|frameless|120x120px]]
|'''RECIPROCATING SAW'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
|DeWALT
DW304P
|
|
|-
|[[File:DeWALT jigsaw.jpg|alt=DeWALT jigsaw|center|frameless|120x120px]]
|'''JIG SAW'''
|[[File:Logo DeWALT.png|alt=Logo DeWalt|left|frameless|75x75px]]
|DeWALT
DW331
|
|
|-
|[[File:BOSCH jigsaw 1590EVS.jpg|alt=BOSCH jigsaw 1590EVS|center|frameless|120x120px]]
|'''Jig Saw'''
|BOSCH
|BOSCH
1590EVS
|
|
|-
|[[File:AIR NAILER.jpg|alt=AIR NAILER|center|frameless|104x104px|AIR NAILER]]
|'''AIR NAILER/'''
'''STAPLER'''
|CENTRAL PNEUMATIC
|64269
|[https://www.harborfreight.com/18-gauge-2-in-1-air-nailerstapler-68019.html 64269]
|
|-
|[[File:Biscuit Joiner In Red Case.jpg|alt=Biscuit Joiner In Red Case|center|frameless|150x150px]]
|'''Biscuit'''
'''Joiner'''
|Craftsman
|
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|
|-
|
|'''Circular'''
'''Saw'''
|Craftsman
|
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|
|-
|
|
|
|
|
|
|-
|[[File:Sander PORTER-CABLE.jpg|alt=Sander PORTER-CABLE|center|frameless|133x133px]]
|'''Orbital Sander'''
|PORTER-CABLE
|Quicksand
|
|
|-
|[[File:Sander Mouse.jpg|alt=Sander Mouse|center|frameless|133x133px]]
|
'''Mouse Sander/Polisher'''
|[[File:Logo BLACK&DECKER.png|left|frameless]]
|BLACK&DECKER
FMS50
|
|
|-
|
|'''Belt Sander'''
'''(handheld)'''
|Craftsman
|
|[https://www.sears.com/tools-craftsman-tools/b-1324478419?sortOption=UNITS_HIGH_TO_LOW Craftsman]
|
|-
|
|'''Belt Sander'''
'''(handheld)'''
|[[File:Logo RYOBI.png|alt=Logo RYOBI|left|frameless|65x65px]]
|RYOBI
|
|
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|
|}

===Clamps===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Item
|Manufacturer
|Model
|Quantity
|Owner
|-
|'''6" Wooden Handscrew Clamps'''
|ROCKLER
|[https://www.rockler.com/wooden-handscrew-clamps-clamps Wooden Handscrew Clamps]
|2
|PPM
|-
|'''8" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
Quick Grip
|2
|PPM
|-
|'''12" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
Quick Grip
|2
|PPM
|-
|'''36" Quick Clamp'''
|Irwin
|[https://www.irwintools.com/products/hand-tools Irwin]
Quick Grip
|1
|'''Bill Epperson'''
|-
|'''30" Pipe Bar Clamp'''
|Bessey
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|4
|'''Bill Epperson'''
|-
|'''48" Pipe Bar Clamp'''
| Bessey
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|2
|'''Bill Epperson'''
|-
|'''60" Pipe Bar Clamp'''
|Bessey
|[https://www.bessey.de/en-us/bessey-tools-north-america BESSEY Tools North America]
|2
|'''Bill Epperson'''
|-
|'''36" Quick Release Steel Bar Clamp'''
|Jorgensen
|CABINET MASTER 8036
|5
|PPM
|-
|'''6" Quick Release Bar Clamp'''
|
|
|2
|'''Bill Epperson'''
|-
|'''12" Quick Release Bar Clamp'''
|
|
|0
|PPM
|-
|'''18" Quick Release Bar Clamp'''
|
|
|0
| PPM
|-
|'''24" Quick Release Bar Clamp'''
|
|
|2
|PPM
|-
|'''30" Quick Release Bar Clamp'''
|
|
|0
|PPM
|-
|'''36" Quick Release Bar Clamp'''
|
|[https://www.harborfreight.com/36-in-aluminum-bar-clamp-60539.html ITEM 60539]
|6
|PPM
|-
|'''60" Quick Release Bar Clamp'''
|
|[https://www.harborfreight.com/60-in-aluminum-f-style-bar-clamp-60673.html ITEM 60673]
|2
|PPM
|-
|'''50" CLAMP & CUT EDGE GUIDE'''
|
|[https://www.harborfreight.com/50-inch-clamp-and-cut-edge-guide-66581.html ITEM 66581]
|1
|PPM
|-
|'''6" Ratcheting Bar Clamp'''
|
|
|0
|PPM
|-
|'''12" Ratcheting Bar Clamp'''
|
|
|6
|PPM
|-
|'''24" Ratcheting Bar Clamp'''
|
|
|0
|PPM
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|}

===Hand Tools===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; background-color:#3DA942; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Owner
|-
|
| '''Dead Blow Hammer'''
''' '''
|
|PPM
|-
|
|
|
|
|-
|[[File:Wood clamp donation.jpg|alt=Wood clamp donation|center|frameless|160x160px]]
|'''Wood Clamps'''
|
|PPM
|-
|[[File:Ten mill stick.jpg|alt=Ten million dollar stick|center|frameless|150x150px]]
|'''10 Million Dollar Stick'''
|
|PPM
|-
|[[File:Forstner bit set.jpg|alt=Forstner bit set|center|frameless|150x150px]]
|'''Forstner bit set'''
'''(16 bits)'''
|
|PPM
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|}

:'''Wood Shop Area''' hand tools should be marked with '''green''' tape or paint or powder coating.
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.

==Benefits==
{{Member Benefits}}

==Donate for Materials and Consumables==
Donated materials are available for member use, but should be compensated for by making a donation through one of the following methods:
:'''Donate via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box.'''
==Related Pages==
'''Links to related PPM Wiki pages:'''

:[[Wood_Shop_--_SawStop|  '''Wood Shop — SawStop'''  ]]
:[[Wood Shop — Festool power tools|  '''Wood Shop — Festool power tools'''  ]]

:[[CNC|  '''CNC Router Table'''  ]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''

:[[Metal_Shop|  '''Metal Shop'''  ]]

:[[Vented_Room|  '''Vented Room'''  ]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''

:[[Shed|  '''Shed'''  ]]

:'''[[Autodesk Fusion Tips]]'''
:'''[[VCarve Tips]]'''
:'''[[Inkscape Tips]]'''
:'''[[QR Codes]]'''

==Hand-Curated Links==
'''Links to member-recommended external sites:'''
:'''[https://colowood.com/index.php Colorado Woodworkers' Guild]''' — learn and share information about woodworking
:'''[https://www.youtube.com/user/StumpyNubsWorkshop/videos Stumpy Nubs Woodshop]''' — on YouTube
:'''[https://owwm.org/ Old Woodworking Machines (OWWM)]'''

==For Additional Help==
:Use the PPM Slack channel #wood-shop
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.

{{Template:Footer}}
{{Template:Ideas into reality}}

About PPM

2024-11-06T14:43:49Z

Drew: /* Board of Directors */

'''Things to know about PPM - Pikes Peak Makerspace:'''
:☐ We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region.

:☐ We provide a facility with space and equipment for people to create physical items for fun and for education.

:☐ PPM is also a place to gather interested people for all manner of classes and instruction.

:☐ We are tapped into and support the Colorado Springs startup community.

:☐ We are physically located in Colorado Springs, Colorado, USA.

:☐ We are a 501(c)(3) non-profit organization, EIN (Tax ID Number): 81-0876257
 
{{Template:Contact Us}}

   
 
[[File:Burst.png|alt=Welcome banner|link=https://wiki.pikespeakmakerspace.org/index.php/About_PPM|right|frameless|250x250px]]

==Maker Definition==
:'''A maker is someone who defines themselves by their ability to turn ideas into reality through creativity, innovation, and hands-on skills.'''

:Makers are typically driven by a desire to create and solve problems, using tools, materials, and technology to bring their visions to life. They often have a passion for a particular field or hobby, such as woodworking, electronics, or crafting, and may be self-taught or have formal training in their area of expertise. Makers take pride in their ability to think outside the box and find unique solutions to challenges, often experimenting with new techniques and materials to achieve their goals. They collaborate with other makers, sharing ideas and knowledge to create something greater than what they could achieve alone. Overall, being a maker is more than just a hobby or profession - it is a mindset and a way of life that values creativity, ingenuity, and hands-on problem-solving.

==PPM Mission Statement==
:Pikes Peak Makerspace (PPM) is a community of cooperative hobbyists and early-stage entrepreneurs that empowers members to turn ideas into reality. We strive to provide access to tools and resources to confidently and safely design, develop and make.

==PPM Vision Statement==
: We exist to catalyze positive change, drive economic growth and social progress by empowering individuals to unleash their full potential.
: We imagine a future where Pikes Peak Makerspace is the go-to destination for '''*makers*''' in the Pikes Peak Region seeking access to resources and knowledge, enabling them to turn their concepts into reality.
:Through our commitment to fostering a supportive, inclusive, and collaborative community, we will continue to expand our assets and capabilities to meet the evolving needs of the members.

==Official PPM Logo==
[[File:1_to_1_logo.png|alt=official PPM logo|frameless|200x200px]]

==PPM Logo Usage==
Gears are a common element of many other Makerspace logos, and for us it is also a subtle hat tip to the Pikes Peak Cog Railway.

'''''Follow these simple guidelines, and always use our logo consistently:'''''

'''Animation'''
* Do not animate as a gear or wheel
* Bouncing animation as computer screen saver probably OK

'''Background'''
* Our logo should appear on a plain background
* Can appear on a colored background (such as a color from a PPM Tool Area)
* Need clear space around our logo to avoid confusion
* May use logo within QR Code

'''Color'''
* Reproduce in black or "rich black"
* Can be white (reversed)

'''Design'''
* Do not alter our logo (number of "teeth", wording, font, or any design element).
* Maintain proportion (do not scale or skew)
* Do not attach the logo to other artwork or other wording

'''Maintenance:'''
* Replace damaged logos (especially signage)

'''Reproduction at PPM:'''
* Our logo can be reproduced at PPM to demonstrate our equipment/capabilities; for example:
3D Printers, CNC Router Table, Vinyl Cutter, Large Format Printer, Sublimation Printer, and other equipment.

'''''Our organization's name can be shortened to PPM, but not PPMS. (We use "Makerspace" as one word — not two.)'''''

== AI Generated Content==
AI generated content on this Pikes Peak Makerspace (PPM) Wiki will be labeled as such, to the extent possible.

Additionally, we are anticipating that AI “chat” interfaces for searching will become increasingly common,
so we will be continually improving content here to stay current and remain useful to both members and non-members.

Our social media sites and communication materials may have individual procedures and goals at this time.

==PPM Contact Information==
{| class="wikitable"
|'''Item'''
|'''Link'''
|'''Date'''
|-
|'''This Wiki'''
|https://wiki.pikespeakmakerspace.org
|'''November 2021'''
|-
|'''website'''
|https://pikespeakmakerspace.org
|
|-
|'''contact form'''
|https://pikespeakmakerspace.org/Contact
|
|-
|'''donation form'''
|https://pikespeakmakerspace.org/support-us
|
|-
|
|
|
|-
|'''phone'''
|719-445-MAKE (6253)
''Please leave a detailed message,''

''which will be translated to email.''
|
|-
|
|
|
|}
{| class="wikitable"
|'''Item'''
|'''Address'''
|'''Date'''
|-
|'''physical location'''
|
735 East Pikes Peak Avenue Colorado Springs, CO 80903
|'''2016'''
|-
|
|
|
|}
===[[New Member Orientation#Managing your Membership|Managing your Membership]]===
===[[How To Slack]]===

==PPM Social Media Links==
{| class="wikitable"
|+
|'''Service'''
|'''Link'''
|'''Date Joined'''
|-
|'''Linktree'''
|'''https://linktr.ee/pikespeakmakerspace'''
|'''March 2023'''
|-
|
|
|
|-
|'''Etsy'''
|'''https://www.etsy.com/ie/shop/PikesPeakMakerspace'''
|'''2022'''
|-
|'''Linkedin'''
|'''https://www.linkedin.com/company/pikes-peak-makerspace'''
|
|-
|
|
|
|}

==Other Links==
{| class="wikitable"
|'''Logo'''
|'''Link /''' '''Description'''
|'''Date Joined'''
|-
|[[File:King Soopers logo.png|alt=King Soopers logo|frameless|100x100px]]
|'''https://www.kingsoopers.com/account/communityrewards'''
[https://wiki.pikespeakmakerspace.org/index.php/File:King_Soopers_Community_Rewards.pdf '''King Soopers Community Rewards.pdf''']

"King Soopers makes donating easy by simply grocery shopping."

''Both Members and non-members can support PPM (easily)!''

[https://www.kingsoopers.com/stores/grocery/co/colorado-springs '''Kingsoopers has 11 grocery stores in Colorado Springs''']
|'''02/19/23'''
|-
|[[File:Amazon.png|alt=Amazon logo|frameless|100x100px]]
|'''[https://www.amazon.com/hz/wishlist/ls/2GLGQDTSNNZM4/ref=hz_ls_biz_ex Our Amazon Wishlist]'''
''Support PPM with a purchase from Amazon.''

|'''08/22/22'''
|-
|
|
|
|-
|[[File:Logo ebay.png|alt=ebay logo|frameless|90x90px]]
|'''https://www.ebay.com/usr/pikespeakmakerspace'''
''"ecommerce experiences for buyers, sellers and developers"''
|'''09/22/16'''
|-
|
|
|
|}

:'''[https://downforeveryoneorjustme.com/ Check if a website or app is down for everyone or just you.]'''
:
==PPM Governance ==
===Who is on the Board of Directors?===
{| class="wikitable"
|+
|'''Picture'''
|'''Member'''
|'''Title'''
|'''Date'''
|-
|[[File:Josh Harlow.png|alt=photo of Josh Harlow|center|frameless|125x125px]]
|'''Joshua Harlow'''
|'''BOD President'''
|Elected 
June 27, 2023
|-
|[[File:Chris Stevens.jpg|alt=photo of Chris Stevens|frameless|center|125x125px]]
|'''Christopher Stevens  '''
|'''BOD Secretary'''
|Elected 
June 27, 2023
|-
|[[File:Art Hunt.jpg|alt=photo of Art Hunt|center|frameless|125x125px]]
|''' Art Hunt '''
|'''BOD Treasurer'''
|Elected
November 2022
|}

{| class="wikitable"
|-
|[[File:Quinn.jpg|alt=photo of Quinn Hackenberg|center|frameless|130x130px]]
|'''Quinn Hackenberg'''
|Elected
November 1, 2022
|-
|[[File:Marvin Harrell.png|alt=photo of Marvin Harrell|center|frameless|125x125px]]
|'''Marvin Harrell'''
|Elected
November 1, 2022
|-
|[[File:Steve Leininger.jpg|alt=photo of Steve Leininger|center|frameless|125x125px]]
|'''Steve Leininger'''
|Elected
November 1, 2022
|-
|
|
|
|-
|[[File:Joey B.jpg|alt=photo of Joey B|center|frameless|125x125px]]
|'''Joey Buchschacher'''
|Elected 
November 17, 2023
|-
|[[File:Drew Johnson.jpg|alt=photo of Drew Johnson|center|frameless|125x125px]]
|'''Drew Johnson'''
|Elected 
November 17, 2023
|-
|[[File:Gabriela.jpg|alt=photo of Gabriela Lisboa|center|frameless|125x125px]]
|'''Gabriela Lisboa'''
|Elected 
November 17, 2023
|-
|
|
|
|}
:'''Our Board of Directors can be contacted,'''
:'''both individually and as a group, via Slack.'''

===Board Meeting Minutes===
:'''[https://drive.google.com/drive/folders/1zofkbkbgLzXmfedy80ZBDvod4o2xTQYY Meeting Minutes 2018 through 2024]''' — on Google Drive

===Financial Reports===
:'''[https://drive.google.com/drive/folders/1hMDSUEm71255fYoeuwADaZk1b2EQb6Rk Financial documents]''' — on Google Drive

===Bylaws===
:'''[https://docs.google.com/document/d/1G_iLQnMsBdYkGXEJWU2baAeDZ3BKTq9Sabk4jQn8sWI/view Bylaws of PIKES PEAK MAKERSPACE]''' — on Google Drive 

==Previous PPM Executive Directors==
{| class="wikitable"
|+
|'''Member'''
|'''Title'''
|-
|Mathew Palfenier
|Executive Director of Business Administration

November 2023 to October 2024

Interim Director of Shop Operations

May 2023 to Oct 2023
|-
| Lisa MacNicol 
|Deputy Director (August 2022 - June 2023),
Executive Director (June 2023 - November 2023)
|-
| Drew Johnson 
|Executive Director
(July 2020 - May 2023)
|-
| Heather Bresnahan 
|Executive Director
|-
| John Norton 
|Executive Director
|-
| Anthony Abraham 
|Executive Director
|-
| Landon Descamps 
|Executive Director
|-
|
|
|}

== PPM Founder ==
{| class="wikitable"
|+
|[[File:Chris Vestal at the MAC.jpg|alt=photo of Chris Vestal at the MAC|center|frameless|145x145px]]
| Chris Vestal 
|Executive Director, PPM Founder
|}

==Related Pages==
'''Links to related PPM Wiki pages:'''
:[[Infrastructure at PPM|  '''Infrastructure at PPM'''  ]]
:[[Classroom_and_Meeting_Area|  '''Classroom / Meeting Area'''  ]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''

:'''[[QR Codes]]'''
:'''[[Colorado Springs]]'''

==For Additional Help==
{{Template:Footer}}
{{Template:Ideas into reality}}
   
[[Category:Volunteers Needed]]

About PPM

2024-11-06T14:40:25Z

Drew: /* PPM Board of Directors */

'''Things to know about PPM - Pikes Peak Makerspace:'''
:☐ We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region.

:☐ We provide a facility with space and equipment for people to create physical items for fun and for education.

:☐ PPM is also a place to gather interested people for all manner of classes and instruction.

:☐ We are tapped into and support the Colorado Springs startup community.

:☐ We are physically located in Colorado Springs, Colorado, USA.

:☐ We are a 501(c)(3) non-profit organization, EIN (Tax ID Number): 81-0876257
 
{{Template:Contact Us}}

   
 
[[File:Burst.png|alt=Welcome banner|link=https://wiki.pikespeakmakerspace.org/index.php/About_PPM|right|frameless|250x250px]]

==Maker Definition==
:'''A maker is someone who defines themselves by their ability to turn ideas into reality through creativity, innovation, and hands-on skills.'''

:Makers are typically driven by a desire to create and solve problems, using tools, materials, and technology to bring their visions to life. They often have a passion for a particular field or hobby, such as woodworking, electronics, or crafting, and may be self-taught or have formal training in their area of expertise. Makers take pride in their ability to think outside the box and find unique solutions to challenges, often experimenting with new techniques and materials to achieve their goals. They collaborate with other makers, sharing ideas and knowledge to create something greater than what they could achieve alone. Overall, being a maker is more than just a hobby or profession - it is a mindset and a way of life that values creativity, ingenuity, and hands-on problem-solving.

==PPM Mission Statement==
:Pikes Peak Makerspace (PPM) is a community of cooperative hobbyists and early-stage entrepreneurs that empowers members to turn ideas into reality. We strive to provide access to tools and resources to confidently and safely design, develop and make.

==PPM Vision Statement==
: We exist to catalyze positive change, drive economic growth and social progress by empowering individuals to unleash their full potential.
: We imagine a future where Pikes Peak Makerspace is the go-to destination for '''*makers*''' in the Pikes Peak Region seeking access to resources and knowledge, enabling them to turn their concepts into reality.
:Through our commitment to fostering a supportive, inclusive, and collaborative community, we will continue to expand our assets and capabilities to meet the evolving needs of the members.

==Official PPM Logo==
[[File:1_to_1_logo.png|alt=official PPM logo|frameless|200x200px]]

==PPM Logo Usage==
Gears are a common element of many other Makerspace logos, and for us it is also a subtle hat tip to the Pikes Peak Cog Railway.

'''''Follow these simple guidelines, and always use our logo consistently:'''''

'''Animation'''
* Do not animate as a gear or wheel
* Bouncing animation as computer screen saver probably OK

'''Background'''
* Our logo should appear on a plain background
* Can appear on a colored background (such as a color from a PPM Tool Area)
* Need clear space around our logo to avoid confusion
* May use logo within QR Code

'''Color'''
* Reproduce in black or "rich black"
* Can be white (reversed)

'''Design'''
* Do not alter our logo (number of "teeth", wording, font, or any design element).
* Maintain proportion (do not scale or skew)
* Do not attach the logo to other artwork or other wording

'''Maintenance:'''
* Replace damaged logos (especially signage)

'''Reproduction at PPM:'''
* Our logo can be reproduced at PPM to demonstrate our equipment/capabilities; for example:
3D Printers, CNC Router Table, Vinyl Cutter, Large Format Printer, Sublimation Printer, and other equipment.

'''''Our organization's name can be shortened to PPM, but not PPMS. (We use "Makerspace" as one word — not two.)'''''

== AI Generated Content==
AI generated content on this Pikes Peak Makerspace (PPM) Wiki will be labeled as such, to the extent possible.

Additionally, we are anticipating that AI “chat” interfaces for searching will become increasingly common,
so we will be continually improving content here to stay current and remain useful to both members and non-members.

Our social media sites and communication materials may have individual procedures and goals at this time.

==PPM Contact Information==
{| class="wikitable"
|'''Item'''
|'''Link'''
|'''Date'''
|-
|'''This Wiki'''
|https://wiki.pikespeakmakerspace.org
|'''November 2021'''
|-
|'''website'''
|https://pikespeakmakerspace.org
|
|-
|'''contact form'''
|https://pikespeakmakerspace.org/Contact
|
|-
|'''donation form'''
|https://pikespeakmakerspace.org/support-us
|
|-
|
|
|
|-
|'''phone'''
|719-445-MAKE (6253)
''Please leave a detailed message,''

''which will be translated to email.''
|
|-
|
|
|
|}
{| class="wikitable"
|'''Item'''
|'''Address'''
|'''Date'''
|-
|'''physical location'''
|
735 East Pikes Peak Avenue Colorado Springs, CO 80903
|'''2016'''
|-
|
|
|
|}
===[[New Member Orientation#Managing your Membership|Managing your Membership]]===
===[[How To Slack]]===

==PPM Social Media Links==
{| class="wikitable"
|+
|'''Service'''
|'''Link'''
|'''Date Joined'''
|-
|'''Linktree'''
|'''https://linktr.ee/pikespeakmakerspace'''
|'''March 2023'''
|-
|
|
|
|-
|'''Etsy'''
|'''https://www.etsy.com/ie/shop/PikesPeakMakerspace'''
|'''2022'''
|-
|'''Linkedin'''
|'''https://www.linkedin.com/company/pikes-peak-makerspace'''
|
|-
|
|
|
|}

==Other Links==
{| class="wikitable"
|'''Logo'''
|'''Link /''' '''Description'''
|'''Date Joined'''
|-
|[[File:King Soopers logo.png|alt=King Soopers logo|frameless|100x100px]]
|'''https://www.kingsoopers.com/account/communityrewards'''
[https://wiki.pikespeakmakerspace.org/index.php/File:King_Soopers_Community_Rewards.pdf '''King Soopers Community Rewards.pdf''']

"King Soopers makes donating easy by simply grocery shopping."

''Both Members and non-members can support PPM (easily)!''

[https://www.kingsoopers.com/stores/grocery/co/colorado-springs '''Kingsoopers has 11 grocery stores in Colorado Springs''']
|'''02/19/23'''
|-
|[[File:Amazon.png|alt=Amazon logo|frameless|100x100px]]
|'''[https://www.amazon.com/hz/wishlist/ls/2GLGQDTSNNZM4/ref=hz_ls_biz_ex Our Amazon Wishlist]'''
''Support PPM with a purchase from Amazon.''

|'''08/22/22'''
|-
|
|
|
|-
|[[File:Logo ebay.png|alt=ebay logo|frameless|90x90px]]
|'''https://www.ebay.com/usr/pikespeakmakerspace'''
''"ecommerce experiences for buyers, sellers and developers"''
|'''09/22/16'''
|-
|
|
|
|}

:'''[https://downforeveryoneorjustme.com/ Check if a website or app is down for everyone or just you.]'''
:
==PPM Governance ==
===Board of Directors===
{| class="wikitable"
|+
|'''Picture'''
|'''Member'''
|'''Title'''
|'''Date'''
|-
|[[File:Josh Harlow.png|alt=photo of Josh Harlow|center|frameless|125x125px]]
|'''Joshua Harlow'''
|'''BOD President'''
|Elected 
June 27, 2023
|-
|[[File:Chris Stevens.jpg|alt=photo of Chris Stevens|frameless|center|125x125px]]
|'''Christopher Stevens  '''
|'''BOD Secretary'''
|Elected 
June 27, 2023
|-
|[[File:Art Hunt.jpg|alt=photo of Art Hunt|center|frameless|125x125px]]
|''' Art Hunt '''
|'''BOD Treasurer'''
|Elected
November 2022
|}

{| class="wikitable"
|-
|[[File:Quinn.jpg|alt=photo of Quinn Hackenberg|center|frameless|130x130px]]
|'''Quinn Hackenberg'''
|Elected
November 1, 2022
|-
|[[File:Marvin Harrell.png|alt=photo of Marvin Harrell|center|frameless|125x125px]]
|'''Marvin Harrell'''
|Elected
November 1, 2022
|-
|[[File:Steve Leininger.jpg|alt=photo of Steve Leininger|center|frameless|125x125px]]
|'''Steve Leininger'''
|Elected
November 1, 2022
|-
|
|
|
|-
|[[File:Joey B.jpg|alt=photo of Joey B|center|frameless|125x125px]]
|'''Joey Buchschacher'''
|Elected 
November 17, 2023
|-
|[[File:Drew Johnson.jpg|alt=photo of Drew Johnson|center|frameless|125x125px]]
|'''Drew Johnson'''
|Elected 
November 17, 2023
|-
|[[File:Gabriela.jpg|alt=photo of Gabriela Lisboa|center|frameless|125x125px]]
|'''Gabriela Lisboa'''
|Elected 
November 17, 2023
|-
|
|
|
|}
:'''Our Board of Directors can be contacted,'''
:'''both individually and as a group, via Slack.'''

===Board Meeting Minutes===
:'''[https://drive.google.com/drive/folders/1zofkbkbgLzXmfedy80ZBDvod4o2xTQYY Meeting Minutes 2018 through 2024]''' — on Google Drive

===Financial Reports===
:'''[https://drive.google.com/drive/folders/1hMDSUEm71255fYoeuwADaZk1b2EQb6Rk Financial documents]''' — on Google Drive

===Bylaws===
:'''[https://docs.google.com/document/d/1G_iLQnMsBdYkGXEJWU2baAeDZ3BKTq9Sabk4jQn8sWI/view Bylaws of PIKES PEAK MAKERSPACE]''' — on Google Drive 

==Previous PPM Executive Directors==
{| class="wikitable"
|+
|'''Member'''
|'''Title'''
|-
|Mathew Palfenier
|Executive Director of Business Administration

November 2023 to October 2024

Interim Director of Shop Operations

May 2023 to Oct 2023
|-
| Lisa MacNicol 
|Deputy Director (August 2022 - June 2023),
Executive Director (June 2023 - November 2023)
|-
| Drew Johnson 
|Executive Director
(July 2020 - May 2023)
|-
| Heather Bresnahan 
|Executive Director
|-
| John Norton 
|Executive Director
|-
| Anthony Abraham 
|Executive Director
|-
| Landon Descamps 
|Executive Director
|-
|
|
|}

== PPM Founder ==
{| class="wikitable"
|+
|[[File:Chris Vestal at the MAC.jpg|alt=photo of Chris Vestal at the MAC|center|frameless|145x145px]]
| Chris Vestal 
|Executive Director, PPM Founder
|}

==Related Pages==
'''Links to related PPM Wiki pages:'''
:[[Infrastructure at PPM|  '''Infrastructure at PPM'''  ]]
:[[Classroom_and_Meeting_Area|  '''Classroom / Meeting Area'''  ]] - '''[https://pikespeakmakerspace.org/reserve make a reservation]'''

:'''[[QR Codes]]'''
:'''[[Colorado Springs]]'''

==For Additional Help==
{{Template:Footer}}
{{Template:Ideas into reality}}
   
[[Category:Volunteers Needed]]

Metal Shop — CNC SHOPMASTER

2024-05-24T17:24:45Z

Drew: /* Metal Shop Equipment */

[[File:Level 3 badge.png|alt=Level 3 badge used at Pikes Peak Makerspace|left|frameless|100x100px|PPM TRAINING & CERTIFICATION REQUIRED]]

'''The Metal Shop Area at Pikes Peak Makerspace (PPM) consists mostly of Level 3 equipment.'''

Additional PPM training and then certification is required to use any of our Level 3 equipment.

'''Metal Shop Area''' hand tools should be marked with '''pink''' tape, paint, or powder coating. 
 
 
{{Template:Contact Us}}

 
 
{{Template:Safety}}
 
 
==Classes and Training==

===[[New Member Orientation]]===

===Area Leader — Josh Harlow===
:To help out in the Metal Shop Area contact the Area Leader on Slack.

===Classes===
: PPM announces its [https://www.meetup.com/pikespeakmakerspace/events '''Upcoming events, including classes, on Meetup''']

===Training===
Links to external sites:
:'''[https://www.machsupport.com/software/mach3/ Mach3]''' — control motors (stepper & servo) by processing G-Code
:'''[[wikipedia:G-code|G-code]]''' — on Wikipedia

==Equipment Lists==
===Metal Shop Equipment===
{| class="wikitable"
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important;; background-color:#EB4F9C; color:#ffffff;"
| style="vertical-align:middle;" |Picture
|Item
|Manufacturer
|Model Number
|Resources
|Owner
|-
|
|'''shopmaster eldorado'''
'''bridge mill''' 
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|55x55px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|shopmaster
|
|Approx work area of 12"X by 9"Y
|'''PPM'''
|- style="font-weight:bold; text-align:left; font-family:Arial, Helvetica, sans-serif !important; color:#000000;"
| style="vertical-align:middle;" |
|
|
|
|
|
|}
:'''Metal Shop Area''' hand tools should be marked with '''pink''' tape or paint or powder coating.
:Return all tools to their proper location after use. This rule applies to all areas of our Makerspace.
[[Donations Received|'''Donations Received''']]
:'''December 2023, [https://barnowlag.com/ Barn Owl Precision Agriculture],''' 20 ton hydraulic press
[[Wish List#Metal%20Shop|'''Wish List''']]
:Pikes Peak Makerspace is a 501(c)(3) non-profit organization, so we can provide a receipt for any donations you make.
==Benefits ==
{{Member Benefits}}
==Policies==
'''Materials'''
:'''Donate for "General Supplies" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''''Or, leave donations in a black payment box, or use a QR code.'''''
{{Red Tags}}

==Member Showcase==
<gallery widths="200" heights="125" >
File:Handlebar brace.jpg|alt=Machined bicycle part|'''Machined bicycle part by Jason Macom (January 2024)'''
</gallery>

{{Template:Showcase_blurb}}

==Related Pages ==
Links to related PPM Wiki pages:
:[[Metal_Shop|  '''Metal Shop'''  ]]
:[[Sandblasting Cabinet|  '''Metal Shop — Sandblasting Cabinet'''  ]]
:[[Powder_Coating_Area|  '''Metal Shop — Powder Coating'''  ]]
:[[Welding_Area|  '''Metal Shop — Welding Area'''  ]]
:[[Wood_Shop|  '''Wood Shop'''  ]]
:[[Vented Room|  '''Vented Room'''  ]]
:[[Shed|  '''Shed'''  ]]

:'''[[Autodesk Fusion Tips]]'''

==Hand-Curated Links==
Links to member-recommended external sites:
:'''[https://littlemachineshop.com/info/business_resources.php?ID=1343147249&CAT=1 Little Machine Shop]''' — Resource Information
:'''[https://8020.net/ 80/20]''' — BUILD YOUR IDEA
:'''[https://www.unistrut.us/resources UNISTRUT]''' — Metal Framing System

==For Additional Help==
:Use the PPM Slack channel #metal-shop
:[[How To Slack#PPM Channel Names and Descriptions|'''List of all PPM Slack channels''']]
:Note that we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
{{Template:Footer}}
{{Template:Ideas into reality}}

About PPM

2023-05-29T15:34:43Z

Drew: /* Previous PPM Leaders */

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.
 
 
[[File:Burst.png|alt=Welcome banner|right|frameless|Burst welcome page|250x250px]]

==About Pikes Peak Makerspace==
'''Official Logo:'''

[[File:1_to_1_logo.png|alt=|frameless|200x200px]]

• We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region. We provide a facility with space and equipment for people to create physical items for fun and for education. PPM also is a place to gather interested people for all manner of classes and instruction.

• We are tapped into and support the Colorado Springs startup community.

• Pikes Peak Makerspace is a 501(c)(3) non-profit organization.
 
 
The famous inventor Nikola Tesla has some local history in Colorado Springs.

In the 1890s, Tesla conducted high-voltage, high-frequency power experiments here. A small plaque on Pikes Peak Avenue just west of downtown Colorado Springs (and only a minute or so by car from our Makerspace) recognizes his accomplishments. These days you might catch a member's Tesla car, other electric car or electric bicycle in our parking lot.

== Mission Statement==
Pikes Peak Makerspace is a community of cooperative hobbyists and early-stage entrepreneurs that empowers members to turn ideas into reality. We strive to provide access to tools and resources to confidently and safely design, develop and make.

Our goal is simple: Walk in with an idea, walk out with it in your hand.

==Vision Statement==
We exist to catalyze positive change, drive economic growth and social progress by empowering individuals to unleash their full potential.

We imagine a future where Pikes Peak Makerspace is the go-to destination for makers* in the Pikes Peak Region seeking access to resources and knowledge, enabling them to turn their concepts into reality.

Through our commitment to fostering a supportive, inclusive, and collaborative community, we will continue to expand our assets and capabilities to meet the evolving needs of the members.

==Maker Definition==
<nowiki>*</nowiki>A maker is someone who defines themselves by their ability to turn ideas into reality through creativity, innovation, and hands-on skills. Makers are typically driven by a desire to create and solve problems, using tools, materials, and technology to bring their visions to life. They often have a passion for a particular field or hobby, such as woodworking, electronics, or crafting, and may be self-taught or have formal training in their area of expertise. Makers take pride in their ability to think outside the box and find unique solutions to challenges, often experimenting with new techniques and materials to achieve their goals. They may collaborate with other makers, sharing ideas and knowledge to create something greater than what they could achieve alone. Overall, being a maker is more than just a hobby or profession - it is a mindset and a way of life that values creativity, ingenuity, and hands-on problem-solving. 

== Contact Info==
{| class="wikitable sortable"
!
!Link
!  Date  
|-
|<center>'''[https://wiki.pikespeakmakerspace.org (This) Wiki]'''</center>
|https://wiki.pikespeakmakerspace.org
|November 2021
|-
|<center>'''[https://pikespeakmakerspace.org website]'''</center>
|https://pikespeakmakerspace.org
|
|-
|<center>'''phone'''</center>
|719-445-MAKE(6253)
|
|-
|<center>'''location'''</center>
|
735 East Pikes Peak Avenue

Colorado Springs, CO 80903
|
|-
|<center>'''email'''</center>
|https://pikespeakmakerspace.org/Contact
|
|}

==Social Media Links ==
{| class="wikitable sortable"
!
!Service
!Link
!Date Joined
|-
|[[File:Linktree logo.png|alt=Linktree logo|center|frameless|50x50px]]
|<center>'''Linktree'''</center>
|https://linktr.ee/pikespeakmakerspace
|<center>March 2023</center>
|-
|[[File:2021 Facebook icon.png|center|frameless|alt=Facebook icon|50x50px]]
|<center>'''Facebook'''</center>
|https://www.facebook.com/ppmakerspace
|<center>[https://www.facebook.com/ppmakerspace/photos/ms.c.eJxFkNuNRTEIAzta8Yb039jqYF3zOxpsJ~_rPNcayS9Tf~;OkHUkTleWQWgX2GmRI4jCCIsOqZO~_k90QMDkD~_gaAka6jCEIGEYQW1Ls9ZkT8QJbE~_cLRYAZzQAW2w2tNjiGGYc5gg1hjoyTA58O~;Se729Dkz8WBuNALOhHUBuqNFJgcHoqAJdmb8s9rvfHYmh0Aeg~;vQJieg~-~-.bps.a.1393148254268065/1393148257601398/ September 2014]</center>
|-
|[[File:Instagram logo 2016.png|alt=Instagram logo|center|frameless|50x50px]]
|<center>'''Instagram '''</center>
|https://www.instagram.com/pikespeakmakerspace/
|<center>[https://www.instagram.com/p/Bam0RIxBQu-/ October 23rd, 2017]</center>
|-
|[[File:Twitter-logo.png|alt=Twitter logo|center|frameless|50x50px]]
|<center>'''Twitter'''</center>
|https://twitter.com/PikesPeakMakers
|<center>April 4, 2015</center>
|-
| [[File:YouTube Logo 2017.png|center|frameless|alt=YouTube logo|75x75px]] 
|<center>'''YouTube'''</center>
|https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg
|<center>Sep 4, 2014
</center>
|-
|
|<center>'''Service'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

== PPM Admin Links ==
'''Services we use at Pikes Peak Makerspace:'''
{| class="wikitable sortable"
|+
!Service
!Description
!Link
!  Date Joined
|-
| <center>'''ANVEO'''</center> 
|VOIP phone service
|https://www.anveo.com/
|
|-
| <center>'''Catchafire'''</center> 
|Volunteers, nonprofits, and funders working together to solve urgent problems and lift up communities.
|https://www.catchafire.org/
|
|-
| <center>'''Cheddar Up'''</center> 
|An app for reimbursement for consumables.
|https://www.cheddarup.com/
|August 2022
|-
|<center> '''  Google Calendar  ''' </center>
|Time-management and scheduling calendar service.
|
|
|-
|<center> '''  Google Forms  ''' </center>
|An app that allows users to create and edit surveys online while collaborating with other users in real-time.
|
|
|-
|<center> '''  Google Maps  ''' </center>
|Provides route planning, street images and aerial photography
|'''[https://www.google.com/maps/d/u/0/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
|February 24, 2022
|-
|<center> '''  Google Maps  ''' </center>
|Provides route planning, street images and aerial photography
|'''[https://www.google.com/maps/d/viewer?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&ll=38.879565668710356%2C-104.7948964&z=11 Map of helpful local resources curated by our makers]'''
|June 20, 2022
|-
|<center> '''Join It''' </center>
|Used to manage our memberships
|'''https://www.joinit.org/o/pikes-peak-makerspace'''
|
|-
|<center> '''Jotform''' </center>
|Online form builder, online survey tool
|'''https://pikespeakmakerspace.org/reserve'''
|
|-
|<center>''' MailChimp '''</center>
|Create email marketing campaigns to send to customers
|https://mailchimp.com/
|
|-
|<center>''' Meetup '''</center>
|Used to schedule classes and collect payments for tickets (via PayPal)
|'''https://www.meetup.com/pikespeakmakerspace/'''
|
|-
|<center> '''PayPal''' </center>
|Donations and reimbursement for consumables, payment for classes on Meetup
|[https://www.paypal.com/donate/?cmd=_s-xclick&hosted_button_id=T4LACP7P6BJ58&source=url '''https://www.paypal.com/donate/?cmd=_s-xclick&hosted_button_id=T4LACP7P6BJ58''']
|
|-
|<center>''' Slack '''</center>
|The official communication channel of PPM
|'''https://app.slack.com/client/T9WJLU7TK/C01CST3E0LA'''
|
|-
|<center>''' Stripe '''</center>
|Collects the recurring payments set up in Join It
|https://stripe.com/
|
|-
|<center>'''TechSoup'''</center>
|Provides eligible organizations with donated and discounted software, hardware, services, and training
|https://www.techsoup.org/
|
|-
|<center>'''Trello'''</center>
|Provides team collaboration,

project management,

task management
|'''https://trello.com/b/ZUoaoJYJ/ppm-projects'''
|
|-
|<center> '''WaiverForever''' </center>
|For small business owners to electronically handle waiver forms
|https://www.waiverforever.com/
|
|-
|<center> '''WildApricot''' </center>
|Cloud software to automate and simplify membership tasks and host the PPM website
|https://www.wildapricot.com/
|
|-
|<center>'''Service'''</center>
|<center>'''Description'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

==='''[[How To Slack]]'''===

==='''[[New Member Orientation#Managing your Membership|Managing your Membership]] '''===
 

==Other Links==
{| class="wikitable sortable"
!
!Service
!Link
!Date Joined
|-
|[[File:King Soopers logo.png|alt=King Soopers logo|center|frameless|100x100px]]
|<center>'''      King Soopers'''
'''Community Rewards '''
</center>
|"King Soopers makes donating easy by simply grocery shopping."
[https://wiki.pikespeakmakerspace.org/index.php/File:King_Soopers_Community_Rewards.pdf '''King Soopers Community Rewards.pdf''']
|<center>02/19/23</center>
|-
|[[File:Amazon.png|alt=Amazon logo|frameless|100x100px]]
|<center>'''   Amazon PPM Wishlist   '''</center>
|Support PPM by making a purchase from our wishlist
'''https://www.amazon.com/hz/wishlist/ls/2GLGQDTSNNZM4/ref=hz_ls_biz_ex'''
|<center>08/22/22</center>
|-
| [[File:Logo ebay.png|center|frameless|50x50px]] 
|<center>'''eBay'''</center>
|'''https://www.ebay.com/usr/pikespeakmakerspace'''
|<center>09/22/16</center>
|-
| [[File:Logo Etsy.png|alt=Etsy logo|center|frameless|50x50px]] 
|<center>'''Etsy'''</center>
|'''https://www.etsy.com/shop/PikesPeakMakerspace'''
|<center>2020</center>
|-
| [[File:Logo LibraryThing.png|alt=LibraryThing logo|center|frameless|85x85px]] 
|<center>'''LibraryThing'''</center>
|'''https://www.librarything.com/catalog/PikesPeakMakerspace'''
|<center>January 2022</center>
|-
|
|<center>'''Service'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

==PPM Area Captains==
'''Our Area Captains can be contacted via Slack:'''
{| class="wikitable sortable"
|+
!'''Area'''
!Area Captain
!Slack Channel
|-
|'''[[3D Printing]]'''
|'''Trevor Banks'''
''Volunteers needed  ''
|#3d-printing
|-
|'''[[3D Scanning]]'''
|'''Trevor Banks'''
''Volunteers needed  ''
|#3d-printing
|-
|'''[[Arduino]]'''
|''Volunteers needed  ''
|#computing

<nowiki>#</nowiki>electronics
|-
|'''[[CNC]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#cnc-machine
|-
|'''[[Computers]]'''
|''Volunteers needed''
|#computing
|-
|'''[[Electronics]]'''
|'''Steve Leininger'''
|#electronics
|-
|'''[[Laser#Area Captains|Laser (Epilog Zing)]]'''
|'''Jonathan Wommack'''
|#laser-cutter
|-
|[[Laser#Area Captains|'''Laser (BOSSLASER)''']]
|'''Mathew Palfenier'''
|#laser-cutter
|-
|'''[[Metal Shop]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Powder Coating Area|Powder Coating]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Large Format Printing|Printing Area]]'''
|'''Mathew Palfenier'''
|#printer-suite
|-
|'''[[Raspberry Pi]]'''
|''Volunteers needed''
|#computing

<nowiki>#</nowiki>electronics
|-
|'''[[Vinyl Cutting|Vinyl Cutter]]'''
|''Volunteers needed''
|#vinyl-cutter
|-
|'''[[Welding Area]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Wood Shop]]'''
|'''John Hoover'''
|#wood-shop
|-
!'''Area'''
!'''Area Captain'''
!'''Slack Channel'''
|}

==PPM Directors and Coordinators==
{| class="wikitable sortable"
|+
!Picture
!Member
!'''Title'''
!  Date  
|-
|
|
|
|
|-
|[[File:Lisa MacNicol.jpg|alt=Lisa MacNicol headshot|center|frameless|125x125px]]
|''' Lisa MacNicol '''
|Executive Director of Business Administration

|August 2022
to

present
|-
|
|Mathew Palfenier
|Executive Director of Operations
|May 2023
to

present
|}
'''Our Directors and Coordinators can be contacted via Slack.''' 

==PPM Bylaws and Board Minutes==
:'''[https://drive.google.com/file/d/1KdjW-DPivIe-ORPvdyL4gARHdIzujn9A/view Bylaws of PIKES PEAK MAKERSPACE]'''
:'''[https://drive.google.com/drive/folders/1zofkbkbgLzXmfedy80ZBDvod4o2xTQYY Meeting Minutes 2018 through 2023]''' 

==PPM Board of Directors ==
{| class="wikitable sortable"
|+
{| class="wikitable sortable"
!'''Picture'''
!'''Member'''
!'''Title'''
!Date
|-
|[[File:Jason Taylor.jpg|alt=Jason Taylor headshot|center|frameless|125x125px]]
|''' Jason Taylor '''
|BOD President
|Elected,
November 2021
|-
|[[File:Josh Harlow.png|alt=Josh Harlow headshot|center|frameless|125x125px]]
|'''Joshua Harlow'''
|BOD Secretary
|Newly elected,
November 1, 2022
|-
|[[File:Art Hunt.jpg|alt=Art Hunt headshot|center|frameless|125x125px]]
|''' Art Hunt '''
|BOD Treasurer
|Elected,
November 2022
|}

|-
|[[File:Eman.jpg|alt=Eman Spencer headshot|center|frameless|130x130px]]
|'''Emmanuel (Eman) Spencer'''
|Newly elected,
November 1, 2022
|-
|[[File:Quinn.jpg|alt=Quinn Hackenberg headshot|center|frameless|130x130px]]
|'''Quinn Hackenberg'''
|Newly elected,
November 1, 2022
|-
|[[File:Marvin Harrell.png|alt=Marvin Harrell headshot|center|frameless|125x125px]]
|'''Marvin Harrell'''
|Newly elected,
November 1, 2022
|-
|[[File:Steve Leininger.jpg|alt=Steve Leininger headshot|center|frameless|125x125px]]
|'''Steve Leininger'''
|Newly elected,
November 1, 2022
|-
|[[File:Theresa Rigney.jpg|alt=Theresa Rigney headshot|center|frameless|125x125px]]
|'''Theresa Rigney'''
|Newly elected,
November 1, 2022
|-
|
[[File:Chris Stevens.jpg|alt=Chris Stevens headshot|frameless|center|125x125px]]
|'''Christopher Stevens'''
|Newly elected,
November 1, 2022
|}
'''Our Board of Directors can be contacted via Slack.'''

==Previous PPM Leaders==
{| class="wikitable sortable"
|+
!Picture
!Member
!Contact
!'''Title'''
|-
|[[File:Chris Vestal at the MAC.jpg|alt=Chris Vestal at the MAC|center|frameless|145x145px]]
|''' Chris Vestal   '''
|'''[https://www.instagram.com/motominded/ MotoMinded LLC]'''
(Instagram)
|PPM Founder  
|-
|Landon Descamps
|
|
|Executive Director
|-
|Anthony Abraham
|
|
|Executive Director
|-
|John Norton
|
|
|Executive Director
|-
|Heather Bresnahan
|
|
|Executive Director
|-
|[[File:Drew Johnson.jpg|center|frameless|125x125px]]
|''' Drew Johnson '''
|[https://techwears.com TechWears Ltd]
|Executive Director
July 2020 - May 2023
|}
 
[[File:Pikes Peak with snow.jpg|alt=Pikes Peak|left|thumb|400x400px|<center>Pikes Peak, America's Mountain, taken from our parking lot.
 
(February 18, 2022 10:20 AM)|link=https://wiki.pikespeakmakerspace.org/index.php/File:Pikes_Peak_with_snow.jpg]]
 
 
 
 

 
 
 

 

[[wikivoyage:Colorado_Springs|Wikivoyage]]  |  [https://www.visitcos.com/travel-tools/webcam/ Colorado Springs Webcams]  |  [https://weather.com/weather/today/l/c5baf779c6d5406f64806f25c9622372356cabc4d6418936e9785b3b58d4a2b0 Weather]  |  [https://www.google.com/maps/place/735+E+Pikes+Peak+Ave,+Colorado+Springs,+CO+80903/@38.8330369,-104.8137709,17z/data=!3m1!4b1!4m5!3m4!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!8m2!3d38.8330369!4d-104.8115822?hl=en Google Map]

 
<hr>
{{Template:Footer}}

[[Category:Volunteers Needed]]

About PPM

2023-05-29T13:20:04Z

Drew: /* PPM Founder */

Pikes Peak Makerspace (PPM) is dedicated to supporting our maker community in their creative process by providing shared space, shared tools, software, materials and a knowledge base to turn their ideas into reality.
 
 
[[File:Burst.png|alt=Welcome banner|right|frameless|Burst welcome page|250x250px]]

==About Pikes Peak Makerspace==
'''Official Logo:'''

[[File:1_to_1_logo.png|alt=|frameless|200x200px]]

• We are a membership composed of Builders, Tinkerers, Engineers, Artists, Entrepreneurs, Designers, and Educators all mashed up and revolutionizing creativity in the Pikes Peak Region. We provide a facility with space and equipment for people to create physical items for fun and for education. PPM also is a place to gather interested people for all manner of classes and instruction.

• We are tapped into and support the Colorado Springs startup community.

• Pikes Peak Makerspace is a 501(c)(3) non-profit organization.
 
 
The famous inventor Nikola Tesla has some local history in Colorado Springs.

In the 1890s, Tesla conducted high-voltage, high-frequency power experiments here. A small plaque on Pikes Peak Avenue just west of downtown Colorado Springs (and only a minute or so by car from our Makerspace) recognizes his accomplishments. These days you might catch a member's Tesla car, other electric car or electric bicycle in our parking lot.

== Mission Statement==
Pikes Peak Makerspace is a community of cooperative hobbyists and early-stage entrepreneurs that empowers members to turn ideas into reality. We strive to provide access to tools and resources to confidently and safely design, develop and make.

Our goal is simple: Walk in with an idea, walk out with it in your hand.

==Vision Statement==
We exist to catalyze positive change, drive economic growth and social progress by empowering individuals to unleash their full potential.

We imagine a future where Pikes Peak Makerspace is the go-to destination for makers* in the Pikes Peak Region seeking access to resources and knowledge, enabling them to turn their concepts into reality.

Through our commitment to fostering a supportive, inclusive, and collaborative community, we will continue to expand our assets and capabilities to meet the evolving needs of the members.

==Maker Definition==
<nowiki>*</nowiki>A maker is someone who defines themselves by their ability to turn ideas into reality through creativity, innovation, and hands-on skills. Makers are typically driven by a desire to create and solve problems, using tools, materials, and technology to bring their visions to life. They often have a passion for a particular field or hobby, such as woodworking, electronics, or crafting, and may be self-taught or have formal training in their area of expertise. Makers take pride in their ability to think outside the box and find unique solutions to challenges, often experimenting with new techniques and materials to achieve their goals. They may collaborate with other makers, sharing ideas and knowledge to create something greater than what they could achieve alone. Overall, being a maker is more than just a hobby or profession - it is a mindset and a way of life that values creativity, ingenuity, and hands-on problem-solving. 

== Contact Info==
{| class="wikitable sortable"
!
!Link
!  Date  
|-
|<center>'''[https://wiki.pikespeakmakerspace.org (This) Wiki]'''</center>
|https://wiki.pikespeakmakerspace.org
|November 2021
|-
|<center>'''[https://pikespeakmakerspace.org website]'''</center>
|https://pikespeakmakerspace.org
|
|-
|<center>'''phone'''</center>
|719-445-MAKE(6253)
|
|-
|<center>'''location'''</center>
|
735 East Pikes Peak Avenue

Colorado Springs, CO 80903
|
|-
|<center>'''email'''</center>
|https://pikespeakmakerspace.org/Contact
|
|}

==Social Media Links ==
{| class="wikitable sortable"
!
!Service
!Link
!Date Joined
|-
|[[File:Linktree logo.png|alt=Linktree logo|center|frameless|50x50px]]
|<center>'''Linktree'''</center>
|https://linktr.ee/pikespeakmakerspace
|<center>March 2023</center>
|-
|[[File:2021 Facebook icon.png|center|frameless|alt=Facebook icon|50x50px]]
|<center>'''Facebook'''</center>
|https://www.facebook.com/ppmakerspace
|<center>[https://www.facebook.com/ppmakerspace/photos/ms.c.eJxFkNuNRTEIAzta8Yb039jqYF3zOxpsJ~_rPNcayS9Tf~;OkHUkTleWQWgX2GmRI4jCCIsOqZO~_k90QMDkD~_gaAka6jCEIGEYQW1Ls9ZkT8QJbE~_cLRYAZzQAW2w2tNjiGGYc5gg1hjoyTA58O~;Se729Dkz8WBuNALOhHUBuqNFJgcHoqAJdmb8s9rvfHYmh0Aeg~;vQJieg~-~-.bps.a.1393148254268065/1393148257601398/ September 2014]</center>
|-
|[[File:Instagram logo 2016.png|alt=Instagram logo|center|frameless|50x50px]]
|<center>'''Instagram '''</center>
|https://www.instagram.com/pikespeakmakerspace/
|<center>[https://www.instagram.com/p/Bam0RIxBQu-/ October 23rd, 2017]</center>
|-
|[[File:Twitter-logo.png|alt=Twitter logo|center|frameless|50x50px]]
|<center>'''Twitter'''</center>
|https://twitter.com/PikesPeakMakers
|<center>April 4, 2015</center>
|-
| [[File:YouTube Logo 2017.png|center|frameless|alt=YouTube logo|75x75px]] 
|<center>'''YouTube'''</center>
|https://www.youtube.com/channel/UCeIsImKtiNm7D_BxfG4n7zg
|<center>Sep 4, 2014
</center>
|-
|
|<center>'''Service'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

== PPM Admin Links ==
'''Services we use at Pikes Peak Makerspace:'''
{| class="wikitable sortable"
|+
!Service
!Description
!Link
!  Date Joined
|-
| <center>'''ANVEO'''</center> 
|VOIP phone service
|https://www.anveo.com/
|
|-
| <center>'''Catchafire'''</center> 
|Volunteers, nonprofits, and funders working together to solve urgent problems and lift up communities.
|https://www.catchafire.org/
|
|-
| <center>'''Cheddar Up'''</center> 
|An app for reimbursement for consumables.
|https://www.cheddarup.com/
|August 2022
|-
|<center> '''  Google Calendar  ''' </center>
|Time-management and scheduling calendar service.
|
|
|-
|<center> '''  Google Forms  ''' </center>
|An app that allows users to create and edit surveys online while collaborating with other users in real-time.
|
|
|-
|<center> '''  Google Maps  ''' </center>
|Provides route planning, street images and aerial photography
|'''[https://www.google.com/maps/d/u/0/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
|February 24, 2022
|-
|<center> '''  Google Maps  ''' </center>
|Provides route planning, street images and aerial photography
|'''[https://www.google.com/maps/d/viewer?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&ll=38.879565668710356%2C-104.7948964&z=11 Map of helpful local resources curated by our makers]'''
|June 20, 2022
|-
|<center> '''Join It''' </center>
|Used to manage our memberships
|'''https://www.joinit.org/o/pikes-peak-makerspace'''
|
|-
|<center> '''Jotform''' </center>
|Online form builder, online survey tool
|'''https://pikespeakmakerspace.org/reserve'''
|
|-
|<center>''' MailChimp '''</center>
|Create email marketing campaigns to send to customers
|https://mailchimp.com/
|
|-
|<center>''' Meetup '''</center>
|Used to schedule classes and collect payments for tickets (via PayPal)
|'''https://www.meetup.com/pikespeakmakerspace/'''
|
|-
|<center> '''PayPal''' </center>
|Donations and reimbursement for consumables, payment for classes on Meetup
|[https://www.paypal.com/donate/?cmd=_s-xclick&hosted_button_id=T4LACP7P6BJ58&source=url '''https://www.paypal.com/donate/?cmd=_s-xclick&hosted_button_id=T4LACP7P6BJ58''']
|
|-
|<center>''' Slack '''</center>
|The official communication channel of PPM
|'''https://app.slack.com/client/T9WJLU7TK/C01CST3E0LA'''
|
|-
|<center>''' Stripe '''</center>
|Collects the recurring payments set up in Join It
|https://stripe.com/
|
|-
|<center>'''TechSoup'''</center>
|Provides eligible organizations with donated and discounted software, hardware, services, and training
|https://www.techsoup.org/
|
|-
|<center>'''Trello'''</center>
|Provides team collaboration,

project management,

task management
|'''https://trello.com/b/ZUoaoJYJ/ppm-projects'''
|
|-
|<center> '''WaiverForever''' </center>
|For small business owners to electronically handle waiver forms
|https://www.waiverforever.com/
|
|-
|<center> '''WildApricot''' </center>
|Cloud software to automate and simplify membership tasks and host the PPM website
|https://www.wildapricot.com/
|
|-
|<center>'''Service'''</center>
|<center>'''Description'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

==='''[[How To Slack]]'''===

==='''[[New Member Orientation#Managing your Membership|Managing your Membership]] '''===
 

==Other Links==
{| class="wikitable sortable"
!
!Service
!Link
!Date Joined
|-
|[[File:King Soopers logo.png|alt=King Soopers logo|center|frameless|100x100px]]
|<center>'''      King Soopers'''
'''Community Rewards '''
</center>
|"King Soopers makes donating easy by simply grocery shopping."
[https://wiki.pikespeakmakerspace.org/index.php/File:King_Soopers_Community_Rewards.pdf '''King Soopers Community Rewards.pdf''']
|<center>02/19/23</center>
|-
|[[File:Amazon.png|alt=Amazon logo|frameless|100x100px]]
|<center>'''   Amazon PPM Wishlist   '''</center>
|Support PPM by making a purchase from our wishlist
'''https://www.amazon.com/hz/wishlist/ls/2GLGQDTSNNZM4/ref=hz_ls_biz_ex'''
|<center>08/22/22</center>
|-
| [[File:Logo ebay.png|center|frameless|50x50px]] 
|<center>'''eBay'''</center>
|'''https://www.ebay.com/usr/pikespeakmakerspace'''
|<center>09/22/16</center>
|-
| [[File:Logo Etsy.png|alt=Etsy logo|center|frameless|50x50px]] 
|<center>'''Etsy'''</center>
|'''https://www.etsy.com/shop/PikesPeakMakerspace'''
|<center>2020</center>
|-
| [[File:Logo LibraryThing.png|alt=LibraryThing logo|center|frameless|85x85px]] 
|<center>'''LibraryThing'''</center>
|'''https://www.librarything.com/catalog/PikesPeakMakerspace'''
|<center>January 2022</center>
|-
|
|<center>'''Service'''</center>
|<center>'''Link'''</center>
|<center>'''Date Joined'''</center>
|}

==PPM Area Captains==
'''Our Area Captains can be contacted via Slack:'''
{| class="wikitable sortable"
|+
!'''Area'''
!Area Captain
!Slack Channel
|-
|'''[[3D Printing]]'''
|'''Trevor Banks'''
''Volunteers needed  ''
|#3d-printing
|-
|'''[[3D Scanning]]'''
|'''Trevor Banks'''
''Volunteers needed  ''
|#3d-printing
|-
|'''[[Arduino]]'''
|''Volunteers needed  ''
|#computing

<nowiki>#</nowiki>electronics
|-
|'''[[CNC]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#cnc-machine
|-
|'''[[Computers]]'''
|''Volunteers needed''
|#computing
|-
|'''[[Electronics]]'''
|'''Steve Leininger'''
|#electronics
|-
|'''[[Laser#Area Captains|Laser (Epilog Zing)]]'''
|'''Jonathan Wommack'''
|#laser-cutter
|-
|[[Laser#Area Captains|'''Laser (BOSSLASER)''']]
|'''Mathew Palfenier'''
|#laser-cutter
|-
|'''[[Metal Shop]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Powder Coating Area|Powder Coating]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Large Format Printing|Printing Area]]'''
|'''Mathew Palfenier'''
|#printer-suite
|-
|'''[[Raspberry Pi]]'''
|''Volunteers needed''
|#computing

<nowiki>#</nowiki>electronics
|-
|'''[[Vinyl Cutting|Vinyl Cutter]]'''
|''Volunteers needed''
|#vinyl-cutter
|-
|'''[[Welding Area]]'''
|'''Trevor Banks'''
''Volunteers needed''
|#metal-shop
|-
|'''[[Wood Shop]]'''
|'''John Hoover'''
|#wood-shop
|-
!'''Area'''
!'''Area Captain'''
!'''Slack Channel'''
|}

==PPM Directors and Coordinators==
{| class="wikitable sortable"
|+
!Picture
!Member
!'''Title'''
!  Date  
|-
|
|
|
|
|-
|[[File:Lisa MacNicol.jpg|alt=Lisa MacNicol headshot|center|frameless|125x125px]]
|''' Lisa MacNicol '''
|Executive Director of Business Administration

|August 2022
to

present
|-
|
|Mathew Palfenier
|Executive Director of Operations
|May 2023
to

present
|}
'''Our Directors and Coordinators can be contacted via Slack.''' 

==PPM Bylaws and Board Minutes==
:'''[https://drive.google.com/file/d/1KdjW-DPivIe-ORPvdyL4gARHdIzujn9A/view Bylaws of PIKES PEAK MAKERSPACE]'''
:'''[https://drive.google.com/drive/folders/1zofkbkbgLzXmfedy80ZBDvod4o2xTQYY Meeting Minutes 2018 through 2023]''' 

==PPM Board of Directors ==
{| class="wikitable sortable"
|+
{| class="wikitable sortable"
!'''Picture'''
!'''Member'''
!'''Title'''
!Date
|-
|[[File:Jason Taylor.jpg|alt=Jason Taylor headshot|center|frameless|125x125px]]
|''' Jason Taylor '''
|BOD President
|Elected,
November 2021
|-
|[[File:Josh Harlow.png|alt=Josh Harlow headshot|center|frameless|125x125px]]
|'''Joshua Harlow'''
|BOD Secretary
|Newly elected,
November 1, 2022
|-
|[[File:Art Hunt.jpg|alt=Art Hunt headshot|center|frameless|125x125px]]
|''' Art Hunt '''
|BOD Treasurer
|Elected,
November 2022
|}

|-
|[[File:Eman.jpg|alt=Eman Spencer headshot|center|frameless|130x130px]]
|'''Emmanuel (Eman) Spencer'''
|Newly elected,
November 1, 2022
|-
|[[File:Quinn.jpg|alt=Quinn Hackenberg headshot|center|frameless|130x130px]]
|'''Quinn Hackenberg'''
|Newly elected,
November 1, 2022
|-
|[[File:Marvin Harrell.png|alt=Marvin Harrell headshot|center|frameless|125x125px]]
|'''Marvin Harrell'''
|Newly elected,
November 1, 2022
|-
|[[File:Steve Leininger.jpg|alt=Steve Leininger headshot|center|frameless|125x125px]]
|'''Steve Leininger'''
|Newly elected,
November 1, 2022
|-
|[[File:Theresa Rigney.jpg|alt=Theresa Rigney headshot|center|frameless|125x125px]]
|'''Theresa Rigney'''
|Newly elected,
November 1, 2022
|-
|
[[File:Chris Stevens.jpg|alt=Chris Stevens headshot|frameless|center|125x125px]]
|'''Christopher Stevens'''
|Newly elected,
November 1, 2022
|}
'''Our Board of Directors can be contacted via Slack.'''

==Previous PPM Leaders==
{| class="wikitable sortable"
|+
!Picture
!Member
!Contact
!'''Title'''
|-
|[[File:Chris Vestal at the MAC.jpg|alt=Chris Vestal at the MAC|center|frameless|145x145px]]
|''' Chris Vestal   '''
|'''[https://www.instagram.com/motominded/ MotoMinded LLC]'''
(Instagram)
|PPM Founder  
|-
|Landon Descamps
|
|
|
|-
|Anthony Abraham
|
|
|
|-
|John Norton
|
|
|
|-
|[[File:Drew Johnson.jpg|center|frameless|125x125px]]
|''' Drew Johnson '''
|[https://techwears.com TechWears Ltd]
|Executive Director
July 2020 - May 2023
|}
 
[[File:Pikes Peak with snow.jpg|alt=Pikes Peak|left|thumb|400x400px|<center>Pikes Peak, America's Mountain, taken from our parking lot.
 
(February 18, 2022 10:20 AM)|link=https://wiki.pikespeakmakerspace.org/index.php/File:Pikes_Peak_with_snow.jpg]]
 
 
 
 

 
 
 

 

[[wikivoyage:Colorado_Springs|Wikivoyage]]  |  [https://www.visitcos.com/travel-tools/webcam/ Colorado Springs Webcams]  |  [https://weather.com/weather/today/l/c5baf779c6d5406f64806f25c9622372356cabc4d6418936e9785b3b58d4a2b0 Weather]  |  [https://www.google.com/maps/place/735+E+Pikes+Peak+Ave,+Colorado+Springs,+CO+80903/@38.8330369,-104.8137709,17z/data=!3m1!4b1!4m5!3m4!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!8m2!3d38.8330369!4d-104.8115822?hl=en Google Map]

 
<hr>
{{Template:Footer}}

[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-04-09T15:54:33Z

Drew: /* Cleaning up and Shutdown */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.
 
 
==Saw Stop Orientation==

===How to Become Certified===
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz by clicking this link here: https://forms.gle/rj4KknEj7ZKubrvi8
#Attend an in-person, hands-on SawStop class ($50)

===Getting Started===
'''<big>By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.</big>'''

====<big>Powering on the SawStop</big> ====
<big>'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''</big>
*The SawStop table saw will not turn on without scanning the RFID door card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
*Use the paddle switch to turn on and off the blade.
*After use, drop the blade into the cabinet, clean the saw, and log off.

====<big>Operating PPM's SawStop Table Saw</big> ====

*Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
*If the brake trips, contact the Woodshop Captains.
*Ensure the blade guards are kept clean and free of debris.
*Use dust collection.
*Report any damage or issues immediately.

====<big>Operating any Table Saw</big> ====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
*Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
*Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
*Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
*Always ensure the saw is off before making any adjustments to angle or height of the blade.
*Always use the folding outfeed table when ripping plywood or long stock.
*Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
*Never reach over the blade or make contact with the blade while it is in motion.
*Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
*Never use the miter gauge and the rip fence at the same time.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
*Do not cut too close to the fence.
*No dado cuts. The SawStop requires a special cartridge which we do not have.

====Avoiding Kickback====

*Kickback can occur when ripping boards. Keep to one side of the blade or other depending on the cut you are making. Stay away from standing directly behind the blade.
*You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
*Use the blade guards and riving knife.
*Miter gauge must be used on the right of the blade when bevel cutting.

====Cleaning up and Shutdown====
*
*Cleaning the saw
**Remove insert and clean around the blade with compressed air.
**Open the access panels (one on each side) and inspect the cabinet for saw dust.
***Clean the cabinet with a shopvac as necessary.
**Ensure dust collection is unclogged and functional.
***This can require disconnecting the 4" dust collection hose and shaking it out.
***Ensure blade access panel and dust door is closed (the one with the magnet). If left open, sawdust will fill the cabinet.
*Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
*Don’t leave any scraps - dispose of them in the bin or dumpster.
*Put all accessories (moisture meter, metal detector, miter gauge) back in the appropriate location.
*The SawStop should be perfectly clean and ready for the next user when you are done.
*Log out and clean up after each use or risk losing access to the saw.

====SawStop Captain Duties====

=====Maintenance Inspections=====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
*Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
*Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
*Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

=====Hands-on SawStop class=====
Instructors of the hands-on SawStop class will cover the following.
*
*
*
*
*
*

*How to check material for conductivity and avoid false triggers.
*The normal blade guard is used for rips and crosscuts.
*The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
*The limit rod should remain on the blade guard.
*The kickback pawls can be enabled or disabled depending on your needs.
*The blade height should be set so that the blade is 1/8 to 1/4 inch above the wood piece.

==SawStop Flesh Detection==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

*In the event of flesh detection, a single use cartridge fires and seizes the blade before the user is injured.
* Both the cartridge and blade must be replaced before the SawStop can be used again.

===Avoiding False Triggers===
Although uncommon, it is possible to have a false flesh detection. '''Users are responsible for the expense of brake and blade replacements required due to false activation of the safety system (about $150).'''

False triggers are caused by conductivity. One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger the blade brake. If green, that part of the material is unlikely to trigger.
#'''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
##Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
##Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##*By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
#'''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop table saw. The carbon is conductive and can trigger the cartridge
#'''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
#'''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating Styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested from the Executive Director.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS'''] -- sawstop.com

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
| Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|$6,000
|PPM
(delivered 02/05/23!)
|-
|[[File:Moisture Meter.jpg|alt=Moisture Meter|center|frameless|175x175px]]
|'''Moisture Meter'''
|[https://www.azunotools.com/home.html Azuno Tools]
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
(new 03/03/23)
|-
|[[File:METAL DETECTOR.jpg|alt=METAL DETECTOR|center|frameless|133x133px|link=https://wiki.pikespeakmakerspace.org/index.php/File:METAL_DETECTOR.jpg]]
|'''HAND HELD'''
'''METAL DETECTOR'''
|EASYVIEW TECHNOLOGY
|[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
|9V battery
|
|$20
|PPM
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve Equipment Reservations]===

===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''

== Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Rules and Policies

2023-04-05T01:05:44Z

Drew: /* NOTICE: THIS PAGE IS UNOFFICIAL */

== Notice: ==
These rules are subject to change at any time.

== You need to read all the fine print ==
Access to PPM is a privilege, not a right. Members of PPM are responsible for following all applicable rules and policies listed on this page. Violation of PPM policies and procedures can result in consequences up to and including membership termination.

These Safety Policies and Procedures have been implemented to ensure safe operations of equipment, the operator, other members, and the integrity of the facility. All members are required to implement safety procedures while at PPM. Members should only use equipment for which they have been certified for by a trained PPM instructor. Violations of safety policies will be reviewed based on harm, potential harm, and recurrence. Consequences may result based on severity of the violation, as decided by the Executive Director and the Board of Directors based on the PPM by-laws.

=== Recording in Progress ===
By entering Pikes Peak Makerspace, you consent to be recorded by audio and/or video technology. Recordings may be used for internal and/or external purposes, marketing, or safety review. They may be shared with law enforcement or other third parties as required by law. Please leave the premises immediately if you do not wish to be recorded.

===Rule and Policy Changes===
These rules and policies are subject to change at any time. Changes adopted with a vote from the Board of Directors and/or the membership at a membership meeting will become effective immediately. A summarized version of newly adopted rule(s) will be posted in the space and updated on this page; adapted as necessary for effective communication.

==Standards of Behavior==
#All guests and members must follow the [https://wiki.pikespeakmakerspace.org/index.php/New_Member_Orientation#Member_Code_of_Conduct Member Code of Conduct.]
#Safety is important, if you are unsure of how to safely do something, don’t do it.
#The Executive Director or a member of the Board of Directors may ban anyone who violates the Rules and Policies from the premises or online systems. Bans may be appealed in accordance with the Bylaws.
#Don't merely respect each other; be excellent to each other.
#*We are all here to make things and learn. Every Maker is on their own journey.
#*Don't be afraid to ask questions.
#*Be helpful and answer questions when you can. If you don't know the correct answer, say so. Don't make something up.
#Respect the space
#*When you break something, own up to it. If you have any doubt about fixing it, ask for help.
#*Don't make someone feel bad for breaking things, help them understand what went wrong.
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.
#*Tools/resources are shared by all members and must stay on the premises at all times.
#Operate only those machines and equipment you have been specifically trained and certified to use by a PPM instructor.
#Members are not allowed to work in the Makerspace when intoxicated, under the influence of controlled substances, sleep deprived, or emotionally distressed.
#Sleeping is not cool, but naps are ok. We are not a hotel nor a place to hide out.
#All members are expected to maintain a safe and clean environment at all times.
#Smoking cigarettes, cigars or vaporizers is prohibited inside the building.
#Do not hack our computer systems. Do not to install unapproved/illegal software.
#Do not make alterations or perform major repairs on any equipment without specific permission from the Executive Director.
#It is the responsibility of each member to help enforce the Standards of Behavior. If someone is violating the Member Code of Conduct or the Standards of Behavior, politely explain to them why their behavior is not acceptable. Egregious violations should be reported to the Executive Director or the Board of Directors.

===Guests===
#Guests can not occupy the Pikes Peak Makerspace without another keyed Member present.
#Guests must sign the [https://app.waiverforever.com/pending/fjyagIyDaB1593209306 Waiver of Liability] before entering the building.
#Members may not have guests for the first 30 days.
#Guests are encouraged to become Members. A member referral bonus is available.
#Guests are not allowed to use tools and equipment, except as part of a scheduled class/workshop.
#Members are responsible for their Guest's actions, behavior, and safety.

===Minors===
#Minors 18 and under are not eligible for membership nor have an RFID access card to the space.
#Minors 18 and under are permitted in the space under limited circumstances only and must be accompanied closely by Parent or Legal Guardian at all times.
##Limited circumstances means PPM-hosted family events, tours, or brief visits.
##Accompanied closely means visual range generally, and never in the shop near dangerous tools.
#Parents/Legal Guardians are responsible for their children's actions, behavior, and safety.

=== Pets and Service Animals ===
Pets are NOT allowed in common areas of the building. Service animals are exempted.

===Non-Discrimination Policy===
At Pikes Peak Makerspace, we work together to create a community where members are given the opportunity to engage in new experiences, develop new skills, and express their creativity. We welcome interested members regardless of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status. We celebrate a creative space that embraces the richness of our community and is safe and inclusive for all members. We do not tolerate discrimination, biases, harassment or bullying of any kind.

==Membership Dues==
Members are responsible for managing their recurring payments and canceling their membership. You may do so by logging in to your membership portal with the link from your most recent receipt. You may also request assistance from the Executive Director or Deputy Director via Slack, email, website contact form, or in person.

Payments that bounce have 7 days to update before the membership is cancelled. You may not use the facility while your payment is past due.

All dues are paid in advance and are recurring. Monthly subscriptions must be paid by credit card. Annual or Lifetime memberships can be paid by check or credit card.
{| class="wikitable sortable"
|-
!Plan Name!!Rate !!Notes
|-
| Monthly Membership||$55/mo||Our standard membership.
|-
|2 Card Bundle
|$75/mo
|2 memberships
|-
|Student Membership||$35/mo||This rate is for members who are currently in school.
|-
|Annual Membership||$605/year|| One month free ($55x11 months paid up front)
|-
|Annual 2 Card Bundle
|$825/year
| One month free ($75x11 months paid up front
|-
|Lifetime ||$5000 ||Non-transferrable.
|}
Corporate memberships available, contact us through the website.

A limited number of private dedicated spaces are currently in use. If you are interested in a dedicated workspace, please inquire about joining our waitlist.

=== Voting Rights===
#Members may vote on questions presented at Member Meetings of the Board of Directors.
#Please refer to the Bylaws for more detail about voting rights.

==Storage ==
We are not a storage facility. Do not leave personal items and projects laying around in common areas. Additionally, observe the following storage policies.

=== Project Storage===
#Projects must be actively attended to until completed and/or removed from the building.
#Woodshop/Metal Shop projects may be kept on site for up to 7 days as long as the following conditions are met:
##Green Project Storage Tags must be used in the woodshop/metal shop.
## Projects must be stored out of the way. (Under tables, in shed, etc)
##After 1 week, you must either remove your project, or fill out a new green tag for another week. Additional weeks are a suggested $10 donation with a max of 4 total weeks.
##If your tag has expired, a PPM leader may reach out to you to remove your project.
##If one week has passed since contacting you and action has not been taken, your project will be considered abandoned and removed from site or the materials made available to other members
##Be sure your project storage tag is completely filled out with the following information
###Name
### Todays Date
###Expected Completion Date
###What I’m Making
###Contact Info
#On a case by case basis and as space allows, longer term storage may be approved by the Executive Director and/or Board of Directors.

===Personal Item Storage===
Floorspace is extremely valuable and it is important that the space remain easy to clean and keep organized. Therefore, storage in the front of the building is restricted to lockers and shelves.

*Lockers - $5/month
**Must set up recurring payment through [https://bit.ly/ppmstuff PayPal]
***Be sure to select "Make this a recurring payment"
**You name must be displayed on the outside of the locker.
**Limited quantities available
*Shelf space - $25-$75/month
**Large Totes- $25/month
***Up to 3 can fit on a shelf
***Must set up recurring payment through [https://bit.ly/ppmstuff PayPal]

Small items and sheet materials should be labeled with a date or they are at risk of being removed or used by another member.

==Inventory of Parts, Tools, and Equipment==
#Anything in a work area is available for use by all members unless otherwise documented/labeled.
#Items that require training may be secured, but a path to obtain use of said item should be documented.
#Consumables and other items of value should be reimbursed or a donation made for them.
#Items to be considered on display and not storage have to be in a designated area or approved by shop operations.

==Events ==
#Scheduled events take priority over "first come, first serve."
# Scheduled events should align with the organizations goals.
# All events must be sponsored and attended by a current member.
#Donations to the space are encouraged but not required to hold events.
#Guest access to the facility will be limited, and guests may be required to sign waivers before attending the event.

=== Classes ===
Members are encouraged to seek assist from and provided assistance to other members. Hosting classes is a great way to share skills and knowledge.

Instructors must follow the Members Code of Conduct as well as all Rules and Policies posted on this Wiki page.

Do not engage in any activity that unreasonably interferes with other member's usage of the space, regular scheduled events or reserved equipment.

Process for hosting a class:

Requests for the use of the space to hold classes can be made by:

- Filling out this [https://forms.gle/PTrNX9yfuq19F4mVA Event Planning Submission Form]

- Contacting Event Coordinators:

Anyone on the SMECO committee

Executive or Deputy Director

- Reserving the space on the reservation system

Events or classes involving 5 or more people requires approval and reservation of the needed space/equipment.

Committee meetings and small gatherings between members is permitted in most cases without direct approval of the Executive team or SMECO committee as long as abiding by the code of conduct and rules of the space.

One-on-one coaching, assistance or mentorship does not require prior approval.

Any member wishing to charge a fee for hosting a class must seek prior approval. Fees and promotions will be managed by PPM Event Administrators.

Instructors and PPM will share the revenue from the class. Instructors are compensated based on a sliding scale according to skill, time, effort, materials, usage of the space, equipment requirements, and/or other variables as determined by PPM Event Coordinators.

The final cost of the class and instructor compensation will be negotiated between the instructor and an Event Coordinator.

===Types of Organizational Meetings===
#The Board of Directors holds regular meetings and will announce meetings via email and Slack. Members are welcome to attend.
#Classes may be organized and taught by any member in good standing.
#Community events should support the goals of Pikes Peak Makerspace.
#If an event requires funding, the event proposal form must be submitted.
#Membership meetings for projects and community building will be posted on the Pikes Peak Makerspace Events calendar and promoted on Slack.
##Membership meetings should always include an act of service to the space such as cleaning or updating computers.

==Program Areas (Woodshop, Metal Shop, Lasers, 3D Printing, etc)==
Existing Program Areas should have designated Captains to perform critical maintenance and repair tasks.

A Captain is a volunteer position who keeps the program area in alignment with the goals of the organization and in line with all rules and procedures. There may be a Captain of an entire work area, or a Captain of just a particular tool.

The Captain serves as the main point of contact for the program area or tool.

If you are interested in becoming a captain, please contact the Executive Director or a member of the Shop Operations committee.

Please see [[Shared Tools and Map|Shared Equipment]] for the current directory of PPM Program Areas.

==Committees==
Pikes Peak Makerspace is a volunteer driven creative space. Everything good that happens is because a member or a committee saw the potential and took the initiative to make it happen.

The Board of Directors develops, tasks, and supports the Committees most critical to the organization.

===Board Committees===
Finance
*Chair: Art Hunt
Fundraising and Grants
*Chair: Emmanuel Spencer
Information Technology
*Chair: Jason Taylor
Personnel
*Chair: Joshua Harlow
Policy
*Chair: Drew Johnson
Safety
*Chair: Theresa Rigney
Shop Operations
*Chair: Quinn Hackenburg
Social Media, Events, Community Outreach (SMECO)
*Chair: Lisa MacNicol
===Project Committees===
Long term projects that everyone can participate in:

TESLA (Tools Enabled Safely and Library Access)
*Chair: Jason Taylor
Wiki
*Chair: Warren Jokinen
Emma Crawford Coffin Race

* The race is the last day of October each year.

=== Member Driven Committees ===
Member driven initiatives for new programs and work areas must meet the following criteria:
#Project committees that impact the way the space operates must be approved by the Executive Director and/or the Shop Operations Committee.
#Committee must select a chair persons as the primary point of contact and accountability.
#The Committee chair person will be responsible for providing reports on the status and activities of the committee.
#Each committee is expected to communicate activities to members via Slack, signage, or the wiki. The following information should always be kept current and available for all members to see.
##The name of the committee chair
## A brief statement listing the goals or tasks assigned to the committee.
##How other members can get involved.
#Committee meetings must be posted on the calendar and announced on Slack.
#Committees can appoint advisory members who are not members of PPM when necessary.

==Commercial Use ==
Pikes Peak Makerspace is a great place to prototype, experiment, and develop your product ideas. When it comes to production runs, the priorities of the organization may require limiting access to the equipment for commercial ventures. The organization exists as a hackerspace and is not designed as a production shop.

The Pikes Peak Makerspace is based on open source ideals and thus encourages its membership to embrace those ideals as well, however members do reserve the rights to all of their creations.

==Loaning of Tools & Equipment To The Makerspace==
Members can give generously to PPM by donating or lending tools or equipment for use in the space.

When equipment is loaned, the following conditions apply:

#All loaned equipment must be marked or labeled with the owner's name and two or more points of contact.
#The owner must contact the Shop Operations Chair so that they can record the following information:
## Name of owner
##Equipment being loaned
##Serial number if available
##Terms or conditions of the loan
#As the owner, if you must be contacted for others to use your tool, you must clearly document this requirement on the tool.
#If a personal item on loan requires training to be used, training sessions must be offered at least once per month or the item will be subject to removal.
#Equipment is loaned subject to the understanding that it is preferable for PPM to own their equipment, rather than borrow it. PPM may seek to buy equipment in order to replace loaned items, which are then returned.
#Loaned items may be returned at any time, by request of the owner or as determined by the Shop Operations Committee.
#PPM is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the Shop Operations Committee.
#PPM is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.

==Prohibited Items==

=== Firearms ===
PPM members are prohibited from carrying, making, or cleaning firearms inside of the space. Additionally, firearm parts, ammunition, and modifications may not be done inside the space.

Objects that may be perceived as firearms must be cleared with the Executive Director and/or the Board of Directors.

=== Deadly Weapons ===
Any item intended to cause physical harm or destruction is prohibited at PPM. If you feel that the item you are making is a borderline case, please seek clarification from the Board of Directors before moving forward.

==Donations==
THIS POLICY TO BE UPDATED
#All donations must be approved by the committee/captain in charge of the location in which the item will be stored/used.
#The following items will not be accepted for donation:
##CRT Monitors
#Financial donors may request the funds be used for a specific project or department. Any agreement made will honor the request and allocate the money appropriately. PPM reserves the right to return to the donor and ask for approval to reallocate the funds elsewhere. The donor reserves the right to reject the request.

==Finance==
Members are required to manage their own recurring payments. Refunds may not be issued for any portion of time in which the space was not used.

=== How to cancel ===
If you need to cancel your membership and stop the monthly payments, please do one of the following:

* Open the most recent payment receipt in your email inbox and use the link to login to your membership and cancel.
* Notify us at contact@pikespeakmakerspace.org and a Director will take care of it for you.

=== Payments ===
All members must be set up on automatically recurring payments.

If your payment bounces, please take care of it immediately.

* Your payment method will be attempted 4 additional times over the course of seven days.
* Do not use the space while your membership is past due.
* After seven days, your membership will be cancelled and you will need to reactivate your membership again to start over.

==Notes==
These notes are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.

[[Category:Incomplete]]

New Member Orientation

2023-04-04T15:25:53Z

Drew: /* Paying for Consumables */

{{Template:Member Code of Conduct}}

{{Template:Safety}}

==Managing your Membership==
'''•''' '''Join It''' is used to manage your membership. Before completing New Member Orientation, you must have signed up in [https://www.joinit.org/o/pikes-peak-makerspace Join It] to begin your recurring payments. During this step, you will also sign our liability waiver and membership agreement.

'''•''' Any guests entering the space must [https://bit.ly/ppmwaiver sign the liability waiver]

'''•''' NOTE: In addition to Join It, the following software is used to facilitate your membership:

'''•''' '''Slack''' is the official communication channel of PPM. Check your membership confirmation email for a link to join the workspace! If you need help getting started with Slack, let us know!

'''•''' Slack is organized by #channel-topics (i.e.: #general, #woodshop, #laser-cutters, #job-board, etc.)

'''•''' Important documents can be found in Slack channels under "pinned" files (i.e.: Software license info, video training, links to wiki etc.)

'''•''' '''Stripe''' collects the recurring payments set up in Join It.

'''•''' [https://bit.ly/ppmstuff PayPal] - Donations and reimbursement for consumables, payment for classes on Meetup. You do not have to have a PayPal account to send a credit credit payment.

'''•''' [https://www.meetup.com/pikespeakmakerspace/events/ Meetup] - Used to schedule classes and collect payments for tickets (via PayPal).

==Member Benefits==
PPM members enjoy discounts at the following local merchants:

(walk in, show proof of membership)
{| class="wikitable sortable"
|+
!Company
!Website
!Benefit
!Directions to
|-
|[[File:Logo WOODCRAFT.jpg|alt=Logo WOODCRAFT|center|frameless|120x120px]]
|'''[https://www.woodcraft.com/stores/colorado-springs Woodcraft of Colorado Springs]'''
|10% discount   
|[https://www.google.com/maps/dir/735+E+Pikes+Peak+Ave,+Colorado+Springs,+CO+80903/4438+Austin+Bluffs+Pkwy,+Colorado+Springs,+CO+80918/@38.8640832,-104.8155216,13z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!2m2!1d-104.8115822!2d38.8330369!1m5!1m1!1s0x871348b57b304d7b:0x41633dc0111dd545!2m2!1d-104.7495772!2d38.8960843 '''4438 Austin Bluffs Parkway''']
|-
|[[File:Logo CO Lumber.png|alt=Logo CO Lumber|center|frameless|120x120px]]
|'''[https://columber.net/ CO Lumber Specialties]'''
|10% discount
|[https://www.google.com/maps/dir/735+E+Pikes+Peak+Ave,+Colorado+Springs,+CO+80903/3636+N+Stone+Ave,+Colorado+Springs,+CO+80907/@38.8592252,-104.8510654,13z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!2m2!1d-104.8115822!2d38.8330369!1m5!1m1!1s0x87134f95d9a1ed47:0x7ee3f5e71bd8f6f1!2m2!1d-104.8164608!2d38.8855816 '''3636 Stone Avenue''']
|-
|[[File:Logo General Air.png|alt=Logo General Air|center|frameless|120x120px]]
|'''[https://www.generalair.com/colorado-springs/ GENERAL AIR]'''
|10% discount
|[https://www.google.com/maps/dir/735+East+Pikes+Peak+Avenue,+Colorado+Springs,+CO/3031+N+Nevada+Ave,+Colorado+Springs,+CO+80907/@38.854232,-104.8510654,13z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!2m2!1d-104.8115822!2d38.8330369!1m5!1m1!1s0x87134f8d9b70fc95:0x860d99e3f06a9c6a!2m2!1d-104.8187634!2d38.8760784 '''3031 N Nevada Ave.''']
|-
|[[File:Logo ACE.png|alt=Logo ACE|center|frameless|60x60px]]
|'''[https://www.acehardware.com/store-details/14531 ACE Hardware Uintah Gardens]'''
|10% discount
|[https://www.google.com/maps/dir/735+East+Pikes+Peak+Avenue,+Colorado+Springs,+CO/1830+B+W+Uintah+St,+Colorado+Springs,+CO+80904/@38.8417527,-104.8496379,14z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x8713451b3f4d8a5d:0x9cdb13d58ec1500d!2m2!1d-104.8115822!2d38.8330369!1m5!1m1!1s0x87135ab25357c61f:0xd67ec4e1eda1161c!2m2!1d-104.848791!2d38.8501225 '''1830 W Uintah Street''']
|}
:'''[https://www.google.com/maps/d/viewer?mid=1w64QIMzgcL5asnWsHt--_SfCBWMR6G0I&ll=38.87337097871852%2C-104.76426397564956&z=12 Map of stores that provide PPM member discounts]'''
:'''[https://www.google.com/maps/d/edit?mid=1RAjYygu317P2n9vz9k_NNo84QnjfAFMZ&usp=sharing Map of helpful local resources curated by our makers]'''

:Additionally, we have a Slack channel (#job-board) for members to post, discuss, or accept job opportunities either within PPM or from the community.
==Physical Space Safety==
Fire extinguishers, first aid kits, eye washes stations, and exit doors should always be accessible. Please do not place any objects that could obstruct direct access to these safety features!

=== Front Door Security===

====Use the peep hole!====
Do not answer the door unless you are confident the visitor is appropriate or you are capable of handling them. People come to the door to ask for money, use your cellphone, or sell you something. Be aware that you are responsible for your safety and the security of the building when you open the door.

====Packages and Mail====
FedEx, UPS, Amazon, USPS,... they all use the ring doorbell to deliver packages. So if you hear the doorbell, please check the peephole and answer it if you are comfortable.

It is fine to have your supply packages delivered to the Makerspace. Have your name added to the address label and look for it near the front door. Don't leave packages around for long.

[[File:Escape Routes.png|thumb|Evacuation plan for 735 E Pikes Peak Ave]]

==Reporting Injuries==
'''•''' Report any injuries, or near misses, to the Executive Director using an incidence report which can be found on the Safety Board.

==Red Tags==
'''•''' Any damage to tools or broken equipment MUST be reported in a direct message to a space leader/Director.

'''•''' Use a Red Tag, which can be found in the '''[[:File:RED TAG AREA.jpg|red tag area]]''', to designate the broken equipment.

'''•''' Additionally, report the issue in our Slack #red-tags channel.

==Last One Out Rules==
After you have cleaned up and you are ready to head out, check to see if you are the only one in the building.

If so, you are required to check each of the following.

There is a sign posted on both the front and back door for quick reference.
[[File:Chiller and Exhaust Switch.jpg|thumb|225x225px|Exhaust Fan & Chiller Switch]]
'''•''' '''All appropriate equipment is powered off'''

'''•''' '''Shed Door''' (in South parking lot) is closed and locked

'''•''' '''South Door''' is closed and locked

'''•''' '''South Overhead Door''' is closed and locked (BOTH SIDES!)

'''•''' '''Exhaust Fan and Chiller''' for laser cutters is off (Switch column between laser machines)

'''•''' '''Dust Collection''' is turned off (CNC Room, Sanding Station, Table Saw) If you can't find the switch, unplug motor.

'''•''' '''East Door''' closed and locked (Orange tape should be aligned).

'''•''' '''Lights in Woodshop off''' (Switch located outside of Woodshop doors, right side)

'''•''' '''North Overhead Door''' is closed and locked (BOTH SIDES!)

'''•''' '''All Appropriate Lights''' are turned off (See bank of switches by the front door).

'''•''' '''Verify the door locks behind you!'''

==Using the Space==

=== If I have a question...===
As a new member, you'll be learning the ropes and there is a lot to know! There is not always someone available to help, but the answer you seek is probably detailed in the resources our volunteers (members) have created just for you.

This is the preferred sequence of seeking answers and information.

#[[Main Page|'''Check the Wiki''']] (If your question is not on the Wiki and it should be, please let us know!)
# Ask members and Area Captains on Slack
#Use our [https://pikespeakmakerspace.org/Contact '''"Contact Us"'''] form on the PPM website
#Ask a Director

===Equipment Access===
Equipment at PPM is categorized into the following levels:

*Level 1 - No training required

*Level 2 - Training and/or equipment *buy-in* required
*Level 3 - '''Required to be certified''' under supervision of a PPM Captain, or by taking a certification course listed on Meetup

Before using the woodshop, metal shop, 3D printers, lasers, or other PPM owned equipment, you must certify by taking a certification course listed on [https://www.meetup.com/pikespeakmakerspace/events/ Meetup].

If you have previous experience with specific equipment, you can be certified by an area leader but we ask that you still "buy-in" (pay for the course) to the equipment to support the maintenance and upkeep of the machines (i.e. saw sharpening, laser lens, print toner, etc.)

===Cleaning Up===

*Always leave the space better than you found it.

* If you see the trash can is more than 3/4 full, take it out! Don't play Jenga with garbage. If you are the first one to see it getting full, you are the one responsible for emptying it.
* Trash bags can be found in the bathrooms.
*The garbage dumpster is located outside the South door.
*Recycling is collected in 96 gallon totes (2 of them) and are picked up every two weeks.

*Always label your project and make sure it is not in the way of other members.

===Paying for Consumables ===
Things like woodglue, 3D print filament, blue tape, sheet stock for the lasers, etc are not free. Use the QR (paypal) codes throughout the space, this link [https://ww.bit.ly/ppmstuff www.bit.ly/ppmstuff] , or a cash box with a note about what you used paperclipped to the cash.

===Guest Policy===

====Guest Permissions and Liability Waiver====
As a member, you signed our liability waiver when you created your membership. If you would like to review the waiver, visit [https://Www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]

Anyone visiting the space for any reason other than a basic tour must sign the liability waiver at [https://Www.bit.ly/ppmwaiver www.bit.ly/ppmwaiver]

*'''This is important for all the below reasons:'''
**It communicates that all guests are responsible for their own safety
**It makes guests consider the "no lifeguard on duty/ swim at your own risk" aspect of the place they are entering
**It gives us (the member signing them in) an opportunity to talk about safety with the guests

Guests may not operate equipment owned by Pikes Peak Makerspace.

Guests must be over 18 years old to sign the liability waiver.

Frequent guests are encouraged to get a membership.
===Member Storage===
It is ideal that you to use the space to build amazing things, no matter the size! However, it is a problem when project builds occupy valuable space in a way that prevents others from using the space. We are not a storage facility.

Therefore, please observe the following practices in regards to storing your project and tools.

#If leaving your project overnight or for multiple nights, make sure it is occupying as little space as possible and that is easy for other members to work around!
#Label your project in process with your name, expected "return to work" date, and phone number or contact information!
#Do not, under any circumstances, leave items untouched for more than 30 days. Anything that you leave here must be picked up and used at minimum once per month or it does not belong here!
#Keep your items organized and easy to move.
# Overflowing totes are not OK!

===Dedicated Spaces===
Dedicated Spaces are private work areas and should not be entered without permission.

==='''Computers and Personal Devices'''===
The computer login information and wi-fi network credentials can be found on white boards in the space. [On the right of the FIRST AID Supply Cabinet]

Login Password: [Written on white board just to the right of the FIRST AID Supply Cabinet]

====PPM Computer Rules====
Please use computers for professional use (no cruising Facebook/ pointless browsing)

Members are not given personal logins or passwords; backup work on an external storage device.

Do not leave any messes in any workspace (anything without a name can be tossed or relocated to lost and found).

====Share Drive====
The s:/ drive is a shared network drive available on all PPM computers. All you need to do to enjoy it is create a folder for yourself in the drive!

There are 3 rules:

#Files might be removed automatically after 2 months.
#Do not store files in the main folder directory.
#Keep your own backup! We are not responsible if your data becomes lost or corrupted in any way!

'''This shared drive is visible to all members. If you need security, do not use this drive.'''
 
 
<hr>
{{Template:Footer}}

Wood Shop — SawStop table saw

2023-03-10T18:59:07Z

Drew: /* Hands-on SawStop class */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.
 
 
==Saw Stop Orientation==

===How to Become Certified===
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz by clicking this link here: https://forms.gle/rj4KknEj7ZKubrvi8
#Attend an in-person, hands-on SawStop class ($50)

===Getting Started===
'''<big>By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.</big>'''

====<big>Powering on the SawStop</big> ====
<big>'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''</big>
*The SawStop table saw will not turn on without scanning the RFID door card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
*Use the paddle switch to turn on and off the blade.
*After use, drop the blade into the cabinet, clean the saw, and log off.

====<big>Operating PPM's SawStop Table Saw</big> ====

*Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
*If the brake trips, contact the Woodshop Captains.
*Ensure the blade guards are kept clean and free of debris.
*Use dust collection.
*Report any damage or issues immediately.

====<big>Operating any Table Saw</big> ====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
*Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
*Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
*Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
*Always ensure the saw is off before making any adjustments to angle or height of the blade.
*Always use the folding outfeed table when ripping plywood or long stock.
*Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
*Never reach over the blade or make contact with the blade while it is in motion.
*Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
*Never use the miter gauge and the rip fence at the same time.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
*Do not cut too close to the fence.
*No dado cuts. The SawStop requires a special cartridge which we do not have.

====Avoiding Kickback====

*Kickback can occur when ripping boards. Keep to one side of the blade or other depending on the cut you are making. Stay away from standing directly behind the blade.
*You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
*Use the blade guards and riving knife.
*Miter gauge must be used on the right of the blade when bevel cutting.

====Cleaning up and Shutdown====
*
*Lower the blade into the cabinet after use and clean the saw.
*Clean the blade guards after each use with compressed air.
*Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
*Close the dust door below the table surface (?)
*Don’t leave any scraps - dispose of them in the bin or dumpster.
*Put all accessories (moisture meter, metal detector, miter gauge) back in the appropriate location.
*The SawStop should be perfectly clean and ready for the next user when you are done.
*Log out and clean up after each use or risk losing access to the saw.

====SawStop Captain Duties====

=====Maintenance Inspections=====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
*Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
*Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
*Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

=====Hands-on SawStop class=====
Instructors of the hands-on SawStop class will cover the following.
*
*
*
*
*
*

*How to check material for conductivity and avoid false triggers.
*The normal blade guard is used for rips and crosscuts.
*The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
*The limit rod should remain on the blade guard.
*The kickback pawls can be enabled or disabled depending on your needs.
*The blade height should be set so that the blade is 1/8 to 1/4 inch above the wood piece.

==SawStop Flesh Detection==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

*In the event of flesh detection, a single use cartridge fires and seizes the blade before the user is injured.
* Both the cartridge and blade must be replaced before the SawStop can be used again.

===Avoiding False Triggers===
Although uncommon, it is possible to have a false flesh detection. '''Users are responsible for the expense of brake and blade replacements required due to false activation of the safety system (about $150).'''

False triggers are caused by conductivity. One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger the blade brake. If green, that part of the material is unlikely to trigger.
#'''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
##Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
##Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##*By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
#'''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop table saw. The carbon is conductive and can trigger the cartridge
#'''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
#'''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating Styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested from the Executive Director.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS'''] -- sawstop.com

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
| Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|$6,000
|PPM
(delivered 02/05/23!)
|-
|[[File:Moisture Meter.jpg|alt=Moisture Meter|center|frameless|175x175px]]
|'''Moisture Meter'''
|[https://www.azunotools.com/home.html Azuno Tools]
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
(new 03/03/23)
|-
|[[File:METAL DETECTOR.jpg|alt=METAL DETECTOR|center|frameless|133x133px|link=https://wiki.pikespeakmakerspace.org/index.php/File:METAL_DETECTOR.jpg]]
|'''HAND HELD'''
'''METAL DETECTOR'''
|EASYVIEW TECHNOLOGY
|[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
|9V battery
|
|$20
|PPM
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''

== Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-05T14:59:15Z

Drew: /* How to Become Certified */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.

 
== Saw Stop Orientation ==

=== How to Become Certified ===
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz by clicking this link here: https://forms.gle/rj4KknEj7ZKubrvi8
# Attend an in-person, hands-on SawStop class ($50)

=== Getting Started ===
'''<big>By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.</big>'''

==== <big>Powering on the SawStop</big> ====
<big>'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''</big>
* The SawStop table saw will not turn on without scanning the RFID door card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

==== <big>Operating PPM's SawStop Table Saw</big> ====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

==== <big>Operating any Table Saw</big> ====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Never use the miter gauge and the rip fence at the same time.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.
* No dado cuts. The SawStop requires a special cartridge which we do not have.

==== Avoiding Kickback ====

* Kickback can occur when ripping boards. Keep to one side of the blade or other depending on the cut you are making. Stay away from standing directly behind the blade.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

==== Cleaning up and Shutdown ====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Put all accessories (moisture meter, metal detector, miter gauge) back in the appropiate location.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands-on SawStop class =====
Instructors of the hands-on SawStop class will cover the following.
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before the user is injured.
* Both the cartridge and blade must be replaced before the SawStop can be used again.

=== Avoiding False Triggers ===
Although uncommon, it is possible to have a false flesh detection. '''Users are responsible for the expense of brake and blade replacements required due to false activation of the safety system (about $150).'''

False triggers are caused by conductivity. One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger the blade brake. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop table saw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested from the Executive Director.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS'''] -- sawstop.com

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|[[File:Moisture Meter.jpg|alt=Moisture Meter|center|frameless|175x175px]]
|'''Moisture Meter'''
|[https://www.azunotools.com/home.html Azuno Tools]
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
(new 03/03/23)
|-
|[[File:METAL DETECTOR.jpg|alt=METAL DETECTOR|center|frameless|133x133px|link=https://wiki.pikespeakmakerspace.org/index.php/File:METAL_DETECTOR.jpg]]
|'''HAND HELD'''
'''METAL DETECTOR'''
|EASYVIEW TECHNOLOGY
|[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
|9V battery
|
|$20
|PPM
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T23:47:25Z

Drew: /* Operating any Table Saw */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.

 
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz by clicking this link here: https://forms.gle/rj4KknEj7ZKubrvi8
# Attend an in-person, hands-on SawStop class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Never use the miter gauge and the rip fence at the same time.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Put all accessories (moisture meter, metal detector, miter gauge) back in the appropiate location.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands-on SawStop class =====
'''Instructors of the hands-on SawStop class will cover the following.'''
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before the user is injured.
* Both the cartridge and blade must be replaced before the SawStop can be used again.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''Users are responsible for the expense of brake and blade replacements required due to false activation of the safety system (about $150).'''

False triggers are caused by conductivity. One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger the blade brake. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested from the Executive Director.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS'''] -- sawstop.com

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|[[File:Moisture Meter.jpg|alt=Moisture Meter|center|frameless|175x175px]]
|'''Moisture Meter'''
|[https://www.azunotools.com/home.html Azuno Tools]
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
(new 03/03/23)
|-
|[[File:METAL DETECTOR.jpg|alt=METAL DETECTOR|center|frameless|133x133px|link=https://wiki.pikespeakmakerspace.org/index.php/File:METAL_DETECTOR.jpg]]
|'''HAND HELD'''
'''METAL DETECTOR'''
|EASYVIEW TECHNOLOGY
|[https://www.securinadetection.com/product/Security-Portable-Handheld-Metal-Detector-GC-101H.html GC-101H]
|9V battery
|
|$20
|PPM
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T22:21:13Z

Drew:

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.

 
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz by clicking this link here: https://forms.gle/rj4KknEj7ZKubrvi8
# Attend an in-person, hands-on SawStop class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands-on SawStop class =====
'''Instructors of the hands-on SawStop class will cover the following.'''
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before the user is injured.
* Both the cartridge and blade must be replaced before the SawStop can be used again.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''Users are responsible for the expense of brake and blade replacements required due to false activation of the safety system (about $150).'''

False triggers are caused by conductivity. One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger the blade brake. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested from the Executive Director.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|
|Moisture Meter
|Anzuno
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
|-
|
|Metal Detection Wand
|
|
|
|
|
|
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T22:10:44Z

Drew:

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.

 
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''

One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|
|Moisture Meter
|Anzuno
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
|-
|
|Metal Detection Wand
|
|
|
|
|
|
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T20:11:59Z

Drew:

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

The SawStop Tablesaw is a level 3 tool in the [[Wood Shop| Wood Shop Area ]]. Which requires individual certification before use.

The saw cannot be turned on without scanning the RFID card of a certified member in the TESLA system.

 

== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''

One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|
|Moisture Meter
|Anzuno
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
|-
|
|Metal Detection Wand
|
|
|
|
|
|
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T17:09:53Z

Drew: /* Avoiding False Triggers */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* How to check material for conductivity and avoid false triggers.
* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''

One way to check if your material is conductive is to hold it against the blade with the saw off and look at the indication lights. If red, it will trigger. If green, that part of the material is unlikely to trigger.
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|
|Moisture Meter
|Anzuno
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
|-
|
|Metal Detection Wand
|
|
|
|
|
|
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T16:58:32Z

Drew: /* SawStop Equipment List */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|
|Moisture Meter
|Anzuno
|WMM09A01
|AAA Battery (x2)
|
|$30
|PPM
|-
|
|Metal Detection Wand
|
|
|
|
|
|
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T16:53:13Z

Drew:

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T16:49:55Z

Drew: /* Avoiding Kickback */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.
* Always ensure the saw is off before making any adjustments to angle or height of the blade.
* Always use the folding outfeed table when ripping plywood or long stock.
* Always use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Never reach over the blade or make contact with the blade while it is in motion.
* Never use the zero clearance insert on angled cuts. It is for 90 degree cuts only.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.

===== Avoiding Kickback =====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter gauge, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.
* Miter gauge must be used on the right of the blade when bevel cutting.

===== Cleaning up and Shutdown =====
*
* Lower the blade into the cabinet after use and clean the saw.
* Clean the blade guards after each use with compressed air.
* Inspect blade, and notify shop Captain if the blade needs to be cleaned.
* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface (?)
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* The SawStop should be perfectly clean and ready for the next user when you are done.
* Log out and clean up after each use or risk losing access to the saw.

==== SawStop Captain Duties ====

===== Maintenance Inspections =====
* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.

===== Hands on SawStop class =====
*
*
*
*
*
*

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

==SawStop Flesh Detection ==
The 5HP SawStop Industrial Cabinet Saw is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. '''If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).'''
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the SawStop tablesaw. The carbon is conductive and can trigger the cartridge
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood! However, this is no guarantee as non-ferrous metals like aluminum can trigger the flesh detection system. (ie: insulating styrofoam with a aluminum foil lining)
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|}
===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T16:29:46Z

Drew: /* Avoiding Kickback */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the following are permitted to use the SawStop.

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for brake and blade replacements required due to false activation of the safety system.'''

===== Powering on the SawStop =====
'''Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.'''

* The SawStop table saw will not turn on without scanning the RFID card of an authorized user.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the paddle switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

===== Operating PPM's SawStop Table Saw =====

* Do not make adjustments to the saw, adjust the fence, or change the blade without shop Captain approval.
* If the brake trips, contact the Woodshop Captains.
* Ensure the blade guards are kept clean and free of debris.
* Use dust collection.
* Report any damage or issues immediately.

===== Operating any Table Saw =====
* Always use the blade guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always unplug the power cord before making any adjustments to the blade.
* When ripping plywood or long stock, use the folding outfeed table.
* Never reach over the blade or make contact with the blade while it is in motion.
* Use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence.
* Turn off the saw and unplug it before making adjustments to blade angle and height.

==== Avoiding Kickback ====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter guage, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.

SHutting down

Use the blade guards and clean them after each use with compressed air.
V. .

*
* Lower the blade into the cabinet after use and clean the saw.

Maintenance and Safety Tips

* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.
Safety First: The purpose of the class is to promote safe use of the SawStop and develop safe habits. Communication is key - inform other users in the workspace before operating the saw and make sure the area is clear. Report any damaged tools or safety incidents to the Woodshop Captains.

*
*
*
*
*
*

Instructor-led Demonstrations:

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

Cleaning Up:

* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface.
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Log out and clean up after each use or risk losing access to the saw.

==SawStop Flesh Detection ==
PPM has a 5HP SawStop table saw. It is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the tablesaw.
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a nail, screw, or staple will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood!
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|} 

===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
:A '''[https://www.sawstop.com/why-sawstop/ SawStop table saw]''' (delivered 02/05/23!)

==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T16:06:34Z

Drew: /* Saw Stop Orientation */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
'''Becoming certified to use the SawStop table saw requires the following steps:'''

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for any brake and blade replacements required due to activation of the safety system.'''

* Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.
* Make sure to properly adjust the height and angle of the blade to match the requirements of your cutting task.

* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.

==== Powering on the SawStop ====
'''The SawStop table saw will not turn on without scanning the RFID card of an authorized user.'''

* Make sure the disconnect switch is ON and the power cord is plugged in.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the blade switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

==== Operating the SawStop Table Saw ====

* Always use the SawStop guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Always unplug the power cord before making any adjustments to the blade.
* When ripping plywood or long stock, use the folding outfeed table.
* Never reach over the blade or make contact with the blade while it is in motion.
* Use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece.
* Do not cut too close to the fence
* Turn off the saw and unplug it before making adjustments or changing the blade.

==== Avoiding Kickback ====

* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* You must always use the rip fence, miter guage, or crosscut sled. Absolutely no free cuts with the tablesaw.
* Use the blade guards and riving knife.

SHutting down

Use the blade guards and clean them after each use with compressed air.
V. . Maintenance and Safety Tips

* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.
 

Introduction: The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the Table Saw Class and received RFID authorization are permitted to use the saw.

Safety First: The purpose of the class is to promote safe use of the SawStop and develop safe habits. Communication is key - inform other users in the workspace before operating the saw and make sure the area is clear. Report any damaged tools or safety incidents to the Woodshop Captains.

SawStop Basics:

*
*
*
*
*
*
* Don’t use wet, painted, or pressure-treated wood on the SawStop. Use a metal detector and moisture meter if necessary.
* Don’t cut metal on the saw.
* Don’t make adjustments to the saw or alignments. If the brake trips, contact the Woodshop Captains.
* Use the metal detector to ensure that the wood is free of nails, screws, and staples.
* Lower the blade into the cabinet after use and clean the saw.

Instructor-led Demonstrations:

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

Cleaning Up:

* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface.
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Log out and clean up after each use or risk losing access to the saw.

==SawStop Flesh Detection ==
PPM has a 5HP SawStop table saw. It is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the tablesaw.
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatment.
# '''Metal''' - Hitting a screw will trigger the cartridge and you are responsible for the $150 replacement cost. Use the metal detection wand to ensure there is no metal in your wood.
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|} 

===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
:A '''[https://www.sawstop.com/why-sawstop/ SawStop table saw]''' (delivered 02/05/23!)

==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T15:54:44Z

Drew: /* How to Become Certified */

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== How to Become Certified ====
'''Becoming certified to use the SawStop table saw requires the following steps:'''

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for any brake and blade replacements required due to activation of the safety system.'''

* Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.
* Make sure to properly adjust the height and angle of the blade to match the requirements of your cutting task.

* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.

==== Powering on the SawStop ====
'''The SawStop table saw will not turn on without scanning the RFID card of an authorized user.'''

* Make sure the disconnect switch is ON and the power cord is plugged in.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the blade switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

==== Operating the SawStop Table Saw ====

* Always use the SawStop guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Never reach over the blade or make contact with the blade while it is in motion.
* Use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Turn off the saw and unplug it before making adjustments or changing the blade.

V. . Maintenance and Safety Tips

* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.
 

Introduction: The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the Table Saw Class and received RFID authorization are permitted to use the saw.

Safety First: The purpose of the class is to promote safe use of the SawStop and develop safe habits. Communication is key - inform other users in the workspace before operating the saw and make sure the area is clear. Report any damaged tools or safety incidents to the Woodshop Captains.

SawStop Basics:

* The SawStop must only be used by members.
* Familiarize yourself with the SawStop flier to understand the terms and orientation of the saw.
* Always unplug the power cord before making any adjustments to the blade.
* When ripping plywood or long stock, ask for help or use the outfeed stand.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece or up to near the bottom of the gullet.
* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* Use the blade guards and clean them after each use with compressed air.
* Don’t damage the accurate fence by cutting too close to it. Riving knives or blade guards are not required for dado cuts.
* Always provide support with a miter gauge, rip fence, or crosscut sled.
* Don’t use wet, painted, or pressure-treated wood on the SawStop. Use a metal detector and moisture meter if necessary.
* Don’t cut metal on the saw.
* Don’t make adjustments to the saw or alignments. If the brake trips, contact the Woodshop Captains.
* Use the metal detector to ensure that the wood is free of nails, screws, and staples.
* Lower the blade into the cabinet after use and clean the saw.

Instructor-led Demonstrations:

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

Operating the SawStop:

* Make sure the disconnect switch is ON and the power cord is plugged in.
* Use your RFID to turn on the saw and wait for the ready-to-operate lights to turn green.
* Use the blade switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

Cleaning Up:

* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface.
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Log out and clean up after each use or risk losing access to the saw.

==SawStop Flesh Detection ==
PPM has a 5HP SawStop table saw. It is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the tablesaw.
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatmentl.
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|} 

===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
:A '''[https://www.sawstop.com/why-sawstop/ SawStop table saw]''' (delivered 02/05/23!)

==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]

Wood Shop — SawStop table saw

2023-03-03T15:44:25Z

Drew:

[[File:Level_3_badge.png|alt=Level 3 badge|left|frameless|100x100px]]

'''The Wood Shop Area at Pikes Peak Makerspace (PPM) consists of'''

'''both Level 2  and Level 3 equipment.'''

Additional training and certification is required to use any of our Level 3 equipment.

 Wood Shop Area  [[Wood Shop#Hand Tools|hand tools]] should be marked with '''green''' tape or paint or powder coating. 
{{Template:Is incomplete top banner}}
== Saw Stop Orientation ==

==== '''How to Become Certified''' ====
'''Becoming certified to use the SawStop table saw requires the following steps:'''

# Be a member in good standing that is certified to use the Wood Shop.
# Pass the SawStop Orientation Quiz <insert link here>
# Attend an in-person, hands on certification class ($50)

==== Getting Started ====
'''By using this tool, you accept responsibility for safe operation and agree to pay for any brake and blade replacements required due to activation of the safety system.'''

* Before using the SawStop table saw, read the [https://www.sawstop.com/wp-content/uploads/2021/10/M_ICS_WEB.pdf user manual] and become familiar with the saw's controls and features.
* Make sure to properly adjust the height and angle of the blade to match the requirements of your cutting task.

* Always wear appropriate personal protective equipment, including eye and ear protection, and a dust mask.
* Make sure you have no loose clothing, jewelry, or hair that will be anywhere near the blade.
* Be familiar with the location of the Emergency Stop Button, and practice reaching for it from your cutting stance to commit the motion to muscle memory.

==== Powering on the SawStop ====
'''The SawStop table saw will not turn on without scanning the RFID card of an authorized user.'''

* Make sure the disconnect switch is ON and the power cord is plugged in.
* Scan your door card on the TESLA box to enable the saw and wait for the ready-to-operate lights to turn green.
* Use the blade switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

==== Operating the SawStop Table Saw ====

* Always use the SawStop guard and splitter (riving knife) to keep the wood from binding and kicking back during the cut.
* Never reach over the blade or make contact with the blade while it is in motion.
* Use push sticks and push blocks to keep your hands at least 4" away from the blade.
* Turn off the saw and unplug it before making adjustments or changing the blade.

V. . Maintenance and Safety Tips

* Keep the saw's blade and guards clean and free of debris to ensure optimal performance and safety.
* Check the tightness of all bolts, screws, and other fasteners regularly to ensure that the saw remains securely in place.
* Replace worn or damaged parts as soon as possible to maintain the saw's performance and safety.
* Regularly inspect the saw for any signs of wear, damage, or other issues that could impact its performance or safety.
 

Introduction: The SawStop is a powerful and precise table saw with advanced safety features. Only members who have completed the Table Saw Class and received RFID authorization are permitted to use the saw.

Safety First: The purpose of the class is to promote safe use of the SawStop and develop safe habits. Communication is key - inform other users in the workspace before operating the saw and make sure the area is clear. Report any damaged tools or safety incidents to the Woodshop Captains.

SawStop Basics:

* The SawStop must only be used by members.
* Familiarize yourself with the SawStop flier to understand the terms and orientation of the saw.
* Always unplug the power cord before making any adjustments to the blade.
* When ripping plywood or long stock, ask for help or use the outfeed stand.
* Keep the blade height set between 1/8 to 1/4 inch above the workpiece or up to near the bottom of the gullet.
* Kickback can occur when ripping boards. Keep to the right of the blade line to avoid injury.
* Use the blade guards and clean them after each use with compressed air.
* Don’t damage the accurate fence by cutting too close to it. Riving knives or blade guards are not required for dado cuts.
* Always provide support with a miter gauge, rip fence, or crosscut sled.
* Don’t use wet, painted, or pressure-treated wood on the SawStop. Use a metal detector and moisture meter if necessary.
* Don’t cut metal on the saw.
* Don’t make adjustments to the saw or alignments. If the brake trips, contact the Woodshop Captains.
* Use the metal detector to ensure that the wood is free of nails, screws, and staples.
* Lower the blade into the cabinet after use and clean the saw.

Instructor-led Demonstrations:

* The normal blade guard is used for rips and crosscuts.
* The instructor will show you how to install the riving knife for non-thru cuts or rabbets.
* The limit rod should remain on the blade guard.
* The kickback pawls can be enabled or disabled depending on your needs.
* The blade height should be set so that the gullet is above the wood piece.

Operating the SawStop:

* Make sure the disconnect switch is ON and the power cord is plugged in.
* Use your RFID to turn on the saw and wait for the ready-to-operate lights to turn green.
* Use the blade switch to turn on and off the blade.
* After use, drop the blade into the cabinet, clean the saw, and log off using your RFID.

Cleaning Up:

* Dust off the surface and clean around the base after each use.
* Close the dust door below the table surface.
* Don’t leave any scraps - dispose of them in the bin or dumpster.
* Log out and clean up after each use or risk losing access to the saw.

==SawStop Flesh Detection ==
PPM has a 5HP SawStop table saw. It is a high-quality saw that is designed for safety and performance.

It features a flesh detection technology that can quickly stop the blade in the event of accidental contact with a user's skin.

* In the event of flesh detection, a single use cartridge fires and seizes the blade before damage to the user is inflicted.
* Both the cartridge and blade must be replaced before the SawStop can be used again.
* It is important that the user be aware of ways the SawStop can be triggered accidentally, as the user will be responsible for the cost of a new blade and cartridge.

==== Avoiding False Triggers ====
Although uncommon, it is possible to have a false flesh detection. If a false trigger occurs for any reason, you are responsible for the replacement cost of the cartridge and blade (about $150).
# '''Moisture in the Wood''' can cause false triggers in the SawStop's flesh detection technology. To avoid false triggers from moisture, it's important to properly test the moisture content of the wood before cutting and to ensure that the moisture content is below 10%. Here are the steps to properly test the moisture content.
## Use the moisture meter: You will need a moisture meter to accurately measure the moisture content of the wood. There are a variety of moisture meters available, ranging from simple pin-style meters to more advanced meters with digital displays.
## Test several locations: It's important to test several locations on the piece of wood, as the moisture content can vary from one area to another. Aim to test at least 3-4 different spots on each piece of wood.
## Take readings: Place the moisture meter probe on the surface of the wood and take a reading. Repeat this process for each of the test locations.
## Evaluate the results: Compare the readings from each location to determine the average moisture content of the wood. Ideally, the moisture content should be below 10% to reduce the likelihood of a false trigger. If the moisture content is higher than 10%, allow the wood to dry out further before cutting it on the SawStop table saw.
##* It's important to note that moisture meters are not foolproof and can sometimes give inaccurate readings. However, they are still a valuable tool for monitoring the moisture content of wood and reducing the risk of false triggers.
##* By properly testing the moisture content of the wood before cutting and ensuring that the moisture content is below 10%, you can reduce the likelihood of a false trigger due to moisture and ensure a safe and successful cutting experience with the SawStop table saw.
# '''Laser-Cut/Engraved Wood''' can cause false triggers and should not be used on the tablesaw.
# '''Treated Lumber''' can cause a false trigger because of the copper used in the treatmentl.
Access to the flesh detection bypass keys may be requested to a shop captain.
*

===Tips===
:[https://www.sawstop.com/how-tos/tips-tricks/ '''SawStop TIPS & TRICKS''']

===For Additional Help===
:Use the PPM Slack channel #wood-shop

==Equipment List==
===SawStop Equipment List===
{| class="wikitable sortable"
|- style="font-weight:bold; text-align:center; font-family:Arial, Helvetica, sans-serif !important;; background-color:#42B649; color:#ffffff;"
| style="vertical-align:middle;" |'''Picture'''
|'''Item'''
|'''Manufacturer'''
|'''Model Number'''
|Power Requirements
|'''Manual'''
|'''Estimated Value'''
|'''Owner'''
|-
|[[File:SawStop crate.jpg|alt=SawStop crate|center|frameless|174x174px]]
|'''SawStop'''
'''10" Industrial'''
'''Cabinet Saw'''
[[File:Level 3 badge.png|alt=Level 3 badge|left|frameless|41x41px|link=https://wiki.pikespeakmakerspace.org/index.php/File:Level_3_badge.png]]
|[https://www.sawstop.com/ SawStop]
|ICS53480
|Three Phase
|[https://www.youtube.com/@sawstop '''SawStop on YouTube''']
|?
|PPM
(delivered 02/05/23!)
|-
|<center>'''Picture'''</center>
|<center>'''Item'''</center>
|<center>'''Manufacturer'''</center>
|<center>'''Model Number'''</center>
|<center>'''Power Requirements'''</center>
|<center>'''Manual'''</center>
|<center>'''Estimated Value'''</center>
|<center>'''Owner'''</center>
|} 

===[[Donations Received]]===
===[[Wish List#Wood Shop|Wish List]]===
:A '''[https://www.sawstop.com/why-sawstop/ SawStop table saw]''' (delivered 02/05/23!)

==Benefits and Policies==

{{Member Benefits}}

===[https://pikespeakmakerspace.org/reserve-equipment Equipment Reservations]===
===Materials===
:'''Donate for "Sheet Goods" via PayPal: [https://bit.ly/ppmstuff bit.ly/ppmstuff]'''
:'''Or, leave donations in a black payment box, or use a QR code.'''

===[[New Member Orientation#Red Tags|Red Tags]]===
{{Scrap and Trash}}

==Software==
Links to other PPM Wiki pages (internal links):
:[[Autodesk Fusion 360 Tips|'''Fusion 360''']]
:[[VCarve Tips|'''VCarve''']]

==Member Showcase==
 
 
{{Template:Showcase_blurb}}

==See Also==
Links to other PPM Wiki pages (internal links):
:'''[[Wood Shop]]'''
:'''[[CNC|CNC Area]]'''
:'''[[Metal Shop]]'''
:'''[[Shed]]'''

==Curated Links==
Links to other sites (external links):
:'''[https://www.librarything.com/catalog/PikesPeakMakerspace/woodworking LibraryThing] -- Our wood working-related books'''

==Other Fun Stuff==
Links to other sites (external links):
:'''[https://www.finewoodworking.com/shop-tips Fine Wood Working Magazine Shop Tips]'''
 
<hr>
{{Template:Footer}}

[[Category:Incomplete]]
[[Category:Volunteers Needed]]